bing tracking image

2013 Kia Sorento Trailer Hitch Installation And Review Videos

     

Best 2013 Kia Sorento Trailer Hitch Options- Video

Best 2013 Kia Sorento Trailer Hitch Options

Shane: Hi, I'm Shane with etrailer.com. Today we're going to be taking a look at the best hitch options for your 2013 Kia Sorento. Here we have the top three hitches for the Kia Sorento. Here on top we're going to have the Draw-Tite Class 3. Here in the center we're going to have the Draw-Tite Class 2. Here on the bottom we're going to have the CURT Class 3.One of the noticeable differences you're going to see is, with our CURT, it's going to be shaped a little bit different. more


Watch Video

5/31/2019 2:12:42 PM



Trailer Hitch Installation - 2013 Kia Sorento - Draw-Tite- Video

Trailer Hitch Installation - 2013 Kia Sorento - Draw-Tite

Today on our 2013 Kia Sorento, we're going to be taking a look at and showing you how to install the Draw-Tite Max Spring trailer hitch receiver, class three. Part number 75684. Here's what it's going to look like once it's installed. You can see it's got a nice black powder coating finish. Our receiver tube is going to tuck up nicely under the back of the vehicle. We are going to have a little bit of protrusion out of the bottom here with this rectangular tube on the bottom as it goes across as it drops down below our exhaust on this side so you're going to see a little bit more of it on this side. Going to be a complete bolt on design using factory weld nuts with the hardware that's supplied. more


Watch Video

8/18/2016 9:43:04 AM



Trailer Hitch Installation - 2013 Kia Sorento - Curt- Video

Trailer Hitch Installation - 2013 Kia Sorento - Curt

Today on our 2013 Kia Sorrento we'll be installing the Curt Trailer Hitch Receiver in a Class 3 with a 2 inch opening on the receiver. Part number C13073. Here's what our hitch looks installed on our vehicle. Now we'll go ahead and give you a couple measurements in helping you choose some accessories for your hitch, such as a ball mount, a bicycle rack, or a cargo carrier. From the center of the hitch pin hole to the outermost edge of the bumper is approximately 5 inches. From the top of the opening inthe receiver to the ground is approximately 13 and 3 quarter inches. Now let's go ahead and install our hitch. Now to begin with we're going to need to lower down the spare tire and get it out of the way. more


Watch Video

12/4/2013 4:33:27 PM



  1