Draw-Tite Trailer Hitch installation - 2010 Ford Escape- Video
Today on our 2010 Ford Escape, we'll be taking a look at and showing you how to install the Draw-Tite Trailer Hitch Receiver.This is what our hitch looks like. It's going to be a 2" x 2" hitch receiver. You're going to be able to tow those bike racks, cargo carrier, or even put a ball mount in it. So, here you'll our hitch pinhole, and you're going to want to use the one closest to the vehicle, and just show you quick. Slide your pin in there and put your clip on. This pin is not included, but we have plenty here at etrailer.com that you can pick up.This hole here's going to be for your J-pin. more
4/4/2019 9:32:19 AM
Best 2010 Ford Escape Hitch Options- Video
Today we're going to be taking a look at the best hitch options for your 2010 Ford Escape. First, we've got the CURT class 3 receiver hitch, part number 13650. Then we've got the Draw-Tite class 3 receiver hitch, part number 75751. CURT also has class 3 hitch, part number C13651, that's not on the rack. It's going to look exactly the same and give us the same features. The only difference is you're only able to use it on Escapes that come with the factory 1-1/4" hitch. The biggest difference that we're going to see between these two hitches is that the Draw-Tite is going to have higher weight capacities than the CURT. more
1/11/2017 3:34:16 PM
Trailer Hitch Installation - 2010 Ford Escape - Curt- Video
Today on our 2010 Ford Escape, we'll be installing the CURT hitch, part number C12060. This is what a hitch will look like once it's installed. Next we're going to give you a couple measurements to assist you in selecting accessories for your new hitch. From the center of the hitch fit hole to the outermost edge of the bumper, is 2 inches. From the top of the receiver tube opening to the ground, is 16 1/4 inches. This will assist you in selecting accessories such as a ball mount, bike rack, or cargo carrier. Now we'll go ahead with the installation. To begin our install, we'll first go ahead and point out our attachment points. more
7/22/2014 8:16:43 AM
Trailer Hitch Installation - 2010 Ford Escape - Hidden Hitch- Video
Alright today, in this 2010 Ford Escape, were going to install part number 87626 from Hidden Hitch. This is what the hitch looks like when its installed on a vehicle. Next, well give you some measurements to help you out in selecting some accessories, such as a ball mount, a bicycle rack or a cargo carrier. From the top of the receiver opening down to the ground will be around 17 inches. From the center of the hitch pen hole to the edge of the bumper will be around one inch. Now, well go ahead and show you how the hitch is installed. more
4/22/2013 9:57:20 AM
Trailer Hitch Installation - 2010 Ford Escape - Draw-Tite- Video
All right, today is 2010 Ford Escape. We're going to install part number 36501 from Draw-Tite. All right, this is what the hitch looks like once installed on a vehicle. Next, we'll give you some measurements to help you out in selecting some accessories, such as a bicycle rack or a cargo carrier. From top of receiver opening down to the ground, will be about 17 1/2 inches. From the center of the hitch pin hole to edge of bumper will be around 1 inch. more
4/19/2013 10:56:42 AM
Trailer Hitch Installation - 2010 Ford Escape- Video
Today on this 2010 Ford Escape we are going to be installing Curt hitch part number 13650. Before we get started with the installation of the trailer hitch we are going to show you a couple of the final installed dimensions which will help make choosing your hitch accessories a little bit easier. From the top of the receiver tube opening to the ground is going to measure 16 inches and from the center of the pin hole to clear the rear edge of the bumper is going to be approximately one inch. 00:22 more
12/4/2010 2:55:06 PM
