2013 Toyota Tacoma Roof Rack Installation And Review Videos

Yakima Q Tower Roof Rack Installation - 2013 Toyota Tacoma- Video

Today on our 2013 Toyota Tacoma, were going to be test fitting the Yakima Q Towers roof rack system using the 66-inch round bars. Well use part numbers Y00410, Y00727, Y00728 and Y00124. With our roof rack assemble according to the manufacturers instructions, well begin our test fit by opening the front doors of our Tacoma, grabbing the front half of our roof rack and placing it onto the roof line of our vehicle. Per the Yakima fit guide, well measure from the rear edge of the windshield to the leading edge of our foot pack, 6 inches. Well take this measurement on both sides to be sure that we have our feet in line with each other. Once we have our measurements done on both sides, well cam down the large black levers to secure the rack to the roof line of our car. With the front secure, well close our front doors, open our rear doors, grab the rear half of our rack and again place it onto the roof line of our vehicle. more

7/28/2014 12:37:24 PM

Yakima Q Tower Roof Rack Installation - 2013 Toyota Tacoma Y00124- Video

Today on our 2013 Toyota Tacoma, we're going to be test fitting the Yakima Q Towers Roof Rack System, using the 58" round bars. We'll use part numbers Y00409, Y00727, Y00728, and Y00124. With our rack assembled according to the manufacturer's instructions, we'll begin our test fit by opening the front doors of the Tacoma, grabbing the front half of our rack, and placing it onto the roof line of our vehicle. Per Yakima's fit guide, we're going to measure 6" from the back of the windshield to the front edge of our foot pack on both sides. This will ensure that we have our feet in line with each other. We'll then pull down on the black levers on both sides to secure our rack to the roof line of our car. With our front secure, it's now time for the rear. We're going to place it onto the rear part of our roof, then we're going to take a second measurement. more

7/28/2014 12:36:56 PM

Thule Traverse Roof Rack Installation - 2013 Toyota Tacoma- Video

Today on our 2013 Toyota Tacoma we're going to be test fitting the Thule Traverse Roof Rack System, using the fifty eight inch square bars. Part numbers THLB58, TH480, and THKIT1511. With our roof rack assembled according to the manufacture's instructions, we're going to begin by opening front doors on the Tacoma and placing the front half of our roof rack on the front portion of our roof. Per Thule's fit guide, we're going to measure thirteen inches from the rear edge of our windshield to the leading edge of our foot pack. We'll take this measurement on both sides to be sure we have our feet in line with each other. With our measurements done, our feet in line, we'll now tighten each side up a little bit at a time until we have the rack secure to our vehicle. With the front portion of our rack secured, we can now close the black plastic covers, also close our front doors. more

7/25/2014 9:20:59 AM