Roadmaster Rear Anti-Sway Bar Installation - 2018 Ford F-53 RM-1139-145- Video

Rob: Rob here at etrailer.com, and today you're going to be taking a look at the Roadmaster rear anti-sway bar on our 2018 Ford F-53 Chassis Motorhome. Now, whether you're new to driving a motor home or you've been doing it for a while, you'll realize real quickly how unstable they feel and just kind of how much body roll and uncomfortable the ride is. Because when we're going down the highway, let's face it, there's a lot of area here for that wind to catch, and we end up getting pushed around. So we end up fighting the steering wheel, trying to stay in our lane, or if we're going down some bumpy roads, we ended up getting jostled around. By the time when we get where we're going, we're extremely tired. Not to mention everybody in the back's getting tossed around. more

Watch Video

9/23/2019 11:28:24 AM

Roadmaster Rear Anti-Sway Bar Installation - 2019 Ford E-Series Cutaway- Video

Ryan: How's it going Ryan here at etrailer.com. Today, on our 2019 Ford E-Series cutaway, we're going to be taking a look at and showing you how to install the Roadmaster rear anti-sway bar. Now, our motorhomes are big squares that are known to be top heavy, which can be really difficult to drive straight down the road, especially on those windy days or on that bumpy terrain. Well, that's where the rear sway bar is going to come into play. It's going to help stiffen up that chassis and help eliminate that sway in the motorhome, making it a lot easier to keep in a straight line and drive without worrying too much. Now, since the sway bar is in the back, it's really only going to help combat that sway here in the rear of the camper, but to help offset that and do the same thing upfront, I'd recommend the Roadmaster front anti-sway bar.Now, let's go ahead and take our motorhome on the test course. more

Watch Video

8/30/2019 7:52:22 AM

Roadmaster Front Anti-Sway Bar Installation - 2019 Ford E-Series Cutaway- Video

Ryan: How's it going, everyone Ryan here at etrailer.com. Today on our 2019 Ford E-Series Cutaway, we're going to be taking a look at and showing you how to install the Roadmaster Front Anti-Sway Bar. Motor homes are big boxes that are very top heavy. So when you're going down the road, they're known to catch a lot of wind and have a lot of body roll or sway. That's when the camper goes back and forth. Now that can be very nerve wracking at times. more

Watch Video

8/29/2019 10:28:31 AM

Roadmaster Rear Anti-Sway Bar Installation - 2015 Ford F-53 RM-1139-146- Video

Hey there motor home owners today, and your 2015 motor home with the Ford F53 chassis, we're going to be taking a look at and showing you how to install Roadmaster's rear anti sway bar. And this is what your sway bar's going to look like when it's installed. It's going to work with your factory sway bar, which is located just on the other side of your axle. So you're going to have double the amount of anti sway on your vehicle.That auxiliary sway bar that we've added here is a thicker diameter bar, so it's going to be even stronger than the factory bar that's located on the other side. So what this means for you is that over the life of your RV, you're going to experience less sway. So you won't have so much rocking back and forth. more

Watch Video

6/13/2019 1:42:18 PM

Roadmaster Rear Anti-Sway Bar Review and Installation - 2014 Ford F-53- Video

Hey there road warriors. Today on our 2014 Ford F-53 chassis we're going to be installing a Roadmaster's Rear Anti-Sway Bar. This is what your sway bar is going to look like once you've got it installed. After you've got it installed, once you get out on the road you'll notice the difference immediately. It's going to help provide a safer ride by reducing the amount of sway when going down the road. So if you've got wind hitting the side of your RV it'll help stop that rocking motion and minimize it making it easy for you to maintain control of the vehicle. more

Watch Video

4/16/2019 2:07:20 PM

Roadmaster Front Anti-Sway Bar Review and Installation - 2014 Ford F-53- Video

Hey there road warriors. Today on your 2014 Ford F53 chassis, we're going to be installing Roadmaster's front anti-sway bar. This is what our front anti-sway bar's going to look like when it's installed. It replaces our factory original sway bar. It's going to offer you a more comfortable, safer driving experience. The sway bar works with your existing suspension to help remove sway and keep the vehicle centered upright. more

Watch Video

4/16/2019 1:57:44 PM

Roadmaster Front Anti-Sway Bar Installation - 2018 Ford E-Series Cutaway- Video

Today on our 2018 Jayco Greyhawk Ford E Series Cutaway, we're gonna be taking a look at, and showing you how to install the Roadmaster Front Anti Sway Bar for Motor Homes.You can see the difference between our old sway bar, and our new sway bar. You can tell how much bigger our new ones is. This is gonna give us quite a bit more stability than our old one. Our new one is gonna be constructed of 4140 chrome alloy steel. This is really going to reduce the amount of sway and body roll you get in an RV. You're also going to get new polyurethane bushing, or urethane bushings. more

Watch Video

2/6/2019 3:13:51 PM

Roadmaster Front Anti-Sway Bar Installation - 2018 Ford F-53- Video

Today on our 2018 Ford F-53 Chassis Motorhome, we're going to be taking a look at and showing you how to install the Roadmaster Front Anti-Sway Bar, part number RM-1139-140. Having a motorhome can be great, but one thing that nobody really seems to talk about is how difficult it can be to drive sometimes. Because let's face it, we have a large area for wind to catch that can start pushing us around when we're driving down the road, which can be a little spooky for some people, and not that enjoyable.What our Roadmaster Anti Sway for side to side movement, what a good set of shocks would do for the up and down. It's going to take a lot of that pressure off, and we're not going to have so much wind, feeling like it's pushing us around, which means we can relax more and not fight that steering wheel. So here, you can see the difference between our factory sway bar and our new Roadmaster. Our factory one is going to be an inch and a half in diameter, whereas our Roadmaster is going to be an inch and three quarters in diameter. more

Watch Video

12/11/2018 12:07:10 PM

Roadmaster Rear Anti-Sway Bar Installation - 2018 Ford F-53 RM-1139-146- Video

Today on our 2018 Ford F53 chassis motorhome, we're going to be taking a look at, and showing you how to install the Roadmaster rear anti-sway bar, part number RM-1139-146.Having a motor home can be very nice thing. But one thing that nobody really talks about is how difficult they can be to drive, and how much swing they get, and kinda that body roll. Especially when we're driving down the highway, a big crosswind comes by, and it starts pushing us around. Because let's face it, there's a lot of area for that wind to catch.That's where our Roadmaster anti-sway bar's going to come into play. It's going to reduce the amount that we're going to have to fight the steering wheel back and forth, which in then turn we can relax a little bit, have more confidence when we're driving down the road.So here's what our sway bar looks like once we have it installed. The sway bar itself is going to be an inch and a half in diameter. more

Watch Video

12/10/2018 1:07:14 PM

Roadmaster Reflex Steering Stabilizer Installation - 2018 Ford F-53- Video

Today on our 2018 Ford F53 Chassis Motor-home, we're gonna be taking a look at and showing you how to install the Road Master Reflex Steering Stabilizer, Part Number RM-RBK22-RSSA.A lot of things can cause our motor-home to veer, whether it be uneven pavement, a really strong crosswind, or even just the crown on the road. Once it starts to veer we have to fight that steering wheel to get our motor-home back to center. That can be extremely tiresome, especially on those long trips. Our Road Master Reflex Steering Stabilizer is going to minimize a lot of that. We're not gonna feel so tired, because we're not gonna have to fight the steering wheel trying to get it back to center.Here's where our steering stabilizer is gonna look like once we have it installed. Our steering stabilizer is gonna have this spring, when it's in the center position it'll have a little bit of tension, but once we turn one way the spring is gonna extend and naturally wanna come back to its resting state. more

Watch Video

12/10/2018 1:02:14 PM

Roadmaster Reflex Steering Stabilizer Installation - 2012 Ford F-53- Video

Speaker 1: Today on our 2012 Ford F-53 chassis we're going to be installing Roadmaster's Reflex Steering Stabilizer Part Number RM-RBK22-RSSA. This steering stabilizer is going to help reduce fatigue when driving down the road. The large spring and dampener will absorb shocks on the road from uneven pavement, potholes and rough terrain. What this means for you is that when you're driving down the road it's going to easier to maintain a straight line in your vehicle so you're going to have a safer journey to your destination.Additionally, since it's doing some of the work for you with its gash shock dampener and the large spring that helps return it to center you're going to have more energy when you get to your destination because it's going to help bring that back to center without you having to do it all yourself, struggling to maintain that straight line. It comes with everything you need to get it installed. I'll show you how to do that now.You'll begin your installation by parking your vehicle on level ground with the steering wheel completely straight. more

Watch Video

11/7/2018 10:27:13 AM

Roadmaster Rear Anti-Sway Bar Installation - 2012 Ford F-53- Video

Speaker 1: Today on our 2012 Ford F53 chassis, we're going to be installing Roadmaster's rear anti-sway bar, part number RM-1139-149.This sway bar works in conjunction with your factory sway bar to further eliminate sway. The additional diameter and extra strength of the beam will help to eliminate any rocking back and forth from uneven terrain by pulling the vehicle back to center and upright. What this means for you is you'll have less driver fatigue. If the vehicle's not rocking back and forth as much as it used to, you have less compensation at the steering wheel to maintain proper safe direction of the vehicle. When you get to your destination, you'll have more energy to do the things you enjoy doing.It's easy to install. There's no drilling required. more

Watch Video

11/6/2018 1:37:13 PM

Roadmaster Front Anti-Sway Bar Installation - 2012 Ford F-53- Video

Speaker 1: Today on our 2012 Ford F350 3-Chassis, we're going to be installing Roadmaster's front anti-sway bar, part number RM-1139-140. This sway bar is going to help reduce fatigue when going down the road. It does this by reducing the amount of sway when hitting any uneven terrain or on windy days. Less sway means less back and forth you're going to have the fight the wheel to maintain a straight line. This sway bar is going to be a replacement for your existing factory sway bar, so it's going to be a more heavy duty sway bar, it's going to have even more anti-sway properties.We'll begin our installation under the front of our RV by removing the original sway bar. We need to remove both the bolts located here on our hold down bracket. more

Watch Video

11/6/2018 10:22:24 AM

Roadmaster Front Anti-Sway Bar Installation - 2017 Ford E-Series Cutaway rm-1139-176- Video

Speaker 1: Today in this 2017 Ford E series cutaway, we'll be having a look at and showing you how to install the Roadmaster front anti-sway bar, part number RM-1139-176.We have a look under the front of our RV, and look at our factor sway bar here, you can see how small in diameter it is. By being a small diameter, it's not going to be very rigid. This isn't going to help us too much in minimizing the side-to-side movements of a motor home as we drive down the road. It's also going to tend to lead us to have a little bit more body roll than we would like to have.We hold up our replacement sway bar to it, you can see how much thicker in diameter it is. This is going to make it more rigid and help minimize the amount of body roll and side-to-side movement we're going to have as we drive down the road, giving us the stability and the safety that we're looking for. Here's what our replacement sway bar looks like installed. more

Watch Video

10/19/2018 3:02:15 PM

Roadmaster Front Anti-Sway Bar Installation - 2017 Ford F-53- Video

Speaker 1: Today on our 2017 motorhome on our F53 chassis, we're going to be taking a look at, and I'm going to show you how to install, the Roadmaster Front Anti-Sway Bar for Motorhomes, part number RM-1139-140.This is what our anti-sway bar looks like when it's installed. What this is going to do for you is exactly what the name of it is. It's going to reduce swaying. Because the vehicle is so heavy and so tall, when you're going down the highway, you get a crosswind, the top of the vehicle wants to lean. It wants to pull you. This is going to reduce that body roll and that sway. more

Watch Video

9/5/2018 12:17:13 PM

Roadmaster Reflex Steering Stabilizer Installation - 2018 Ford E-Series Cutaway- Video

Speaker 1: Today on our 2018 Ford E-Series cutaway, we're gonna be taking a look at, and I'm gonna show you how to install, the Road Master Reflux steering stabilizer with mounting bracket for class C motor homes, part number RM-RBK24-RSSC.This is what our steering stabilizer looks like when it's installed. What this is gonna do, it's gonna help you keep your vehicle going down the road straight. What I mean by that is, is if you're driving your RV down the highway and you hit a crosswind or maybe you passed a semi trailer, you know how big those are, and when they push that wind, because the RV is top heavy, it wants to lean. When it leans, the driver has to fight the steering wheel. It causes fatigue. What this is gonna do for you, say you turn one way and it compresses, when you let go of the steering wheel, that spring is gonna force it to come back out, and bring your steering wheels back to straight. more

Watch Video

8/6/2018 1:12:11 PM

Roadmaster Reflex Steering Stabilizer Installation - 2017 Ford E-Series Cutaway- Video

Speaker 1: Today on our 2017 Ford E-Series Cutaway we're gonna be installing the roadmaster reflex steering stabilizer. Part number RM-RBK24-RSSC. This is what our steering stabilizer's gonna look like when it's installed. As you can see it's much more robust than our original, and it has a coil spring to help assist returning it to center.The biggest difference that sets this one apart from the others is the coil spring. When the coil spring is compressed, it's gonna wanna uncompress itself, returning it to center. And when it's extended, it's gonna wanna retract, again bringing it back to center. more

Watch Video

6/25/2018 3:27:36 PM

Roadmaster Rear Anti-Sway Bar Installation - 2016 Ford F-53 1139-144- Video

Speaker 1: Today on our 2016 ACE Thor Motorcoach on the Thor F-53 Chassis we're gonna take a look at showing you how to install the Roadmaster rear anti sway bar, part number 113-144. We will also be using the extended U bold kit for Roadmaster anti sway bars, part number RN-590050-00.This kit is gonna come with a 1-3/4 inch diameter sway bar designed to improve the handling of your vehicle by reducing body roll and balancing the weight transfer during cornering. It's gonna come with all necessary hardware to get it installed.To begin installation, what we're gonna be doing is we're gonna be taking this plate off and we're gonna be replacing these U bolts. And before doing that, if you're going to do this and lift the vehicle where your wheels are off the ground, you wanna make sure you put jack stands and support this axle. Because what's gonna happen is when you take this plate off, the axle will drop. So you need to make sure you have it sitting on something.What you're gonna wanna do is you're gonna wanna spray down each bolt with some lubrication, just gonna help these come off a little bit easier. more

Watch Video

6/1/2018 11:32:18 AM

Roadmaster Rear Anti-Sway Bar Installation - 2017 Ford F-53- Video

Speaker 1: Today, on our 2017 Newmar Canyon Star on our Ford F-53 Chassis, we're going to be taking a look at and showing you how to install the ROADMASTER rear anti-sway bar. Part number RM-1139-149. Customer: I've had it for five months now, and we've already put 10,000 miles on it, and when we drove from Kansas City to Minot, North Dakota and back, we've got a lot of crosswinds and stuff. And although this thing handles pretty good, when you get in the crosswinds and you get a lot of tractor trailers flying by you, it takes off and will try to push you off to the side and then, suck you back onto the road, and I didn't like that. So we started looking for some enhancements to enhance the handling and stability of it, and found etrailer online, and I had looked at them before for some other stuff years ago and used them. So I thought, "Let me check and see if they've got anything," and sure enough, they did, and we ordered it, didn't quite get everything we we're trying to get. more

Watch Video

5/14/2018 2:02:35 PM

Roadmaster Rear Anti-Sway Bar Installation - 2017 Ford F-53 RM-1139-146- Video

Speaker 1: Today on our 2017 Coachman Pursuit on the Ford F-53 chassis we're going to take a look at and also show you how to install the Roadmaster rear anti-sway bar. Part number is RM-1139-146.Now here's what our sway bar's going to look like installed. Now the need for a sway bar comes from motor homes just like what we've got here. They have higher centers of gravity, so as we're traveling down the road we get a crosswind that wants to tip the top of our RV side to side. Uneven pavement, ruts in the road, there's several symptoms like you're passing semis that start that sway in your coach. With our upgraded sway bar in place, we get a connection point from our axle right here up to the frame. more

Watch Video

2/6/2018 3:29:56 PM

Roadmaster Rear Anti-Sway Bar Installation - 2004 Ford F-53- Video

Speaker 1: Today, on our 2004 Ford F-53 motorhome, we're going to be taking a look at and showing you how to install the Roadmaster Anti-Sway Bar, Part #1139-144. Here's what our sway bar looks like fully installed. It's going to supplement our factory-existing sway bar, and give us a little more stability in the rear end. It's made of a solid steel construction, so there's no welds or any weak points for it to break. The bar itself is an inch and three-quarters thick. Our sway bar does feature polyurethane bushings, which are going to give it a little bit of cushion, so it's a little bit more comfortable. more

Watch Video

12/19/2017 11:57:12 AM

Roadmaster Reflex Steering Stabilizer Installation - 2016 Ford E-Series Cutaway- Video

Speaker 1: Today on our 2016 Ford E-450 Chassis Class C Motorhome, we're gonna be taking a look at, and showing you how to install, the Roadmaster Reflex Steering Stabilizer with Mounting Brackets for Class C Motorhomes, part number:RM-RBK24-RSSC.Here's what our steering stabilizer looks like fully installed. It's gonna replace our factory stabilizer, and it's gonna help maintain the vehicle tracking down center, and help correct over steering. Now, there is a variety of things that can make your vehicle veer; whether it be cross winds, uneven pavement, or even a tire blowout, the key to a pleasant and safe driving experience is learning how to deal with these situations. Our steering stabilizer is gonna work to return the vehicle to center when something happens that causes it to swerve or jolt. The steel spring is gonna be working constantly to help maintain the vehicle going in a forward, neutral position. When it's compressed, the spring is gonna push back out, and when the spring is extended, it's gonna be pulling back in.Whether you're upgrading from your factory one, or replacing it, it's definitely gonna have a lot more tension than our factory stabilizer here. more

Watch Video

12/4/2017 2:49:28 PM

Roadmaster Rear Anti-Sway Bar Installation - 2015 Ford E-Series Cutaway- Video

Speaker 1: Today on our 2015 Ford E-Series Motorhome, we're going to be taking a look at and showing you how to install the Roadmaster Rear Anti-Sway Bar, part number: RM-1139-147. Here at etrailer.com, we've had a lot of customers complain about the characteristics of the way their motor home rides. Let's take a look at one of those now. Tom: Yeah, there's a lot of times that we get the body roll when we're stopping or going around a curve, where the unit will want to roll to the right or left. Speaker 1: Right. Tom: So we're hoping to minimize that for this whole unit, especially being top heavy like this. more

Watch Video

11/20/2017 1:04:07 PM

Roadmaster Front Anti-Sway Bar Installation - 2015 Ford E-Series Cutaway- Video

Speaker 1: Today on our 2015 Ford E Series Motor Home we're going to be taking a look at and showing you how to install the Roadmaster Front Anti Sway Bar, part number RM-1139-176. Here at etrailer.com we've had a lot of customers complain about the characteristics of the way their motor home rides. Let's take a look at one of those now. Tom: Yeah, there's a lot of times we get the body roll when we're stopping or going around a curve, where the unit will want to roll to the right or left. Speaker 1: Right. Tom: We're hoping to minimize that. more

Watch Video

11/20/2017 1:03:57 PM

Blue Ox TigerTrak Rear Axle Stabilizer Installation - 2017 Ford E Series Cutaway- Video

Speaker 1: Today on our 2017 Forest River Sunseeker, on the E450 chassis we're going to be taking a look at, and we're also going to show you how to install the Blue Ox TigerTrak. This is a rear axle stabilizer, part number is TT2450. The TigerTrak system is designed to keep our axle squarely under the frame of our RV. It's going to create a connection point from the axle to the frame, so they can't move side to side anymore. This helps to eliminate a lot of common problems you're going to get with RVs, especially most RVs have a real long overhang behind that axle. Once a passing vehicle or a crosswind hits the backside of this RV, it doesn't take a whole lot to get that moving side to side. more

Watch Video

9/6/2017 12:02:35 PM

Roadmaster Rear Anti-Sway Bar Installation - 2017 Ford E-Series Cutaway RM-1139-147- Video

Speaker 1: Today in our 2017 Forest River Sunseeker on the Ford E450 chassis, we're going to take a look at and show you how to install the Road Master rear anti-sway bar. Part number is RM-1139-147.Now here's our Road Master Sway Bar once we have it installed. Now this sway bar is going to do a much better job then our factory sway bar at preventing that side-to-side body roll. That's something that's typically going to happen if you're in severe crosswinds, passing an 18 wheeler, uneven road surfaces can cause the RV to lean a little bit side-to-side and ultimately that leads to you having to put more input into the steering to keep it tracking straight down the road.When we put on an upgrade this substantial you're going to have a noticeable difference in the way your RV handles so as you're cornering through mountain roads through stuff like that, you're RV will stay a lot more level, but also just in your normal straight highway style driving, a lot less driver input going in there. You're going to reduce the driver fatigue and you won't have to fight you steering wheel so much to keep going in a straight line.Now here's a good look at the difference you're going to have between the Road Master Sway Bar and your factor sway bar. The diameter of the factory sway bar is about an inch and an eighth. more

Watch Video

9/6/2017 12:02:10 PM

Roadmaster Front Anti-Sway Bar Installation - 2016 Ford F-53- Video

Today on our 2016 Forest River FR3 we're going to take a look at and show you how to install the Roadmaster Front Anti-sway Bar. Part number is RM-1139-140. Here you can see our sway bar installed. Give you a nice look. Doesn't look that much different than our factory sway bar, but it has great advantages to it in really helping to reduce driver fatigue. The wind of passing cars and things like that always tend to make it where we have to constantly correct the steering wheel and fight it down the road to get where we're going. more

Watch Video

10/24/2016 5:07:19 PM

Roadmaster Front Anti-Sway Bar Installation - 2008 Ford F-53- Video

Today on our 2008 F53 chassis motor home we're going to be taking a look at and installing the Roadmaster front anti-sway bar, part number RM-1139-140. Here's what it looks like once it's installed. It uses the frame inaudible 00:00:17 and the axle as a brace. As you go into a turn it's going to push up on one side keeping the vehicle upright to the other. Now, you can see the difference between our old sway bar and our new Roadmaster. This one's an inch and 3/4, and this one's only an inch and 3/8. more

Watch Video

7/21/2016 2:51:15 PM

Roadmaster Rear Anti-Sway Bar Installation - 2014 Ford F-53 RM-1139-145- Video

Today on our 2014 Windsport Motorhome with a Ford F53 chassiss, we'll be installing the Roadmaster Rear Anti-Sway Bar, part number RM-1139-145. Here is what our sway bar kit consists of. Obviously we have the sway bar here. It's a cadmium plated 4140 chromoly steel so it will be very weather-resistant and will resist rust for many years on down the road. We have these heavy duty in-links right here, and these brackets which the in-links will bolt to the frame on. We have our actual sway bar mounting brackets with the included polyurethane bushings. We have various mounting hardware here, and the included grease to use on our bushing here. Now this sway bar is a completely solid steel construction so it will be very rigid and will improve our handling dramatically on our motor home. more

Watch Video

6/28/2016 11:37:11 AM

Roadmaster Reflex Steering Stabilizer Installation - 2008 Ford Van- Video

Today on our 2008 Ford E-450, we're going to take a look at and show you how to install the Roadmaster Reflex Steering Stabilizer with mounting brackets for Class C Motorhomes. Part number is RM-RBK11-RSSC. All right, here's what the steering stabilizer looks like installed. As you can see, really much better looking than the standard or the factory stabilizer here on the front. We still have that element. We still have the stabilizer that's going to run right through here. more

Watch Video

4/19/2016 12:26:06 PM

Roadmaster Rear Anti-Sway Bar Installation - 2016 Ford E-Series Cutaway- Video

Today on our 2016 Ford E450 Motor Home, we're going to take a look at and show you how to install the road master rear anti-sway bar, part number RM-1139-147. Here on our factory sway bar you'll see that we're going to have a lot of axle movement in relation to the vehicle. That's going to transfer into a lot of movement at the top of our RV. This is going to make for a lot more movement in the RV as we're heading down the road, making it a little more difficult to control. Here with our new sway bar installed, you're going to see a noticeable difference. You'll also feel a difference from inside the vehicle. We don't have nearly the weight transfer side to side at the top of the RV. more

Watch Video

4/12/2016 2:38:33 PM

Roadmaster Reflex Steering Stabilizer Installation - 2016 Ford E-Series Cutaway RM-RBK11-RSSC- Video

Today on our 2016 Ford E450 Motor Home we are going to take a look at and show you how to install the Road Master Reflex Steering Stabilizer with mounting brackets for Class C Motor Homes. Part number is RM-RVK11-RSSC. Here you can see our factory stabilizer and it does an okay job of keeping our wheel from being pulled one way or another. The return to center kind of has some lag and you just don't feel like it wants to come back to the middle, it takes a lot of driver input. The Reflex Stabilizer installed, you can see of course it is going to do a good job of keeping our wheel from moving when we don't want to, but it also going to hold it in center. That way won't have to worry about our wheels being drug one way or the other. You can see as we go around the corners and it straightens back out, it returns to center much quicker, requiring a lot less driver input to get us heading the direction that we want to go. Here is what our stabilizer is going to look like installed. As you can see, really neat looking set up, you can really tell that you have upgraded this stabilizer with this set up. more

Watch Video

4/7/2016 3:45:07 PM

Roadmaster Rear Anti-Sway Bar Installation - 2015 Ford F-53 1139-144- Video

Today on our 2015 Ford F53 Chassis Motorhome we're going to be taking a look at and installing the Roadmaster Rear Anti-Sway Bar, part number 1139-144. Here we are with our manufacturer's suspension setup. As you can see, our motorhome's going to sway back and forth quite a bit, and the swaying motion's going to add fatigue to the driver trying to always keep your vehicle in a straight line. You can see as we're going, even on a straightaway here, we're getting a lot of side-to-side swaying motion, and that's causing a lot of feedback in our steering wheel from the swaying action in the rear of the motorhome. As we go back and forth now, you can see that our suspension has stiffened up a lot, and our vehicle's not swaying anywhere as near as much as it did before. It's going to give you a better feeling going down the highway. We'll begin by loosening up the four bolts that hold our four u-bolt nuts, and we're going to slide a plate up on there, and we're going to put our nuts back in place. We'll go ahead, and we're going to loosen these all up. These are going to be rather tight, so you're going to want to use a nice long breaker bar to get them loose. more

Watch Video

4/7/2016 3:44:34 PM

Blue Ox TigerTrak Rear Axle Stabilizer Installation - 2016 Ford E Series Cutaway- Video

Today on our 2016 Ford E-450 motor home, we're going to take a look at and show you how to install the Blue Ox TigerTrak rear axle stabilizer. Part number is TT2450. Right here's what our bar's going to look like once we have it installed. As you can see, axle bracket here gives us a great solid, sturdy connection point. That ties our axle directly up here to our frame. In doing this, we're going to eliminate the movement that we have here between the frame and the springs. That's going to give us a much stiffer rear end, so we're not going to have that wagging as we're heading down the road. more

Watch Video

4/7/2016 3:43:12 PM

Roadmaster Front Anti-Sway Bar Installation - 2016 Ford E-Series Cutaway- Video

Today on our 2016 Ford E450 Motor home, we are going to show you how to install the Road Master Front Anti-Sway Bar. This is part number RM-1139-176. Here is what the sway bar is going to look like when we actually get it installed on the vehicle. As you can see, it gives us a really nice look. You can tell it is definitely been upgraded, it is much beefier. What this is going to do, this is going to help our driving characteristics as we are maneuvering and making corners, it helps our vehicle stay much more flat, so we don't get that feel that we are swaying so far side to side. more

Watch Video

4/7/2016 10:31:06 AM

Roadmaster Rear Anti-Sway Bar Installation - 2006 Ford E-450- Video

Today on our 2006 Ford E450 with an RV body, we're going to review and install the Road Master rear anti-sway bar, part number RM-1139-147. With the manufacturer's sway bar, when we went over the uneven bumps we got a lot of body roll, because of the jostle and impact to the vehicle. With the new Road Master sway bar in place, we get a much firmer feel of the vehicle, not only in the steering, but also minimizes the body roll and impact from the uneven bumps or our parallel bumps, such as a speed bump. Now let's go ahead and show you how to install it. Now to begin our install, we need to remove the old or manufacturer's rear sway bar, that's just in front of and behind the rear axle. Keep in mind that each process we do here on the driver's side, is going to get repeated identically on the passenger's side, as all of our attachment points are the same. Now to start, I'm going to go ahead and spray the sway bar link - where it connects to the sway bar - threads so we can remove the nut. Over time you're going to build up with rust, dust, dirt and debris, and by spraying with a spray lubricant, you make it easier to remove them. Once we take the nut off, we can then go ahead and take off the metal washer, and the rubber bushing. more

Watch Video

6/11/2015 1:32:20 PM

Roadmaster Reflex Steering Stabilizer Installation - 2006 Ford F-450- Video

Today on a 2006 Ford E450 with an RV chassis, we're going to review and install the road master reflex steering stabilizer with mounting bracket for class C motor home. Part number R-M dash R-B-K-1-1 dash R-S-S-C. Now here's what the reflex steering stabilizer will look like once it's installed. The steering stabilizer is designed to help resist the side to side motion if you run across a pot hole or an uneven portion of the road. It'll also assist in returning the steering wheel back to the center after sharp or wide turns. Alright, now let's go and show you how to install it. Now to begin our install, we need to remove the older manufacture's steering stabilizer. Start our removal, we're going to remove the two U-bolts that secure it here to the drag lane. Next, we need to remove the three fasteners that secure the bracket to the frame. more

Watch Video

6/11/2015 10:21:06 AM

Roadmaster Front Anti-Sway Bar Installation - 2006 Ford E-450- Video

Today on our 2006 Ford E450 Super Duty, we're going to review and install the Roadmaster Front Anti-Sway Bar for Motor Homes, part number RN-1139-115. As we go down the road, it'll reduce the body roll, tire wear and driver fatigue. Now, with the old or manufacturer's sway bar link installed, we had a lot of sway when we cornered going down our slalom course. With our new Roadmaster sway bar link installed, we've taken a lot of that body roll out and sway from the top-heavy of our motor home body. As the body rolls, the sway bar will push down to compensate and try and keep the frame and body together as they corner. With the manufacturer's sway bar when we went over the uneven bumps we got a lot of body roll because of the jostle and impact to the vehicle. more

Watch Video

6/10/2015 1:44:10 PM

  2