Best 2008 Volvo XC90 Trailer Hitch Options- Video
Speaker 1: Today we're going to be taking a look at the best hitches available for the 2008 Volvo XC90.Now, both the hitches that we're going to be comparing today are going to be Class 3 rated hitches, so that means they're going to have the 2" by 2" receiver tube opening. From Curt, we have part number 13559, and from Draw-Tite, part number 75152. Now, both of these hitches are designed to fit in behind the rear fascia, so what we're going to be left with hanging down is just going to be the receiver tube opening and our safety chain connection points.The receiver tube openings are slightly different. You'll see the Curt's going to have the flush style reinforcement collar, where the Draw-Tite's, it's going to be a little bit more rounded. Also, the safety chain connection points are different. You can see on our Draw-Tite, we've got the rolled steel style safety chain connection point, with plenty of room to get whatever size chain connected we might want to, whereas when we look at the Curt, you can see it's more of a vertical plate that comes down. more
5/8/2018 2:52:10 PM
Trailer Hitch Installation - 2008 Volvo XC90 - Hidden Hitch- Video
Today, on this 2008 Volvo XC90, we're going to review and install this hidden hitch, class 3, 2 inch receiver hitch, part number 87810. All right, this is what the hitch looks like once installed on our XC90. All you can really see is just the receiver opening itself, which is pretty nice because all of the body of the hitch is actually hidden behind the bumper. This will be your 2 inch opening right here, which has a nice rounded collar for reinforcement on the hitch. If we take a look at the side of the hitch here, you'll notice two hitch pin holes. All of your accessories and your ball mounts will use the 5/8's on an inch hitch pin hole right here. This secondary hole here is designed for a J-pin stabilization pin. more
5/4/2016 2:56:06 PM
Trailer Hitch Installation - 2008 Volvo XC90 - Draw-Tite- Video
Today we're going to review and install the Draw-Tite Max-Frame 2" Class III Receiver Hitch, part number 75152. This is what the hitch looks like once installed on our XC90. All you can really see is the receiver opening itself, which is pretty nice because all the body of the hitch is actually hidden behind the bumper. This'll be your 2" opening right here, which has a nice rounded collar for reinforcement on the hitch. If we take a look at the side of the hitch here, you'll notice 2 hitch pin holes. All your accessories and your ball inaudible 00:00:31 will use the 5/8" hitch pin hole right here. This secondary hole here is designed for a J-Pin Stabilization Pin. This will work great with accessories that you put in your hitch that do not have their own anti-rattle device. more
5/4/2016 2:51:06 PM
