2006 Ford Van Custom Fit Vehicle Wiring Installation And Review Videos

Trailer Wiring Harness Installation - 2006 Ford Van 18252- Video

Today on our 2006 Ford van we're going to install part number 18252. This is a four pull hard wiring kit with circuit tester. First thing that you do is get our van ready. We need to take off the two tail lights. Starting on the drivers side here, we'll go ahead and remove the bolts. We're using a T 15 torque to take these out. The screws loosened, we'll go ahead and take out the remaining two. We'll just go ahead and leave our drivers side alone fore now. more

12/16/2014 12:12:13 PM

Trailer Wiring Harness Installation - 2006 Ford Van C56020- Video

Today on our 2006 Ford Van well be installing the Curt T-Connector Vehicle Wiring Harness with a 4-pole flat connector part number C56020. To begin our installation well first go ahead and remove both taillights. Each taillight is secured with four screws. Well go ahead and remove the screws and then pop the taillights out of their position. Well go ahead and let them hang there and well come back to that in a minute.Now with both taillights removed well go ahead and open up the rear cargo doors. Here well need to remove the rear threshold. more

5/21/2013 10:46:08 AM

Trailer Wiring Harness Installation - 2006 Ford E-350 Van- Video

Today on this 2006 Ford E350 van were going to install part number C56020 from Curt. The first thing we need to do is go ahead and remove the two taillights. Then well disconnect the taillights from the wire harnesses. Now well go ahead and get inside the van. Well open up the doors and remove the panel for the jack storage compartment. Next well remove the threshold. more

11/1/2012 3:08:04 PM