Trailer Hitch Installation - 1994 Chevrolet Lumina- Video
Today we're working on a 1994 Chevy Lumina. We're going to install a Draw-Tite hitch, part number 36124. Here are a couple hitch measurements that will assist you in selecting accessories for your new hitch. From the center of the hitch pin hole to the outermost part of the bumper is 9 and 1/4 inches. From the top of the receiver tube to the ground is 11 and 1/4 inches. We're going to need to lower the exhaust, but before we do that, we're going to put a safety strap underneath just so we can control how far the exhaust will fall. To remove the hardware from the muffler, we're going to remove the bolt that goes through the rubber insulator. With that bolt removed, I'm now going to go ahead and remove two of the rubber hangers on the exhaust pipe. To remove them, first we're going to spray them down with some spray lubricant. more
1/11/2012 3:20:58 PM
