Trailer Hitch Installation - 2007 Chevrolet Uplander - Hidden Hitch- Video
Today on our 2007 Chevrolet Uplander were going to be installing the Hidden Hitch Trailer Hitch Receiver, part number 87410. Now this hitch does have a class three rating and does have a 2 inch hitch opening. Now heres what our hitch looks like installed on our vehicle. Now well go ahead and give you a couple measurements in helping you choose some accessories for your hitch such as a ball mount, a bicycle rack or a cargo carrier. From the center of the hitch pin hole to the outermost edge of the bumper is approximately 5 inches. From the top of the opening in the receiver to the ground is approximately 14 inches. Now lets go ahead and install our hitch. Now before we begin our installation were going to go ahead and point out the attachment points to secure the hitch to the vehicle. Now lets go ahead and begin over here on the drivers side. more
12/29/2014 12:05:37 PM
Trailer Hitch Installation - 2007 Chevrolet Uplander - Curt- Video
Today on our 2007 Chevrolet Uplander, we're going to be installing the Curt trailer hitch receiver, part number 13336. We're going to go ahead and begin here underneath the vehicle. We're going to need to remove a few bolts in order to install our hitch. Over here on the passenger side, there will be a total of three bolts that we'll need to remove as well as loosen up one additional bolt. Now, you notice that two of the bolts actually hold the exhaust hangar in place and the other bolt that we'll need to completely remove is holding the support bracket in place. The outer bolt that holds the support bracket in place, we're just going to loosen up. Now, we'll move over here to the driver side where we'll need to remove one of the bolts that holds the support bracket in place. more
12/9/2014 11:32:01 AM
