Curt 5th Wheel/Gooseneck Wiring Harness Installation - 2017 Ford F-250 Super Duty- Video
Clayton: Hello everybody. Clayton here at etrailer.com. Today we're going to be working on a 2017 Ford F-250 that we're going to be taking a look at. And I'll show you how to install the Curt in bed 7-Way for aluminum beds. Now there are a few good reasons that you might want an in bed wiring for your truck in particular. And in our customer's case, they have a gooseneck, so it's going to be a whole lot easier to plug up to our trailer with our wiring in the bed. more
12/10/2020 7:12:20 AM
Ryan: Hey everybody, Ryan here at etrailer. So now on our 2017 Ford F250, we're going to be taking a look at and showing you how to install the Bargman 90 degree, seven-way for fifth wheel and gooseneck trailer hitches. Now this kit is going to be designed for trucks with aluminum beds. Many of the questions we get asked, especially with the aluminum bed Fords, is this kit going to work or potentially damage their truck bed The answer is this kit is going to be specifically designed for aluminum beds, and that's because the screws that actually hold our plug in place are made from aluminum. So we're not going to have to worry about any corrosion issues, or things of that nature as like some of the other plugs that use just your traditional style steel screws. And because of that, the steel screws will eventually corrode and cause a little bit of damage. more
6/9/2020 2:17:08 PM
Bargman Fifth Wheel and Gooseneck Wiring Harness Installation - 2017 Ford F-250 Super Duty- Video
Speaker 1: Today on our 2017 Ford F-250 Super Duty, you're gonna be taking a look at, and I'm gonna show you how to install the Bardhaman Gooseneck 90 Degree Wiring Harness for Aluminum Truck Beds, part number 50-97-410-010.This is gonna allow you to run a plug from your gooseneck or fifth wheel in the back of your vehicle to the bed of your truck without having that wire hang over top of your tailgate and run that to your bumper. Gives it a nice, clean look. Everything stays in the back of the truck.This can provide you with the necessary function you're going to need to pull your gooseneck or fifth wheel. It's gonna have a nice cap, spring-loaded cap that's gonna help keep any moisture from getting into the connections. It's gonna mount to existing wiring on the vehicle or to an existing 7 volt plug you have on the back of your bumper.Because Ford's have aluminum beds, the four self-tapping screws that come in your kit are also gonna be aluminum. It's gonna help prevent corrosion when metal to metal contact is made. more
7/31/2018 2:37:11 PM
