Trailer Hitch Installation - 2003 Ford F-350 - Curt- Video
Today on our 2003 Ford F-250 super duty we're going to take a look at and show you how to install the Curt Custom Fit Class 4 Trailer Hitch Receiver. This offers the two inch opening, it's part number is C14355. Here you can see our hitch installed in the vehicle. Really clean look, just a little bit of a step down, beefs up the rear end of the truck a little bit, at least in the looks of it. It's a really nice heavy duty hitch. This being a class four is going to give you a 1,000 pound tunge weight capacity, 10,000 pound gross trailer weight capacity. more
6/5/2015 9:52:25 AM
Trailer Hitch Installation - 2003 Ford F-350 - Curt C15410- Video
Today on our 2003 Ford F350, well be installing the Curt hitch, part number c15410. Next well go ahead and give you a couple of measurements to assist you with selecting accessories for your new hitch. From the center of the hitch pin hole to the outer most edge of the bumper is three inches, to the top of the inside of the receiver tube opening to the ground is 16-3/4. This will assist you with selecting accessories such as a ball mount, a bike rack, or a cargo carrier. Now lets go ahead with installation. Note for this application is recommended to lower and remove the spare tire for the ease installation of installing the hitch, however; unfortunately we cannot lower the spare tire as we installed this hitch.First well go ahead and identify our attachment points, there are a total of eight attachment points, four on each frame rail, these are predrilled holes in the frame rail by the manufacture. more
3/14/2013 7:36:47 AM
