2009 Ford Van Custom Fit Vehicle Wiring Installation And Review Videos

Best 2009 Ford Van Trailer Wiring Options- Video

Speaker 1: Today we're going to be taking a look at the best wiring options for your 2009 Ford Van. We're going to have the Hopkins here, along with the Tekonsha. Both these wiring kits are going to be for our vans that do not have a factory seven-way at the back. If you do have a factory seven-way connector at the back, we do have a few options that'll either replace your broken one or upgrade it.Here we have the Hopkins, which is not only going to give you a seven-way connector, but it's also going to give you a four-pole flat connector, which'll be nice if you have multiple trailers that you tow. It's going to come with a mounting bracket and hardware. That way we can easily mount it at the back of our bumper.Here we have the EZ Connector, which is actually going to use magnets to hold the connector in place so we're not going to have to worry about any broken blades or bent pins. more

6/28/2018 10:57:20 AM

Trailer Wiring Harness Installation - 2009 Ford Van- Video

Today on our 2009 Ford E350 Econoline van, we're going to be taking a look at and installing the Curt T-connector Wiring Harness with Four Pole Flat Trailer Connector. Part number C56020. To test our wiring connection, we'll go ahead and take the ground side and connect that to the ground side of the plug and we'll test our brown wire, which would be our running lights, we'll get a constant signal. We'll test our left turn signal, which would be the yellow wire, we'll get that alternating signal, and the passenger side, or the right turn signal which will be that green wire. Now we'll go ahead and go brake lights, which should give us a constant signal on the green and the yellow. It looks like our wiring checks out, so we'll go ahead and plug it all back up and tuck it back away in the jack stand area. Now that we've seen how the wiring works, let's go ahead and see how it's installed. We'll remove both the driver and passenger side by removing the four T15 torx bit screws located here to secure the tail lights. more

12/14/2015 3:05:46 PM