Best 2013 Chevrolet Spark Trailer Hitch Options- Video
Speaker 1: Today, we're going to show you the best hitch options available for your 2013 Chevrolet Spark. First up, we have our hitch from Curt and one from Draw-Tite. Let's go ahead and take a look at the differences first. First off, we'll take a look at the structure differences, which would be on the very end here. We've got a nice collar around the opening of our receiver here on our Curt. And then our Draw-Tite does not have that collar around it.Next, we'll go ahead and look at the length of the receiver tube here. more
10/10/2017 9:27:47 AM
Trailer Hitch Installation - 2013 Chevrolet Spark - Curt- Video
Today on our 2013 Chevrolet Spark, we're going to install part number C11334 from Curt. This is our class 1 inch and a quarter Receiver Hitch. Now this is what the hitch looks like once installed on the Spark. Next, we'll go ahead and give you some measurements to help you out in selecting some accessories such as the bicycle rack or a cargo carrier. From top of the receiver opening down to the ground, will be about 11 and a half inches. From the center of the hitch pin hole to the outside edge of the bumper, comes out to about 4 and a half inches. Now we'll go ahead and show you how the hitch is installed. Now our first step to get our car ready is we need to enlarge hole at the very end of the frame. more
12/18/2014 12:13:22 PM
Trailer Hitch Installation - 2013 Chevrolet Spark - Draw-Tite- Video
Today it is 2013 Chevrolet Spark. We're going to install part number 24893 from Draw-Tite, a class one 1-1/4" receiver hitch. This is what the hitch looks like when it's installed on our Spark. Next, we'll go ahead and give you some measurements to help you in selecting accessories, such as bicycle rack or a cargo carrier. From the top of the receiver opening down to the ground will be about 11-1/2". From the center of the hitch pin hold to the outside of the bumper will be about 6-1/8". Now we'll go ahead and show you how the hitch is installed. First step to get our car ready is we need to enlarge a hole at the very end of the frame. more
12/18/2014 12:09:48 PM
