Best 2012 Jeep Grand Cherokee Trailer Hitch Options- Video
Hello, neighbors. It's Brad here at etrailer. And today, we're taking a look at the best trailer hitch options for a 2012 Jeep Grand Cherokee. Now, there's plenty of options available here at etrailer, as far as your trailer hitch for your Jeep Grand Cherokee, but I've gone ahead and selected three of them which I think are great choices, or at least my personal favorites. And they all offer a little bit different from one to the next. So up top, we have our Draw-Tite. more
9/8/2022 12:58:03 PM
Trailer Hitch Installation - 2012 Jeep Grand Cherokee - Draw-Tite- Video
Today on our 2012 Jeep Grand Cherokee we're going to be taking a look at and also showing you how to install the Draw-Tite custom fit class three trailer hitch receiver. Part number on it is 75699. Here's what our hitch looks like installed. As you can see, our crosstube's completely hidden here. It gives us a really nice clean look on the back of the Cherokee. Beefs it up maybe just a little bit in the looks department here. more
8/24/2016 11:01:38 AM
Trailer Hitch Installation - 2012 Jeep Grand Cherokee- Video
Today on our 2012 Jeep Grand Cherokee, we'll be installing the Curt Class 3 2 inch receiver tube hitch, part number C13182. First we'll go ahead and point out the attachment points. The 4 attachment points will be the manufacturer's hardware here on the side of the frame, 2 on each side. We'll be removing the manufacturer's bolts, putting our hitch in place, and then reinstalling the manufacturer's hardware. Let's go ahead and remove the bolts now. We'll now go ahead and put our hitch in place. more
9/19/2014 3:01:16 PM
Trailer Hitch Installation - 2012 Jeep Grand Cherokee - Curt- Video
Today on this 2012 Jeep Grand Cherokee were going to install the Curt hitch part #: c13065. Here are a couple of measurements that will assist you in selecting accessories for your new hitch. From the center of the hitch pinhole to the outermost point of the bumper is 4 and a quarter inches. From the top of the receiver tube to the ground will be 15 and inches. Now lets go ahead with the installation. Alright, before we can install the hitch we need to remove the four frame bolts located inside the frame, theres two on each side. more
3/12/2012 12:57:09 PM
