Yakima Roof Rack Review - 2016 Jeep Cherokee Y00147- Video
Speaker 1: Today on our 2016 Jeep Cherokee, we're going to be test fitting the Yakima RoundBar Roof Rack System consisting of part numbers Y00408. These are the round crossbars 48" long. We'll also be using part number Y03536, which is the RoundBar SL Adapter for the Yakima Bars, and finally part number Y00147. These are the TimberLine Towers for the Yakima Crossbars, particularly for the factory raised side rails.The Yakima RoundBar Roof Rack System is an economical choice for your Jeep Cherokee, has a strong sturdy surface with the bars where you can set your bike racks, your cargo baskets, or your cargo boxes onto. This is a very simple roof rack system to install. The towers here simply wrap around your existing factory raised side rails providing padding where it will make contact so it won't scratch them up or anything like that, and they tighten down and they're ready to go. more
9/5/2018 11:57:13 AM
Roadmaster Battery Charge Line Kit Installation - 2016 Jeep Cherokee- Video
Today on our 2016 Jeep Cherokee we'll be installing the Roadmaster battery charge line kit for towed vehicles, part number RM-156-25. To begin our installation we'll be at the front of our vehicle where our six pole round connector is. That's the umbilical between our towed vehicle, our Cherokee here today, and our RV. I'll remove this real quick so you have access to all the wiring. We'll just pull it down here. We'll be using the middle terminal right here because on a seven to six wire cable the middle terminal on the plug is the charge line coming from the RV. We'll take our red wire that comes with our charge line kit, strip off some insulation, and then we want to loosen the set screw for our middle terminal here, stick our wire down inside there, and tighten the screw back up. With that secure I'll pull back on it and make sure it's really secure, take the other end of our red wire and we'll slide it through our sleeve here, reinstall the sleeve over it. One thing I like to do is put our wire inside some wire loom. more
12/15/2016 11:43:12 AM
