Best 2015 Cadillac SRX Hitch Options- Video
Today we're going to be taking a look at the best hitch options for your 2015 Cadillac SRX. We're going to start with our top hitch here. This is going to be the CURT class three, part number C13002. Then our second hitch is going to be the CURT class two hitch, part number C12070, followed by the last one here. Going to be our Draw-Tite class three, part number 75682. Now our first major difference in our hitch is going to be this CURT here. This is going to be a class two hitch, where the other ones are going to be class threes. more
6/29/2016 12:29:57 PM
Trailer Hitch Installation - 2015 Cadillac SRX - Curt- Video
Today on our 2015 Cadillac SRX we're going to take a look at and show you how to install the Curt Custom Fit Class III trailer hitch receiver. This offers the 2 inch opening, it's part number is C13002. Now here's what the hitch is going to look like installed. As you can see, we've got a nice clean look. Just remove that center cover there and that's all it will really have exposed of our hitch. This is going to have the 2 inch by 2 inch opening, so it's going to work out great with a lot of different accessories. It's got a 5/8 pin hole diameter. more
8/20/2015 4:07:23 PM
Trailer Hitch Installation - 2015 Cadillac SRX - Draw-Tite- Video
Today on our 2015 Cadillac SRX, we're going to take a look at and show you how to install the Draw-Tite Max-Frame trailer hitch receiver. This is a custom fit class three receiver with a two-inch opening. Part number is 75682. Here's what our hitch is going to look like when installed. Most all of it's hidden behind our rear fascia here so we're not going to see a whole lot. It's got the little section here. It gives us our two-inch by two-inch receiver tube opening. more
8/20/2015 4:06:43 PM
Trailer Hitch Installation - 2015 Cadillac SRX - Curt C12070- Video
Today on our 2015 Cadillac SRX, we're going to review and install the Curt Class 2 1-1/4-inch receiver tube hitch, part number C12070. Now here's what our hitch will look like once it's installed. As you can see, it's got the sturdy square tube design and a fully-welded construction. It's got a really nice black powder-coated finish so it blends in well with the underbody of the vehicle, and it'll resist rust and corrosion. On the either side of our receiver tube is our chain hold-down, and going all the way through the receiver tube is our 1/2-inch pin hole. This is our class 2 1-1/4-inch by 1-1/4-inch receiver tube, and it's capable of up to 350 pounds of tongue weight and a 3,500-pound tow capacity. Next, we'll go ahead and give you a couple measurements to assist you with selecting accessories for your new hitch. more
6/24/2015 2:26:54 PM
