bing tracking image

2008 Nissan Frontier Trailer Hitch Installation And Review Videos

     

Best 2008 Nissan Frontier Trailer Hitch Options- Video

Best 2008 Nissan Frontier Trailer Hitch Options

Speaker 1: Today we're going to be taking a look at the best hitch options for your 2008 Nissan Frontier. Up top here we're going to have our Draw-Tite Class 3 hitch. Then right below that we're going to have our etrailer Class 3 hitch. Then finally, below that we're going to have our CURT Class 3 hitch.If I was looking for a hitch for my Frontier, I would probably go with the Draw-Tite for a few different reasons. It is going to have an increased tongue weight, which is going to be nice for a few different accessories we might want, or just to have your trailer, as well as some minor differences that it'll have over the two etrailer and the CURT. Let's take a closer look at all the differences between them.Our Draw-Tite is going to have the highest tongue weight at 750 pounds, and a gross trailer weight rating of 5,000 pounds. more


Watch Video

10/30/2018 10:12:45 AM



Trailer Hitch Installation - 2008 Nissan Frontier - Draw-Tite- Video

Trailer Hitch Installation - 2008 Nissan Frontier - Draw-Tite

Today on our 2008 Nissan Frontier, we'll be installing the Draw-Tight Hitch, part number 75282. This is what our hitch will look like once it's installed. Next, we'll go ahead and give you a couple of measurements to assist you with selecting accessories for your new hitch. From the center of the hitch pinhole to the outermost edge of the bumper is 3-1/2 inches. From the top of the receiver tube to the ground is 15-1/2 inches. This will assist you in selecting accessories such as a drawbar, a bike rack, or a cargo carrier. more


Watch Video

11/21/2012 9:19:27 AM



Trailer Hitch Installation - 2008 Nissan Frontier - Curt- Video

Trailer Hitch Installation - 2008 Nissan Frontier - Curt

Today on our 2008 Nissan Frontier well be installing the Curt Hitch part number 13241. This is what our hitch will look like once its installed. Next well go ahead and give you a couple of measurements to assist you with selecting accessories for your new hitch. From the center of the hitch pin hole to the outer most edge of the bumper is 3-1/2 inches. From the top of the receiver tube to the ground is 16-1/4 inches. This will assist you with selecting accessories such as a drawbar, a bike rack or a cargo carrier. more


Watch Video

11/21/2012 9:19:22 AM



  1