Best 2011 Acura MDX Trailer Wiring Options- Video
Speaker 1: Today we're going to be taking a look at the best wiring options for our 2011 Acura MDX. Our best two options are going to come from CURT and Tekonsha. They're both going to be similar in their functions, but there are going to be some differences in them that might make one a little bit better suited for your needs.At first glance you'll notice that this one here by CURT does have a fuse, so this one will be fuse-protected, where our Tekonsha's not. It'll just have the internal module protection. The CURT also has internal module protection, but having that extra fuse is kind of nice just in case you do have a short that the module doesn't catch. It won't cause any damage to the component. more
10/29/2018 1:32:53 PM
Trailer Wiring Harness Installation - 2011 Acura MDX 118424- Video
Today, on our 2011 acura mdx, we're going to be installing the draw type T1 vehicle wiring harness, with full pull 00:00:07 flat trailer connector. Part number 118424. We're going to 1st begin here by raising the rear hatch of the vehicle. Next we'll go ahead and lift this cover here, set it up out of the way. We'll then go ahead and remove the jack here, so we got to take the cover out 1st. Next, we'll need to go ahead and remove the rear threshold here at the rear of the vehicle. You simply lift up gently, we've got to pull out from the tabs. more
9/19/2017 2:48:27 PM
Hopkins Plug-In Simple Vehicle Wiring Harness Installation - 2011 Acura MDX- Video
Speaker 1: Today on our 2011 Acura MDX we're going to be taking a look at and showing you how to install the Hopkins Plug-In Simple Vehicle Wiring Harness with 4-Pole Flat Trailer Connector. Part number HM11143275. This is what our wiring looks like when it's installed. You can see it's going to live inside of the vehicle. It's going to come with a dust cap. It's going to cover all your connections from the elements. more
9/13/2017 1:48:41 PM
Trailer Wiring Harness Installation - 2011 Acura MDX- Video
Today, on our 2011 Acura MBX we'll be installing the Curt T-connector vehicle wiring harness with 4-pole flat trailer connector, part number C56038. We'll go ahead and begin here at the rear of the vehicle. We'll raise the rear hatch up. We need to remove this little access door right here on the driver side. Right there is the location that we'll be plugging our wiring harness into. Next, we're going to go ahead and lift this cover here off in the rear cargo area. We'll then go ahead and pull up our rear threshold piece and set that aside as well. Next, we're going to go ahead and attach our 2-sided tape here to the back side of our converter box. Next. We're going to go ahead and take our plug here and go ahead and set the door off here and make things a little easier. more
9/2/2014 3:19:15 PM
