Hollywood Racks Traveler Hitch Bike Rack Review - 2014 Nissan Rogue- Video

Today on our 2014 Nissan Rogue we'll be test fitting the Hollywood Racks Traveler Hitch Mounted 4-Bike Rack, part number HR8500. We'll begin our test fit by sliding the shank of the bike rack into the opening of the hitch. After lining up the pin holes we'll thread in our anti-rattle bolt and tighten it down using a wrench. With the bike rack secured, we'll go over a few clearance measurements to see how the two fit together. We have about 12" of ground clearance. Closest part of the bike rack to the closest part of the vehicle is about 1/4" away. There is a little bit of wiggle room in the mast but it will not come back and hit the rear of your hatch. more

Watch Video

5/27/2014 12:36:03 PM

Softride Dura Hitch Bike Rack Review - 2014 Nissan Titan- Video

Today on our 2014 Nissan Titan, we're going to be test fitting the Softride Dura Parallelogram, a tilting 4-bike rack for inch-and-a-quarter and 2-inch hitches, part number Sr26247. To begin our test fit, we'll slide the shank of the bike rack into the receiver tube of our hitch, line up our pin holes, thread in our anti-rattle bolt, and tighten it down with a wrench. We can then secure it, using the provided lock. In this position, we'll have about 19 inches worth of ground clearance. The closest point of the rack to the back of our vehicle is about 6 inches away, and overall, we've added about 35-1/2 inches to the length of the truck. The Dura Parallelogram has removable arms that allow for more storage options. more

Watch Video

4/29/2014 2:28:53 PM

Saris Axis 3 Bike Rack Review - 2014 Nissan Titan- Video

Today on our 2014 Nissan Titan, we're going to be test fitting the Saris Axis, a tilting 3-bike rack for inch-and-a-quarter and 2-inch hitches, part number SA843B. To begin our test fit, we'll slide the shank of the bike rack into the receiver tube of our hitch, line up our pin holes, thread in our anti-rattle bolt, and tighten it down with a wrench. We'll then secure it using the provided lock. In this position, we'll have about 19-1/2 inches worth of ground clearance. The closest point of our rack to the back of our vehicle is about 6 inches away, and overall, we've added about 13-1/2 inches to the length of the truck. Pulling the yellow T-handle at the base of the center mast, will allow us to tilt it away from our vehicle. more

Watch Video

4/29/2014 2:25:31 PM

Saris Freedom Hitch Bike Racks Review - 2014 Nissan Titan- Video

Today on our 2014 Nissan Titan, we're going to be test fitting the Saris Freedom. A platform style four bike rack for two inch hitches. Part number SA4414B. To begin our test fit, we'll slide the shank of the bike rack into the receiver tube of our hitch, line up our pinholes, thread in our anti-rattle bolt and tighten it down with a wrench. We'll then secure it using the provided clip. In this position we'll have about 19 inches worth of ground clearance. The closest point of the rack to the back of our vehicle's about four and a quarter inches away. more

Watch Video

4/29/2014 9:28:02 AM

Thule Helium Aero Hitch Bike Rack Review - 2014 Nissan Titan- Video

Today on our 2014 Nisan Titan, were going to be test fitting the Thule Helium Aero, a tilting two bike rack for 1-1/4 and 2 inch hitches, part number TH9042. To begin our test fit, well slide the shank of the bike rack into the receiver tube of our hitch. As we do this, well want to hold out on the attached pin. Well line up our pin holes. Allow the attached pin to fall into the pin hole. Well then turn the black knob. more

Watch Video

4/28/2014 10:50:25 AM

SportRack 3 Bike Rack Review - 2014 Nissan Titan- Video

Today on our 2014 Nissan Titan, we're going to be test fitting the Sportrack Tilting 3 Bike Rack for 1 1/14 and 2 inch hitches, part # SR2403. To begin our test fit, we'll slide the shank of the bike rack into the receiver tube of our hitch, line up our pinholes, thread in our anti-rattle bolt and tighten it down with a wrench. We can then secure it with the provided clip. In this position, we'll have about 19 1/4 inches worth of ground clearance. The closes point of the rack to the back of our vehicle is about 3 3/4 of an inch away, and overall we've added about 11 1/2 inches to the length of our truck. Pulling the black pin and clip at the base of the rack will allow us to tilt it away from our vehicle. As you can see, this allows us to fully open our tailgate. With our mast back in its upright position, we'll now pull the pin and the clip at the top of the rack. more

Watch Video

4/28/2014 10:49:52 AM

Softride Hang2 Tilting Bike Rack Review - 2014 Nissan Titan- Video

Speaker: Today on our 2014 Nissan Titan, we're going to be test-fitting the Softride Hang 2, a tilting two bike rack for 1 1/4" and 2" hitches, Part#SR27041. To begin our test fit we'll side the shank of the bike rack into the receiver tube of our hitch. Line up the pinholes. thread in our anti-rattle bolt and tighten it down with a wrench. In this position we have about 19 1/4" worth of ground clearance. The closest point of the rack to the back of our vehicle is about 4 1/2" away. And over-all we've added about 20 1/2" to the length of the Titan. Pulling the two pins at the top of the mass will allow us to swing our handle bar cradles up into position. more

Watch Video

4/28/2014 10:49:13 AM

Softride Element Hitch Mounted Bike Rack Review - 2014 Nissan Titan- Video

Today on our 2014 Nissan titan were going to be test fitting the Softride Element Parallelogram. A tilting 4 bike rack with 1 1/4 inch 2 inch 00:00:08 hitches part number SR26248. To begin our test fit, were going to side the shank of the bike rack into the receiver tube of our hitch, line up our pin holes, tread in our anti-rattle bolt and tighten it down with a wrench. In this position we have about 19 inches worth of ground clearance. Closest point of the rack to the back of our vehicles is about 4 inches away and overall weve added about 12 inches to the length of the truck.Pulling the silver pins at the top of the mast will allow us to swing out our cradle arms. Well rotate them into position and reinsert the pins into the new holes to secure them. more

Watch Video

4/28/2014 10:48:38 AM

Saris Thelma 3 Bike Rack Review - 2014 Nissan Titan- Video

Today on our 2014, Nissan Titan. We're going to be test fitting the Saris Thelma. A platform style 3-Bike rack for inch of a quarter and two inch hitches, part number SA4239B. To begin our test fit, we'll slide the shake of the bike rack into the receiver tube of our hitch. Lineup our pin holes, throw out in our anti rattle bolt and tighten it down with our wrench. We can then secure it using the provided clip. This position, we'll have about 19 in a quarter inch worth of ground clearance. more

Watch Video

4/28/2014 10:47:54 AM

Hollywood Racks Traveler Tow n Go Bike Rack Review - 2014 Nissan Titan- Video

Today on our 2014 Nissan Titan we're going to be test fitting the Hollywood Racks Traveler Tow-n-go 3 bike rack for 2 inch ball mounts, part number HR135. For today's test fit, we'll be using the Hidden Hitch ball mount with an extra long shank, part number 80232. We'll begin our test fit by sliding the shank of the ball mount into the receiver tube of our hitch, lining up our pin holes, sliding through a pin, and securing it with a clip. Now please keep in mind the ball mount, the pin and clip, and the hitch ball are all sold separately. As you can see, using the standard pin and clip does leave some play in our bike rack. If you'd like to secure it further, we do have anti-rattle devices. Just check our website for some more details. Now it's time to swing out our dual cradle arms. more

Watch Video

4/28/2014 10:45:59 AM

Saris Freedom Hitch Bike Racks Review - 2014 Nissan Pathfinder- Video

Today on our 2014 Nissan Pathfinder, we'll be test fitting the Saris Freedom hitch-mounted 4-bike rack for two-inch hitches, part number SA4414B. We'll begin our test fit by sliding the shank of the bike rack into the opening of the hitch. After lining up the pin holes, we'll thread in our anti-rattle bolt, tighten it down with a wrench, and then secure it with the clip on the other side. With the bike rack secured, we'll go over a few clearance measurements to see how the two fit together. We have about 12 inches of ground clearance. The closest part of the bike rack to the closest part of the vehicle is about five inches away, and we have added about 18 inches to the overall length of our Pathfinder. We can now pull backwards on the gray handle at the end of the platform, which will allow us to tilt the platform of the rack down. more

Watch Video

4/17/2014 10:47:38 AM

Softride Dura Hitch Bike Rack Review - 2013 Nissan Rogue- Video

Today on our 2013 Nissan Rogue well be test fitting the Softride Dura Parallelogram tilting four bike rack, part number SR26247. Well begin our test fit by sliding the shank of the bike rack into the opening of hitch. Well thread in the anti-rattle bolt and tighten it down using a wrench. With the bike rack secured well go over a few clearance measurements to see how the two fit together. We have about 11 inches of ground clearance. The closest part of the bike rack to the closest part of the vehicle is about one inch away, and weve added about 32 inches to the overall length of our Nissan Rogue. more

Watch Video

11/5/2013 10:00:22 AM

Thule Vertex 4 Hitch Bike Rack Review - 2013 Nissan Rogue- Video

Today on our 2013 Nissan Rouge, we'll be test fitting the Thule Vertex hitch mounted four-bike rack, part number TH9029. We'll begin our test fit by sliding the shank of the bike rack into the opening of the hitch. We'll line up our pin holes,tread our anti-rattle bolt and tighten it down witha wrench. With the bike rack secured, we'll go over and do clearance measurements to see how the two fit together. We have about 14inches of ground clearance. Closest part of the bike rack to the closest part of the vehicle is about two inches and we've added about eightinches to the overall length of our Nissan with the cradle arms down. more

Watch Video

11/5/2013 10:00:22 AM

SportRack Hitch Platform 4 Bike Rack Review - 2013 Nissan Rogue- Video

Today on our 2013 Nissan Rogue, we'll be test fitting this SportRack Platform Style 4-bike Rack, part number SR2902. We'll begin our test fit by sliding the shank of the bike rack into the opening of the hitch. We'll thread in the anti-rattle bolt, and then tighten it down using a wrench. With the bike rack secure, we'll go over a few clearance measurements to see how the two fit together. From the back of the bike rack, we have about 19 inches of ground clearance. From the lowest part of the bike rack, we have about 14 1/2 inches of ground clearance. more

Watch Video

11/5/2013 10:00:22 AM

Thule Helium Aero Hitch Bike Rack Review - 2013 Nissan Rogue- Video

Today on our 2013 Nissan Rogue, we'll be test fitting the Thule Helium Aero Hitch-Mounted 2 Bike Rack part number TH9042. We'll begin our test fit by sliding the shank of the bike rack into the opening of the hitch, allowingthe integrated hitch pin to fall into place, and we'll then turn the black knob to engage the anti-rattle device. With the bike rack secured, we'll go over a few clearance measurements to see how the two fit together. We have about 18 inches of ground clearance at the rear of the bike rack, and we've added about 15 inches to the overall length of our Nissan. We can now lift up on the gray lever at the top of the mast and swing the cradle arms out. With the cradle arms out, we've added about 23 and a half inches to the overall length of our Nissan. To access the cargo area, we can lift up the gray lever at the base of the bike rack and tilt the mast down. more

Watch Video

11/5/2013 10:00:22 AM

Hollywood Racks Traveler 5 Hitch Bike Rack Review - 2013 Nissan Rogue- Video

Today on our 2013 Nissan Rogue, we'll be test fitting the Hollywood Racks Traveler Hitch Mounted 5-bike Rack, part number HR9200. We'll begin our test fit by sliding the shank of the bike rack into the opening of the hitch. We'll thread in the anti-rattle bolts, and then tighten it down using a wrench. With the bike racks secured, we'll go over a few clearance measurements to see how the two fit together. We have about 11 1/2 inches of ground clearance. The closest part of the bike rack to the closest part of the vehicle is about 7 1/2 inches away. more

Watch Video

11/5/2013 10:00:22 AM

Swagman Titan Hitch Bike Rack Review - 2013 Nissan Rogue- Video

Today on our 2013 Nissan Rogue, we'll be test fitting the Swagman Titan. Hitch-mounted four-bike rack, part number S63410. We'll begin our test fit by sliding the shank of the bike rack into the opening of the hitch. We'll thread in the anti ridal 00:13 bolt, and tighten it down using a wrench. With the bike rack secure, we'll go ahead and bring out our cradle arms. We can do this by lifting up on the black lever of the mast, and swing in the mouth. To access the cargo area, we can lift up at the black lever at the base of the bike rack, and tilt the mast down. As you can see, we can easily gain access to the rear hatch. more

Watch Video

11/5/2013 10:00:22 AM

Thule Hitching Post Pro Hitch Bike Rack Review - 2013 Nissan Rogue- Video

Today on our 2013 Nissan Rogue, we'll be test fitting a Thule Hitching Post Pro, part number TH934XTR. We'll begin our test fit by sliding the shank of the bike rack into the opening of the hitch. We'll thread in our anti-rattle bolt and then tighten it down using a wrench. With the bike rack secured, we'll go over a couple clearance measurements to see how the two fit together. We have about 13-3/4 inches of ground clearance. The closest part of the bike rack to the closest part of the vehicle is about 5-1/2 inches away, and we've added about 12 inches to the overall length of our Nissan. We can now pull the gold pin at the top of the mast to swing the cradle arms out. more

Watch Video

10/29/2013 4:31:20 PM

Pro Series Q-Slot 2 and 4 Bike Hitch Bike Rack Review - 2013 Nissan Rogue- Video

Today on our 2013 Nissan Rogue well be test fitting the Pro Series Q Slot platform style two and four bike rack, part number PS63138. For todays test fit well be test fitting the two configuration for two inch hitches. Well begin our test fit by sliding the shank of the bike rack into the opening of the hitch. Well thread in our anti-rattle bolt and then tighten it down using a wrench. With the bike rack secured well go over a few clearance measurements to see how the two fit together. We have about 12 inches of ground clearance. more

Watch Video

10/29/2013 4:15:00 PM

Hollywood Racks Traveler Hitch Bike Rack Review - 2013 Nissan Rogue- Video

Today on our 2013 Nissan Rogue, we'll be test fitting the Hollywood Racks Traveler hitch mounted four bike rack, part number HR8500. We'll begin our test fit by sliding the shank of the bike rack into the opening of the hitch, while threading the anti-rattle bolts and tighten it down using a wrench. With the bike rack secured, we'll go ahead and swing out our dual arms. We'll remove the pin at the top of the mast and swing out the cradle arms, re-securing it with the pin. To access the cargo area, we can pull the pin at the base of the carrier and tilt the mast down. As you can see, we can easily gain access to the rear hatch. To load up a bike, we'll make sure the mast is in its upright position. We'll undo the cradle straps, place our bike into the frame cradles, and then secure it with the straps. With our bike all loaded up, that'll complete today's test fit of the Hollywood Racks Traveler, part number HR8500, on our 2013 Nissan Rogue. . more

Watch Video

10/29/2013 4:07:08 PM

Thule Doubletrack Hitch Bike Rack Review - 2013 Nissan Rogue- Video

Today on our 2013 Nissan Rouge, we'll be test fitting the Thule Doubletrack Platform-Style Hitch 2 Bike Rack. Part number TH990XT. We'll begin our test fit by sliding the shank of the bike rack into the opening of the hitch. We'll thread in our anti-rattle bolt and tighten it down using a wrench. With the bike rack secured, we'll go over some clearance measurements to see how the two fit together. We have about 11 and one quarter inches of ground clearance from the lowest part of the bike rack. more

Watch Video

10/29/2013 12:11:32 PM

Thule Apex 4 Swing Hitch Bike Rack Review - 2013 Nissan Rogue- Video

Today on our 2013 Nissan Rogue, we'll be test fitting a Thule Apex Swing, hitch-mounted four-bike rack, part number TH9027. We'll begin our test fit by sliding the shank of the bike rack into the opening of the hitch. We'll allow the integrated hitch pin to fall into place, and then we'll turn the black knob to engage the anti-rattle device. With the bike rack secured, we'll go over a few clearance measurements to see how the two fit together. We have about 13-1/2 inches of ground clearance. Closest part of the bike rack to the closest part of the vehicle is about 1/4 of an inch away and with the cradle arms down, we've added about 8 inches to the overall length of our Nissan. more

Watch Video

10/29/2013 12:08:56 PM

Thule Apex 4 Hitch Bike Rack Review - 2013 Nissan Rogue- Video

Today on our 2013 Nissan Rogue well be test fitting the Thule Apex hitch mounted four bike rack part #: TH9025. Well begin our test fit by sliding the shank of our bike rack into the opening of the hitch. Well allow the integrated hitch pin to fall into place and well then turn the black knob at the base of the bike rack to engage the anti-rattle device. With the bike rack secured well go over a couple of clearance measurements to see how the two fit together. We have about 15 inches of ground clearance. The closest part of the bike rack to the closest part of the vehicle is at the anti-rattle knob about a quarter of an inch away and weve added about eight inches to the overall length of our Nissan. more

Watch Video

10/29/2013 12:08:56 PM

Swagman Jackknife Bike Rack Review - 2013 Nissan Rogue- Video

Today, on our 2013 Nissan Rogue, we'll be test fitting the Swagman Jackknife, hitch-mounted two-bike rack, part number S63450. We'll begin our test fit by sliding the shank of the bike rack into the opening of the hitch. We'll thread in the anti-rattle bolt and tighten it down using a wrench. With the bike rack secured, we'll go over a few clearance measurements. We have about 12 inches of ground clearance. Closest part of the bike rack to the closest part of the vehicle is about 8 inches away, and we've added about 14 inches to the overall length of our vehicle. more

Watch Video

10/29/2013 11:52:37 AM

SportRack Super EZ Hitch Bike Rack Review - 2013 Nissan Rogue- Video

Today on our 2013 Nissan Rogue well be test fitting the Sportrack Super EZ platform style two bike rack, part number SR2901LR. Well begin our test fit by sliding the shank of the bike rack into the opening of the hitch. Well line up the pin holes, thread our anti-rattle bolt through the pin holes and tighten it with a wrench. With the bike rack secured well go over a few clearance measurements to see how the two fit together. We have about 14 inches of ground clearance. The closest part of the bike rack to the closest part of the vehicle is about five and a half inches away, and weve added about 21 inches to the overall length of our Nissan Rogue. more

Watch Video

10/29/2013 9:35:18 AM

Rhino-Rack 4 Hitch Bike Rack Review - 2013 Nissan Rogue- Video

Today on our 2013 Nissan Rouge, we'll be test fitting the Rhino Rack hitch mounted four-bike rack, part number RBC038. We'll begin our test fit by sliding the shank of the bike rack into the opening of the hitch. We'll tread our anti-rattle bolt and tighten it down using a wrench. With the bike rack secured, we'll go over and do clearance measurements to see how the two fit together. We have about 15 inches of ground clearance. Closest part of the bike rack to the closest part of the vehicle is about two inches and with the cradle arms down, we've added about 9.5 inches to the overall length of our Nissan. more

Watch Video

10/28/2013 4:41:17 PM

Prorack 4 Hitch Bike Rack Review - 2013 Nissan Rogue- Video

Today on our 2013 Nissan Rogue, we'll be test fitting the pro-rack hitch mounted four bike rack, part number PR8062404. We'll begin our test fit by sliding the shank of the bike rack into the opening of the hitch. We'll thread on our anti-rattle bolt and tighten it down using a wrench. With the bike rack secured, we'll go over a few clearance measurements to see how the two fit together. We have about 11" of ground clearance. The closest part of the bike rack to the closest part of the vehicle is about 3", and we've added about 26 1/2" to the overall length of our Nissan Rogue. To access the cargo area, we can pull the silver pen at the base of the bike rack and tilt the mast down. As you can see, we can easily gain access to the rear hatch. To load up a bike, we'll make sure the mast is in its upright position. We'll undo the cradle straps, place our bike into the frame cradles, and then secure it with the straps. With our bike all loaded up, that will complete today's test fit for the pro-rack hitch mounted bike rack, part number PR806204 on our 2013 Nissan Rogue. . more

Watch Video

10/28/2013 4:35:54 PM

Hollywood Racks Traveler Tow n Go Bike Rack Review - 2013 Nissan Rogue- Video

Today on our 2013 Nissan Rogue, we'll be test fitting the Hollywood Racks Traveler Tow and Go Hitch Mounted three bike carrier, part number HR135. For today's test fit we'll be using the hidden hitch ball mount with an extra long shank, part number 80232. We'll begin our test fit by sliding the shank of the ball mount into the opening of the hitch, we'll then secure it with the pin and clip. Keep in mind, the ball mount, the pin and clip and the hitch ball are all sold separately. To load up a bike, we'll pull out the black pin in the top of the mast and swing the cradle arms out. With the cradle arms out, we'll go ahead and undo the cradle straps and place our bike into the frame cradles. Now with our bike all loaded up. more

Watch Video

10/28/2013 4:23:25 PM

Thule Doubletrack Hitch Bike Rack Review - 2010 Nissan Altima- Video

Today on our 2010 Nissan Altima, we'll be test fitting the Thule Doubletrack Platform-Style 2 Bike Rack for both 1-1/4-inchand 2-inch hitches, part number TH990XT. To begin our test fit, we'll slide the shank of the rack into the receiver tube of the hitch, line up the pin hole, and install our anti-rattle bolt. We'll tighten with a wrench and then secure it with a lock on the other side. Now, we'll go over some key measurements. We have about 8 inches of ground clearance. The closest part of the Doubletrack to the closest part of our Altima is about 1 inch. With the Doubletrack in the folded position, we've added 8 inches to the overall length of our Altima. Now, we'll go ahead and pull the switch at the base of the Doubletrack and tilt the mast down. We'll undo our cradle straps, lift up the center mast, and put the frame hooks to the top of the mast to prepare to load our bike.With our rack unfolded, we've added 27 inches to the overall length of the vehicle. Then, we'll place our bike into the wheel trays and secure it first with the frame hooks. more

Watch Video

9/27/2013 8:25:04 AM

Softride Dura Hitch Bike Rack Review - 2012 Nissan Xterra- Video

Today on our 2012 Nissan Xterra, we'll be test fitting the Softride Dura Parallelogram tilting 4 Bike Rack, part number SR26247. We'll begin our test fit by sliding the shank of the bike rack into the receiver tube of the hitch. We'll line up the pin hole and thread in our anti-rattle bolt, tightening with a wrench. Then, we can install our lock. Now, we'll go over a few clearance measurements. We have about 16 inches of ground clearance. The closest point of the bike rack to the rear of our vehicle is right here at the top and is about 7 inches away. We've added about 36 inches to the overall length of our Xterra. We'll undo the cradle straps to expose our cradles, grab our bike, place it onto the frame cradles, and secure it by tightening each strap. more

Watch Video

9/18/2013 3:47:15 PM

Yakima DoubleDown Ace Hitch Bike Rack Review - 2012 Nissan Xterra- Video

Today, on our 2012 Nissan Xterra we will be test fitting the Yakima DoubleDown Ace 4-bike rack, part number Y02451. We will begin our test fit by sliding the shank of the carrier into the receiver tube of the hitch. We will line up the pin hole and install the attached pin. Here at the rear of the shank we will tighten the hand knob to secure our bike rack to our vehicle and engage our anti-rattle device. Now, we will go over a few clearance measurements. We have about 16 inches of ground clearance. The closest point of the bike rake to the rear of our vehicle is about 8 inches. more

Watch Video

9/18/2013 2:29:20 PM

Yakima DoubleDown Ace 2 Bike Rack Review - 2012 Nissan Xterra- Video

Today on our 2012 Nissan Xterra, well be test fitting the Yakima DoubleDown Ace Two Bike Rack for 1-1/4 and 2 inch hitches, part number Y02450. Well begin our test fit by sliding the shank of the carrier into the receiver tube of the hitch. Well line up the pin hole and install the attached pin, and then move to the rear of the shank and use the hand knob to secure our bike rack to our vehicle and engage our anti-rattle device. Now well go over a few clearance of measurements. We have about 16 inches of ground clearance. The closest point of the bike rack to the rear of our Xterra is about 8-1/2 inches away. more

Watch Video

9/18/2013 2:28:32 PM

Thule Vertex 4 Hitch Bike Rack Review - 2012 Nissan Xterra- Video

Today on our 2012 Nissan Xterra, we'll be test fitting the Thule Vertex 4 Bike Rack, part number TH9029. We'll begin our test fit by sliding the shank of the bike rack into the receiver tube of the hitch. We'll line up the pin holes and install our anti-rattle bolt, tightening it with a wrench. Now we'll go over a few clearance measurements. We have about 17 inches of ground clearance. The closest point of the bike rack to the rear of our vehicle is about 8 inches. more

Watch Video

9/18/2013 12:57:04 PM

Thule Hitching Post Pro Hitch Bike Rack Review - 2012 Nissan Xterra- Video

Today on our 2012 Nissan Xterra we'll be test fitting the Thule Hitching Post Pro Folding, Tilting, Four Bike Rack, part number TH934XTR. We'll begin our test fit by sliding the shank of the bike rack into the receiver tube of the hitch. We'll line up the pinhole and then thread in our anti-rattle bolt, tightening with a wrench. Now we'll go over some clearance measurements. We have about sixteen inches of ground clearance. The closest point of the bike rack to the rear of our Xterra is about nine and a half inches. more

Watch Video

9/18/2013 12:48:17 PM

Thule Helium Aero Hitch Bike Rack Review - 2012 Nissan Xterra- Video

Today, on our 2012 Nissan Xterra, we'll be test fitting the Thule Helium Aero two bike rack, part number TH9042. To begin our test fit, we'll slide the shank of the carrier into the receiver tube of the hitch and allow the attached pin to fall into place. We can then use the hand knob at the rear to secure our bike rack to our vehicle and engage our anti-rattle device. Now, we'll go over a few clearance measurements. We have about 20 inches of ground clearance. The closest point of the bike rack to the rear of our vehicle is about six and a half inches. We've added about 20 inches to the overall length of our Xterra. We'll pull the lever at the base of the bike rack and allow it to tilt away from our vehicle. This hives us full access to our rear hatch. more

Watch Video

9/18/2013 12:46:47 PM

Thule Doubletrack Hitch Bike Rack Review - 2012 Nissan Xterra- Video

Today on our 2012 Nissan Xterra, we'll be test fitting the Thule Doubletrack Platform-Style 2-Bike Rack for 1 3/4 and 2 hitches, part number TH990XT. Well begin our test fit, by sliding the shank of the bike rack into the receiver tube of the hitch. Well line up the pin hole and thread in our anti-rattle bolt, tightening with a wrench. Now, well go over a few clearance measurements. We have about 16 of ground clearance. The closest point of the bike rack to the rear of our Xterra is about 5. more

Watch Video

9/18/2013 9:48:22 AM

Thule Apex 4 Swing Hitch Bike Rack Review - 2012 Nissan Xterra- Video

Today on our 2012 Nissan Xterra, well be test fitting the Thule Apex Swing 4-Bike Rack, part number TH9027. Well begin our test fit by sliding the shank of the bike rack into the receiver tube of the hitch. Then we can allow the attached pin to fall into place. We use the hand knob to secure our bike rack to our vehicle and engage our anti-rattle device. Now well go over a few clearance of measurements. We have about 17 inches of ground clearance. more

Watch Video

9/17/2013 2:01:38 PM

Thule Apex 4 Hitch Bike Rack Review - 2012 Nissan Xterra- Video

Today, on our 2012 Nissan Xterra, we'll be test fitting the Thule Apex four bike rack, part number TH9025. We'll begin our test fit by sliding the shank of the carrier into the receiver tube of the hitch. We'll line up the pin holes and allow the attached pin to fall into place. We can then use the hand knob to secure our bike rack to our vehicle and engage our anti-rattle device. Now, we'll go over a few clearance measurements. We have about 17 inches of ground clearance. The closest point of the bike rack to the rear of our vehicle is about six inches. We've added about 16 inches to the overall length of our Xterra. We'll pull the lever at the base of the mast to allow it to tilt away from our vehicle. more

Watch Video

9/17/2013 1:41:03 PM

Swagman Titan Hitch Bike Rack Review - 2012 Nissan Xterra- Video

Today on our 2012 Nissan Xterra, well be test fitting the Swagman Titan Four Bike Rack for 1-1/4 and 2 inch hitches, part number S63410. To begin our test fit, well slide the shank of the carrier into the receiver tube of the hitch. Well line up the pin hole and thread in our anti-rattle bolt tightening with a wrench. Now well go over a few clearance of measurements. We have about 19-1/2 inches of ground clearance. The closest point of the bike rack to the rear of our vehicle is about 11 inches. more

Watch Video

9/17/2013 1:30:18 PM

Pro Series Q-Slot 2 and 4 Bike Hitch Bike Rack Review - 2012 Nissan Xterra- Video

Today on our 2012 Nissan Xterra, well be test fitting the Pro Series Q Slot platform-style two bike rack part number PS63138. To begin our test fit we'll slide the shank of the bike rack into the receiver tube of the hitch. Well line up the pin hole, thread in our anti-rattle bolt, and tighten with a wrench. Now well go over a few clearance measurements. We have about 17 inches of ground clearance. The closest point of the bike rack to the rear of our Xterra is about 11 inches, and weve added about 27 inches to the overall length of our Nissan. more

Watch Video

9/17/2013 9:26:25 AM

Prorack 4 Hitch Bike Rack Review - 2012 Nissan Xterra- Video

Today on our 2012 Nissan Xterra, we'll be test-fitting the Prorack four bike rack, part number PR 8062404. We'll slide the shank of the bike rack into the receiver tube of the hitch, line up the pin hole, and thread in our anti-rattle bolt, tightening with a wrench, and installing the clip on the other side. Now we'll go over a few clearance measurements. We have about 16 inches of ground clearance. The closest point of the bike rack to the rear of our Xterra is about 9 inches. We've added about 32 inches to the overall length of our vehicle. We'll pull the pin and clip at the base of the bike rack and allow it to tilt away from our Xterra. This gives us full access to our rear hatch. more

Watch Video

9/17/2013 9:22:07 AM

Kuat Sherpa Hitch Bike Rack Review - 2012 Nissan Xterra- Video

Today, on our 2012 Nissan Xterra, we'll be test-fitting the Kuat Sherpa Aluminum Platform-Style Hitch Mounted 2 Bike Rack, part number S102. To begin our test-fit, we'll slide the shank of the bike rack into the receiver tube of the hitch, line up the pin hole, and install our pin and lock. We'll then use the hand-knob here at the rear of the shank to secure our bike rack to our vehicle, and engage our anti-rattle device. Now, we'll go over a few clearance measurements. We have about twenty inches of ground clearance. The closest point of the bike rack to the rear of our Xterra is about five inches. more

Watch Video

9/17/2013 9:16:15 AM

Hollywood Racks Traveler 5 Hitch Bike Rack Review - 2012 Nissan Xterra- Video

Today on our 2012 Nissan Xterra, we'll be test-fitting the Hollywood Racks Traveler five bike rack, part number HR 9200. To begin our test-fit, we'll slide the shank of the carrier into the receiver tube of the hitch, line up the pin hole, and thread in our anti-rattle bolt. Now we'll go over a few clearance measurements. We have about 16 and a half inches of ground clearance. The closest point of the carrier to the rear of our vehicle is about 10 inches. We've added about 17 inches to the overall length of our Xterra. We'll pull the pin and clip at the base of our bike rack to allow it to tilt away from our Xterra. This gives us full access to our rear hatch. more

Watch Video

9/17/2013 9:10:55 AM

Hollywood Racks Traveler Hitch Bike Rack Review - 2012 Nissan Xterra- Video

Today on our 2012 Nissan Xterra, well be test fitting the Hollywood Racks Traveler 4-Bike Rack for 1-1/4 and 2 inch hitches, part number HR8500. To begin our test fit, well slide the shank of the bike rack into the receiver tube of the hitch. Line up the pin hole and thread in our anti-rattle bolt tightening with a wrench. Now well go over some clearance of measurements. We have about 16-1/2 inches of ground clearance. The closest point of the bike rack to the rear of our Xterra is about 8 inches. more

Watch Video

9/16/2013 4:35:56 PM

Yakima DoubleDown Ace Hitch Bike Rack Review - 2013 Nissan Frontier- Video

Today on our 2013 Nissan Frontier well be test fitting the Yakima Doubledown Ace Four Bike Rack, part number Y02451. To begin our test fit well slide the shank of the bike rack into the receiver tube of the hitch, line up the pin hole and installed the attached pin. Here at the rear of the shank well tighten the hand knob to secure our bike rack to our vehicle and engage our anti-rattle device.Now well go over some clearance measurements. We have about 14-1/2 inches of ground clearance. The closest point of the bike rack to the rear of our vehicle is about six inches. Weve added about 13 inches to the overall length of our Nissan Frontier. Well pull the pin with the red knob on the backside of our carrier and allow it to tilt away from the vehicle. more

Watch Video

9/5/2013 10:40:01 AM

Yakima DoubleDown Ace 2 Bike Rack Review - 2013 Nissan Frontier- Video

Today, on our 2013 Nissan Frontier, we'll be test-fitting the Yakima DoubleDown Ace 2-Bike Rack, part number Y02450. To begin our test-fit, we'll slide the shank of the bike rack into the receiver tube of the hitch, line up the pin hole, and install the attached pin. We'll tighten the hand-knob at the rear of the shank to engage our anti-rattle device, and secure our bike rack to our vehicle. Now, we'll go over a few clearance measurements. We have about fourteen and a half inches of ground clearance. The closest point of the bike rack to the rear of our Frontier is about six inches. more

Watch Video

9/5/2013 10:38:33 AM

Thule Helium Aero Hitch Bike Rack Review - 2013 Nissan Frontier- Video

Speaker: Today, on our 2013 Nissan Frontier, well be test fitting the Thule Helium Aero two-bike carrier, part number TH9042. Well begin our test fit by sliding the shank of the bike rack into the opening of the hitch allowing the integrated hitch bin to fall into place, and then securing the bike rack to the vehicle by turning the black knob. This will engage the anti-rattle device, securing the Thule Helium to our Frontier. Well now go over a few clearance measurements to see how the two fit together. We have about 20 & inches of ground clearance. Weve added about 19 inches to the overall length of our Frontier. We can now pull the gray lever that at the top of the mast to swing the cradle arms out. With the cradle arms out, weve added about 29 inches to the overall length of our Frontier. To lower it on the tailgate and have access to the truck bed, we can pull the gray lever at the base of the bike rack and tilt the mast down. more

Watch Video

9/4/2013 12:02:46 PM

Thule Apex 4 Hitch Bike Rack Review - 2013 Nissan Frontier- Video

Today on our 2013 Nissan Frontier, we'll be test fitting the Thule Apex, four bike rack, part number th9025. To being our test fit, we'll slide the shank of the carrier into the receiver tube of the hitch, line up the pin hole and install the attached pin. We'll tighten the hand knob at the rear of the shank to engage our anti-rattle device and secure our bike rack to our vehicle. Now, we'll go over a few clearance measurements. We have about 16 inches of ground clearance. The closest point of the carrier to the rear of our vehicle is about one inch. We've added about 12 1/2 inches to the overall length of our Frontier. more

Watch Video

9/4/2013 11:57:06 AM

Swagman Titan Hitch Bike Rack Review - 2013 Nissan Frontier- Video

more

Watch Video

9/4/2013 11:56:09 AM

Thule Vertex 4 Hitch Bike Rack Review - 2013 Nissan Frontier- Video

Today on our 2013 Nissan Frontier, we'll be test fitting the Thule Vertex 4 Bike Rack, part number TH9029. To being our test fit, we'll slide the shank of the bike rack into the receiver tube of the hitch. Line up the pinhole, and thread in our anti-rattle bolt,tightening it with a wrench. Now we'll go over a few clearance measurements. We have about 15 1/2" of ground clearance.The closest point of the bike rack to the rear of our Frontier is about 3". We've added about 13" to the overall length of our Nissan.We'll pull the lever at the base of the carrier and allow it to tilt away from the back of our truck. more

Watch Video

9/4/2013 8:47:12 AM

  3     4