Trailer Hitch Installation - 2004 Buick Rendezvous - Draw-Tite- Video
All right, today on this 2004 Buick Rendezvous, were going to install part number 75430 from Draw-Tite. All right, this is what the hitch looks like when its installed on the vehicle. Next well give you some measurements thatll help out in selecting some accessories such as a ball mount, a bicycle rack or a cargo carrier. From the top of the receiver opening down the ground will be about 13-1/4 inches. From the center of the hitch pinhole to the edge of the bumper will be about 5-1/2 inches. Now Ill go ahead and show you how the hitch is installed. Before we install the hardware, well show how it looks on the hitch. Youll see you have the bolt and blocks will be inside the frame and then go through the hitch and on the bottom of the hitch, youll have the conical tooth washers and nuts. more
1/28/2013 1:48:32 AM
Trailer Hitch Installation - 2004 Buick Rendezvous- Video
Today on this 2004 Buick Rendezvous we will be installing Draw-Tite hitch part number 36425. This installation will also apply for Hidden Hitch part number 90158. We are underneath the vehicle near the bumper, we are looking at the driver side frame rail. As you can see we have two large oblong holes at the end of the frame rail and we are going to be using both of those as attaching points for our trailer hitch. We will be placing carriage bolts and blocks up inside the frame and pulling it back down into position for both of those locations. That is going to be the same on the passenger side as well. If you notice further rearward we have this lip that is attaching the body to the bumper. We are going to be drilling four holes, two per side, to attach the trailer hitch to as well. What we want to do first is put the hardware into the frame, get the hitch up into position, and we will use the hitch as a template to drill those holes out. 00:47 more
3/29/2010 5:40:57 AM
