Best 2013 Volkswagen Jetta Hitch Options- Video
Today on our 2013 Volkswagen Jetta we'll be looking at our best hitch options. On the top we have a CURT class one, part number C11072. On the bottom we have a Draw-Tite class one, part number 24866. Now the main difference between our two hitches here today is the construction. Our CURT hitch has a round tubular construction, which is more aesthetically pleasing in my mind, whereas our Draw-Tite is a rectangular construction. Then there's our safety chain attachment points. more
12/2/2016 12:56:53 PM
Trailer Hitch Installation - 2013 Volkswagen Jetta - Curt- Video
Today on our 2013 Volkswagen Jetta, we're going to take a look at and show you how to install the Curt Custom-Fit Class I Trailer Hitch Receiver. This offers the 1-1/4" opening. It's part number is C11072. Now, this is what our hitch is going to look like once we get it installed, nice, clean-looking round tube. It's a little less symmetrical than what you see on some. It's a little bit longer on this side than it is on this side but serves a great purpose. It's going to allow us to haul those 2-bike racks. more
9/10/2015 2:33:36 PM
Trailer Hitch Installation - 2013 Volkswagen Jetta - Draw-Tite- Video
Today on our 2013 Volkswagen Jetta, we'll be be installing a Draw Tite hitch, part number 24866. Now, here's what our hitch looks like installed on a vehicle. Now, we'll go ahead and give you a couple of measurements in helping you choose some accessories for your hitch such as a bicycle rack or cargo carrier. From the center of the hitch pan hole to the outermost edge of the bumper is approximately 4 inches, and from the ground to the top of the opening in the receiver is approximately 10-3/4 inches. Now, let's go ahead and install our hitch and we've already gone ahead and removed all the contents of the trunk, the trunk covering, as well as the spare tire cover, as well as the spare tire itself. Now, we're going to go ahead and go underneath the vehicle as we'll need to remove a piece of plastic fascia from underneath the passenger side of the vehicle. To do this, we'll go ahead and remove two torques head screws, as well as two plastic hex nuts. more
12/23/2014 10:14:14 AM
