bing tracking image

2015 Ford F-150 Trailer Hitch Installation And Review Videos

     

Trailer Hitch Installation - 2015 Ford F-150 - Curt- Video

Trailer Hitch Installation - 2015 Ford F-150 - Curt

Today on a 2015 Ford F-150, we're going to review and install the Curt Class 4 Receiver Hitch, Part #C14016. All right, now this is what a hitch looks like once installed on our F-150 here. You'll notice right off the bat, this does sit lower quite a bit from the bumper; probably about 5" or so. However, this is designed to work with a factory hitch so your factory hitch would be right here. If your factory hitch is going to be not adequate for your needs, then you can stack this Curt heavier duty hitch right on the bottom of it Let's go ahead and look at its ratings. In this case, it's going to have a gross trailer weight of 10,000 pounds, which is a pulling weight, and it will have a tongue weight for 1,000 pounds, which is the weight that pushes down on the hitch. Now when you add a weight distribution assembly, you gain in weight and tongue weight so can get a 12,000 pound pulling capacity and also 1,200 pound tongue weight, when you add a weight distribution assembly. Let's go ahead and look at the fit and finish of our hitch. more


Watch Video

1/25/2017 11:57:21 AM



Trailer Hitch Installation - 2015 Ford F-150 - Draw-Tite- Video

Trailer Hitch Installation - 2015 Ford F-150 - Draw-Tite

Today, on our 2015 Ford F150, we'll be installing the Draw-Tite Max-Frame Class 3 Trailer Hitch Receiver, part number 75938. Here's what our hitch looks like installed. As you can see, it's tucked up nicely underneath our bumper. It's not hanging down an excessive amount. It's right, basically, almost flush with the bottom of the bumper. We have a nice, round, tubular construction on our frame, which angles back towards the frame of our truck. more


Watch Video

9/26/2016 12:30:38 PM



Trailer Hitch Installation - 2015 Ford F-150 - Curt C13118- Video

Trailer Hitch Installation - 2015 Ford F-150 - Curt C13118

Today on our 2015 Ford F150 we're going to take a look at and show you how to install the CURT custom fit class three trailer hitch receiver. This offers the 2" by 2" opening. Its part number is C13118. Here's what our hitch looks like installed on the truck. As you can see, we've got the nice 2" by 2" opening. It's a class three hitch so it's going to give us a lot of versatility, whether it's a cargo carrier, or bike rack, or even a ball mount if wee're doing some towing. more


Watch Video

11/5/2015 2:42:08 PM



  1