Draw-Tite Ball Mount Review - 2013 Nissan Xterra- Video
Today on our 2013 Nissan Xterra, we'll be test fitting the Draw-Tite Ball Mount 3 quarter inch Rise or 2 inch Drop rated at 6,000 pounds Part number 2923. To begin our test fit, we'll first need to get the hitch height of our vehicle. This is the measurement from the ground to the inside top edge of the receiver tube. Our measurement is 19 inches. This measurement may vary due to tire size, hitch type or any other aftermarket accessories. We'll go ahead and install out ball mount in the drop position first. more
6/21/2013 3:04:46 PM
Curt Tri-Ball Mount Review - 2013 Nissan Xterra- Video
Today on our 2013 Nissan Xterra well be test fitting the Curt Tri-Ball Mount, part number c45001. Before we begin our test fit, well need to get the hitch height for our vehicle. This is measurement from the ground to the inside top edge of the hitch tube. Our measurement is 19 inches. Well go ahead and slide the shank of our ball mount into the opening of the receiver hitch tube. Well align the pin hole and install our pin putting the clip other side. more
6/21/2013 3:03:55 PM
Curt Multi-Ball Adjustable Ball Mount Review - 2013 Nissan Xterra- Video
Today on our 2013 Nissan Xterra, we're going to be test fitting the Curt Multi-Ball Adjustable Ball Mount for 2 inch Hitches Part number D900. To begin our test fit, we need to go ahead get the hitch height of our vehicle. This is the measurement from the ground to the inside top edge of the receiver tube. The hitch height for this vehicle is about 19 inches. Now, this measurement may be varied due to tire size, hitch type or any other aftermarket accessories. To begin our test fit. more
6/21/2013 3:01:04 PM
