Trailer Brake Controller Installation - 2011 Ford Edge- Video
Today on our 2011 Ford Edge, we're going to be taking a look at in installing the Hopkins InSIGHT Flex-Mount Trailer Brake Controller. Part number HM47297. In conjunction with the universal installation kit for trailer brake controllers, part number ETBC7. We're using part number 18136 which is a long no drill mount bracket. A feature of this one that a lot of other brake controllers don't have is that it has three separate components: the read out, this little control box right here, and then also the brake controller box itself. You can mount these just about wherever you'd like. more
6/29/2016 12:32:39 PM
Trailer Brake Controller Installation - 2011 Ford Edge 90885- Video
Today on 2011 Ford Edge, we're going to be installing the Tekonsha Prodigy P2 trailer brake controller. This controls 1 to 4 axles, and it is proportional. The part number on it is 90885. To do our install, we're also going to be using part number ETBC7. This is going to be the wiring for our brake controller, and part number 18136, which is going to be a no drill bracket mount. Here's what your brake controller is going to look like once you've got it installed onto your Edge. What these allow us to do is fine tune the amount of braking force that our trailer is going to exert as opposed to some of the older styles that used pressure or friction when you stopped or we're trying to back up to apply the brakes. This gives us a manual override here to where we can apply our trailer brakes before we've even hit our vehicle brakes, and as you'll see her, it's fully adjustable up and down to give us the appropriate braking force. more
2/10/2015 3:43:49 PM
