2013 Toyota Sienna Roof Rack Installation And Review Videos

Thule Crossroad Roof Rack Installation - 2013 Toyota Sienna- Video

Today on our 2013 Toyota Sienna, we'll be test fitting the Thule complete crossroad kit with 58 inch long bars and locks, part number TH45058. We'll begin our test fit by placing the front load bar onto the front of our roof. We'll position both of the feet next to a crease, right where the raised side rail connects to the roof. Make sure the feet are equidistant from the slide on both sides. This will ensure that the front bar is perpendicular to the raised rails of our roof. With the bar in position, we can bring the rubber coated steel straps around the underside of the bar and hook them into the connection points. We'll then use the included tool to tighten on the black bolt that tighten the straps up against the rail. We'll then repeat the same process for the other side. With this done, we'll go ahead and place the rear load bar onto the rear of our roof and measure the load bar spread. more

10/28/2013 2:15:46 PM

Thule AeroBlade Traverse Roof Rack Installation - 2013 Toyota Sienna- Video

Today on our 2013 Toyota Sienna, we'll be test fitting the Thule AeroBlade roof rack system using part numbers THARB53 for the 53" AeroBlade bars, and part number TH450R for the Thule Rapid Crossroad roof-mounted railing foot packs. With our roof rack assembled according to the instructions, we'll begin the test fit by placing our front load bar onto the front part of our roof. We'll find a fixed point on the side rails to set our foot pack. This way we can make sure that our foot packs are in line with each other on each side of the vehicle. Once we have the bar in place, we need to check for even bar overhang on each side of our vehicle. Once we have it set, we can bring our strap around our side rail, place it back into the foot pack, and tighten with the included tool. more

8/15/2013 4:10:43 PM