Tekonsha T-One Vehicle Wiring Harness Installation - 2018 Cadillac XT5- Video
Hey everybody, Ryan here at etrailer. Today on our 2018 Cadillac XT5, we're gonna be showing you how to install the Tekonsha four-way flat trailer wiring harness. Before we get into that though, let's just take a couple of minutes, check this out, and make sure it's gonna work for you. If you plan on pulling a trailer around with your Cadillac, you're gonna need a way to power up all the lights on that trailer. That way you're not only safe, but legal as well. And that's exactly where a kit like this is going to come into play. more
8/1/2023 12:25:50 PM
Best 2018 Cadillac XT5 Trailer Wiring Options- Video
Hello neighbors. It's Brad here at etrailer. And today we're taking a look at some trailer wiring options on a 2018 Cadillac XT5. Your first step in determining what the best trailer wiring will be for you is what seeing what kind of options you need as far as a four-pole versus a seven. So, your four-pole is going to be great for your smaller trailers and just your basic connection to get your lights and signals working to let the people know behind you what you're doing. Your seven way is going to be great, If you plan on towing a trailer that has brakes integrated, and that way you can send the braking signal to the actual brakes on the trailer and slow it down. more
10/21/2021 3:18:38 PM
Curt T-Connector Vehicle Wiring Harness Installation - 2018 Cadillac XT5- Video
Speaker 1: Today, on our 2018 Cadillac XT5, we're going to be taking a look at and showing you how to install the Curt T-Connector Vehicle Wiring Harness for Factory Tow Package, with a 4-Pole Flat Trailer Connector. That's going to be part number C56325.So here's what our wiring looks like once it's installed. It's going to provide us the 4-pole flat trailer connector. It's going to give us all the required lights to get down the road safety and securely, such as our running lights, our tail lights and our turn signals.Our wiring is going to be a plug and play installation, we're not going to have to cut or splice into any kind of factory wiring. We're going to have a plug that's going to be just under the bumper here, that's going to plug directly into our harness and provide us all the power and signals that we need. Our turn signals are going to have the 7.5 amp rating each, whereas our tail lights are going to have 7.5 amp total rating.Whenever we're not using it, we can just take our dust cover, slip it through our safety chain connection point, and the wiring will be tucked up by our hitch here, and we can put the cover back in place. more
9/28/2018 3:47:12 PM
