Best 2012 Chevrolet Impala Trailer Hitch Options- Video
Rob: Rob here at etrailer.com, and today we're going to be taking a look at the best hitch options for your 2000 through 2013 Chevrolet Impala. Up top here, we're going to have our CURT, which is going to be a Class 2. Then right below that, we're going to have our Draw-Tite, which is also going to be a Class 2.If I we're looking for a hitch for my Impala, I would go with the Draw-Tite, but let's take a closer look at both of our hitches. Now the first thing you might notice is that both of our hitches are going to look very similar and have a very similar design. That's partially because they're going to install exactly the same way. They're going to use factory mounting locations and we're not going to have to drill or cut anything, but we are going to have to fish wire some hardware in place and lower our exhaust.One of the only differences that you're really going to notice is going to be the collar on the end of the receiver tube. more
3/28/2019 7:07:42 PM
Trailer Hitch Installation - 2012 Chevrolet Impala - Hidden Hitch- Video
Today in our 2012 Chevy Impala, we're going to install hidden hitch part number 90137. Here are a couple of measurements that will assist you in selecting accessories for your hidden hitch. From the center of the hitch pin hole to the outermost part of the bumper is 6-1/2 inches. From the top of the receiver tube to the ground is 12-1/2 inches. Now let's go ahead with the installation. First we're going to need to lower the exhaust but before I do that I'm going to put a safety strap under so that it doesn't fall too far and damage any of the exhaust. more
3/22/2012 9:36:17 AM
Trailer Hitch Installation - 2012 Chevrolet Impala - Draw-Tite- Video
Today on our 2012 Chevrolet Impala, were going to install Draw Tite Hitch part number 36407. Here are a couple of measurements that will assist you with selecting accessories for your new hitch. From the center of our hitch pin hole to the outermost point of the bumper is 6-1/2 inches. From the top of receiver tube to the ground is 12-1/2 inches. Now lets go ahead with the installation. First, were going to need to lower the exhaust, but before I do that, I want to put a safety strap under so it doesnt fall too far and damage any of the exhausts. more
3/22/2012 9:14:02 AM
Trailer Hitch Installation - 2012 Chevrolet Impala - Curt- Video
Today in our 2012 Chevrolet Impala, we're going to install a car hitch part number 12252. Here are a couple of measurements that will assist you selecting accessories for your new hitch. From the center of the hitch pin hole to the outer most point of the bumper is 6-1/2 inches. From the top of the receiver tube to the ground is 12-3/4 inches. Now let's go ahead with the installation. Fist we're going to need to lower the exhaust. more
3/20/2012 8:49:53 AM
