Dodge Hitch Cargo Carrier Installation And Review Videos
Detail K2 20x60 Hitch Cargo Carrier Review - 2014 Dodge Journey- Video
Today on our 2014 Dodge Journey we're going to do a test fit on the Detail K2 20 by 60 folding cargo carrier. They've designed this for use in 2" hitches and it offers a 500 pound weight capacity. The part number on it is K2HCC602. To begin our test fit we'll slide the shank right into the receiver tube of our hitch. We'll slide it in far enough so we line up our pinhole with our hitch pinhole. We'll then take our standard 5/8 pin. We'll slide that through and then secure it on the other side with our clip. more
Watch Video
8/13/2014 3:40:05 PM
Curt 19x60 Hitch Cargo Carrier Review - 2014 Dodge Journey- Video
Today on our 2014 Dodge Journey we're going to test fit the CURT 19 by 60 Folding Cargo Carrier. It's designed for use with 2" hitches. It offers a 500 pound weight capacity. Part number on it is C18100. To begin our test fit we'll slide the shank of the carrier right into the receiver tube of our hitch. We'll slide it in far enough so that we line up our pinhole with our hitch pinhole. We'll then slide through our anti-rattle bolt and secure it on the other side with the clip. more
Watch Video
8/13/2014 3:38:36 PM
Curt 17x46 Hitch Cargo Carrier Review - 2014 Dodge Journey- Video
Today on our 2014 Dodge Journey we're going to be test fitting the 17X46 Curt Cargo Carrier. Its been designed for use with either an inch and quarter or two inch hitch. It offers a 500 pound weight capacity. Part number on it is C18145. To begin our test fit we're going to slide the shank of the carrier right into the receiver tube of our hitch. We'll need to slide it in far enough so that our threaded hole lines up with our hitch pin hole. We can then take our anti-rattle bolt and thread that in. more
Watch Video
8/13/2014 3:37:33 PM
MaxxTow Hitch Cargo Carrier Review - 2014 Dodge Durango MT70107- Video
Today on our 2014 Dodge Durango, we are going to be test fitting the 17x50 Maxxtow Cargo Carrier. This is designed for use in 2 inch hitches and it offers a 500 pound weight capacity. It's part number is MT70107. Now to begin our test fit, we are going to slide the shank of the carrier right into the receiver tube of our hitch. We'll slide it in far enough that the hole in the shank of the carrier is going to line up to the hole in the hitch. With those lined up we'll take a standard 5/8 pin, slide that through, and we'll secure it here on the other side using the clip. The closest point of the carrier to the back of our vehicle is going to be right here that's about 3 1/2 inches away. more
Watch Video
7/18/2014 12:02:51 PM
Curt 19x60 Hitch Cargo Carrier Review - 2014 Dodge Durango- Video
Today on our 2014 Dodge Durango we're going to be test fitting the CURT 19 by 60 cargo carrier. It's designed for use in 2" hitches and it offers a 500 pound weight capacity. Its part number is C18100. To begin our test fit we're going to slide the shank of the carrier right into the receiver tube of our hitch. As we slide it in we'll want to look through the pinhole here to determine when we have that in line with the hole in our rack. We can then take a standard 5/8 pin; we'll slide that through, secure it on the other side using the clip. Now in this position the cargo carrier is going to offer us about 9-3/4" worth of ground clearance. more
Watch Video
7/18/2014 11:39:59 AM
Surco Products 24x60 Hitch Cargo Carrier Review - 2014 Dodge Durango- Video
Today on our 2014 Dodge Durango we're going to be test fitting the 24x60 Surco cargo carrier. This is designed for use in 2 inch hitches and it offers a 500 pound weight capacity. It's part number is 52018. Now, to begin our test fit we're going to slide the shank of the carrier right into the receiver tube of our hitch. As we do this we'll want to line up the pin hole in the carrier and the pin hole in the hitch. With those lined up we're going to take a standard 5/8 pin, slide that through, and then take our clip on the other side here and secure it. more
Watch Video
7/3/2014 11:59:36 AM
Pro Series Solo Hitch Cargo Carrier Review - 2014 Dodge Durango- Video
Today on our 2014 Dodge Durango we're going to be test fitting the Pro Series Solo cargo carrier. It measures 31 by 47. It offers a 400 pound weight capacity and it's designed for use in 2" hitches. Its part number is PS1040100. To begin our test fit we're going to slide the shank of the carrier right into the receiver tube of our hitch. We'll slide it in and line up our pinholes. more
Watch Video
7/3/2014 6:03:04 AM
MaxxTow Wheelchair Carrier with Ramp Review - 2014 Dodge Grand Caravan- Video
Today on our 2014 Dodge Grand Caravan, we'll be test fitting the Maxxtow 30 x 50 wheelchair carrier, part number MT70260. We'll begin our test fit by sliding the shank of the carrier into the opening of the hitch, we'll secure it with a pin and clip and then using a wrench tighten down the two silver bolts to engage the anti-rattle device. With the carrier secured, we'll go over a couple of clearance measurement to see how the two fit together. We have about nine and one-half inches of ground clearance. Closest part of the carrier to the closest part of the vehicle is about a quarter of an inch and we have added about nine inches to the overall length of our vehicle. When using the anti-rattle device, the top portion of the silver bracket does come in contact with the bottom of the rear bumper fascia. We'll now go ahead and lower the platform. We'll do this by pulling the silver pin at the base of the bike rack and tilting the platform down. more
Watch Video
10/21/2013 9:13:44 AM
Surco Hitch Cargo Carrier Review - 2014 Dodge Grand Caravan- Video
Today on our 2014 Dodge Grand Caravan, we'll be test fitting the Surco Railed Cargo Carrier for Two-Inch Hitches, part number 52018. We'll begin our test fit by sliding the shank of the carrier into the opening of the hitch. We'll insert our pin and secure the clip on the other side. With the carrier secured, we'll go over a couple clearance measurements to see how the two fit together. We have about 12 inches of ground clearance at the rear of the carrier. The closest part of the carrier to the closest part of the vehicle is about a quarter of an inch away. We've added about 26 inches to the overall length of our Grand Caravan. Now, in this particular model, the exhaust does exit on the passenger's side and is tilted downward, about six inches away. more
Watch Video
10/16/2013 12:57:18 PM
SportRack Cargo Carrier Review - 2014 Dodge Grand Caravan- Video
Today, on our 2014 Dodge Grand Caravan, we'll be test fitting this 20x60 railed cargo carrier from SportRack, part number SR9850. We'll begin our test fit by sliding the shank of the carrier into the opening of the hitch. You can see that this cargo carrier cannot work in the fold-up position, so we'll simply pull the black pin at the base of the carrier and tilt the platform down. We'll then continue sliding the shank into the receiver tube and securing it with the anti-rattle bolt. With the carrier secured, we'll go over some clearance measurements to see how the 2 fit together. We have about 17-3/4 inches of ground clearance at the rear of the carrier. The closest part of the carrier to the closest part of the vehicle is about a quarter of an inch away, and we've added about 29 inches to the overall length of our Grand Caravan. more
Watch Video
10/16/2013 12:57:13 PM
Rola Dart Folding Hitch Cargo Carrier Review - 2014 Dodge Grand Caravan- Video
Today on our 2014 Dodge Grand Caravan, we'll be test fitting the 23 x56 Rola Dart Cargo Carrier for 2" Hitches, part number 59550. We'll begin our test fit by sliding the shank of the carrier into the opening of the hitch. We'll thread in the anti-rattle bolt, and tighten it down using a wrench. With the carrier secured, we'll go over some clearance measurements. With the platform folded up, we have about 11-1/2" of ground clearance. The closest part of the carrier, to the closest part of the vehicle is about 2", and we've added about 10" to the overall length of our Dodge. We can now pull-up on the orange handle and tilt the platform down. With the carrier in this position, we have about 17" of ground clearance at the rear. more
Watch Video
10/16/2013 12:56:57 PM
Pro Series Solo Hitch Cargo Carrier Review - 2014 Dodge Grand Caravan- Video
Today on our 2014 Dodge Grand Caravan we'll be test fitting the Pro Series Solo Cargo Carrier, part number PS1040100. We'll begin our test fit by sliding the shank of the carrier into the opening of the hitch. We'll line up the pin holes and secure it with the pin and clip. With the carrier secured, we'll go over a couple clearance measurements to see how the two fit together. We have about 15 inches of ground clearance at the rear of the carrier. The closest part of the carrier to the closest part of the vehicle is about 6 1/2 inches, and we've added about 38 1/2 inches to the overall length of our Grand Caravan.The cargo door does break over the surface of the carrier at about 14 inches. more
Watch Video
10/15/2013 4:16:08 PM
MaxxTow Aluminum Hitch Cargo Carrier Review - 2014 Dodge Grand Caravan- Video
Today on our 2014 Dodge Grand Caravan, we'll be test fitting the Maxxtow Rail Cargo Carrier part number MT70108. We'll begin our test fit by sliding the shank of the carrier into the opening of the hitch. We'll secure it with the pin and clip. With the carrier secured we'll go over a couple of clearance measurements to see how the two fit together. We have about 12 inches of ground clearance. Closest part of the carrier to the closest part of the vehicle is about 3 1/2 inches away and we've added about 26 inches to the overall length of our Grand Caravan. more
Watch Video
10/15/2013 12:55:57 PM
MaxxTow Hitch Cargo Carrier Review - 2014 Dodge Grand Caravan- Video
Today on our 2014 Dodge Grand Caravan, well be test fitting the Maxxtow Railed Cargo Carrier for 2 inch hitches, part number MT70107. Well begin our test fit by sliding the shank of the bike rack into the opening of the hitch. Well then secure the carrier to the vehicle with the pin and clip. With the carrier secured, well go over a few clearance of measurements to see how the two fit together. We have about 11-5/8 inches of ground clearance. Closest part of the bike rack to the closest part of the vehicle is 1-3/4 of an inch away. more
Watch Video
10/15/2013 12:55:55 PM
Curt Folding Hitch Cargo Carrier Review - 2014 Dodge Grand Caravan- Video
Speaker: Today on our 2014 Dodge Grand Caravan we'll be test fitting the Curt Cargo Carrier Part No. C-18132. We'll begin our test fit by sliding the shank of the carrier into the opening of the hitch. As you can see in the folded up position the Cargo Carrier cannot be installed. We'll pull the silver pin at the base of the carrier to pull the platform down and continue to slide the shank of the carrier into the opening of the hitch. We'll secure it with a pin and clip and go over some clearance measurements. We have about 18 inches of ground clearance at the rear of the carrier. Closest part of the carrier to the closest part of the vehicle is about 4 inches away and we've added about 36 1/2 inches to the overall length of our Grand Caravan. Now the exhaust on this model does exit on the passenger side and faces downward about 17 1/2 inches away. more
Watch Video
10/14/2013 2:19:21 PM
Curt Folding Aluminum Cargo Carrier Review - 2014 Dodge Grand Caravan- Video
Today on our 2014 Dodge Grand Caravan, we'll be test fitting the Curt Cargo Carrier for 2 inch hitches part number C18100. We'll begin our test fit by sliding the shank of the carrier into the opening of the hitch. As you can see the carrier cannot work in the folded up position, we'll pull the silver pin at the base of the carrier and tilt the platform down. We'll then continue to slide the shank into the receiver tube of the hitch and we'll then secure it with the pin and clip. With the carrier secured we'll go over some clearance measurements. We have about 13 1/2 inches of ground clearance. more
Watch Video
10/14/2013 2:17:55 PM
Curt Hitch Cargo Carrier Review - 2014 Dodge Grand Caravan- Video
Today on our 2014 Dodge Grand Caravan we'll be test fitting the Curt cargo carrier for an inch and a quarter and two inch hitches, part number C18145. We'll begin our test fit by sliding the shank of the carrier into the opening of the hitch. We'll thread in our anti-rattle bolt and then tighten it down using a wrench. With the carrier secured, we'll go over a couple clearance measurements to see how the two fit together. We have about twelve inches of ground clearance at the rear of the carrier. The closest part of the carrier to the closest part of the vehicle is about three-quarters of an inch away, and we've added about twenty and a quarter inches to the overall length of our Grand Caravan. Now on this model, the exhaust does exit on the passenger side and points downward about seven inches away. Therefore, it would be alright to carry heat sensitive materials on this cargo carrier. The cargo door does break over the surface of the carrier at about fourteen inches. That will complete today's test fit for the Curt cargo carrier, part number C18145, on our 2014 Dodge Grand Caravan. . more
Watch Video
10/14/2013 2:09:52 PM
Curt Folding Hitch Cargo Carrier Review - 2014 Dodge Grand Caravan C18131- Video
Today on our 2014 Dodge Grand Caravan, we'll be test fitting the Curt Cargo Carrier for 2 inch hitches part number C18131. We'll begin our test fit by sliding the shank of the carrier into the opening of the hitch. You can notice that the carrier cannot be used in the folded up position. We'll pull the silver pin at the base of the carrier and tilt the platform down. We'll then continue to slide the shank into the receiver tube and securing it with the pin and clip. With the carrier secured we'll go over some clearance measurements. more
Watch Video
10/14/2013 9:19:19 AM
Pro Series Solo Hitch Cargo Carrier Review - 2007 Dodge Durango- Video
Today on our 2007 Dodge Durango, well be test fitting the Pro Series 32 by 48 inch Solo Steel Cargo Carrier for 2 inch Hitches part number PS1040100. To begin our test fit, well slide the shank of the carrier into the receiver to the hitch. Line up the pin hole and install our pin and clip. Now, well go over a few clearance measurements. We have a ground clearance of about 22-1/2 inches. The closest point of the carrier to the rear of our vehicle is about 10-1/2 inches. more
Watch Video
8/22/2013 9:52:10 AM
MaxxTow Aluminum Hitch Cargo Carrier Review - 2007 Dodge Durango- Video
Today on our 2007 Dodge Durango, well be test fitting the Maxx Tow 22-1/2 49 inch Cargo Carrier for 2 inch Hitches part number MT70108. To begin our test fit, well slide the shank of the carrier into the receiver to the hitch. Line up the pin hole and install our pin and clip. Now, well go over a few clearance measurements. We have about 19 inches of ground clearance. The closest point of the carrier to the rear of our Durango is about 7-1/2 inches. more
Watch Video
8/22/2013 9:50:14 AM
MaxxTow Hitch Cargo Carrier Review - 2007 Dodge Durango- Video
Today on our 2007 Dodge Durango, well be test fitting the Maxx Tow 19 by 52 Cargo Carrier for 2 inch Hitches part number MT70107. To begin our test fit, well slide the shank of the carrier into the receiver to the hitch. Line up the pin hole and install our pin and clip. Now, well go over a few clearance measurements. We have about 19 inches of ground clearance. The closest point of the carrier to the rear of our Durango is about 5-1/4 inches. more
Watch Video
8/22/2013 9:48:12 AM
Curt Hitch Cargo Carrier Review - 2007 Dodge Durango- Video
Today on our 2007 Dodge Durango, well be test fitting the Curt 20 by 48 Cargo Carrier for 1-1/4 inch and 2 inch Hitches part number C18145. To begin our test fit, well slide the shank of the carrier into the receiver to the hitch. Line up the pin hole and thread in our anti-rattle bolt. Then well tighten it down with a wrench. Now, well go over a few clearance measurements. We have about 19-1/2 inches of ground clearance. more
Watch Video
8/22/2013 9:45:34 AM
Curt Folding Aluminum Cargo Carrier Review - 2007 Dodge Durango- Video
Today on our 2007 Dodge Durango, well be test fitting the Curt 20 by 60 Folding Aluminum Cargo Carrier for 2 inch Hitches part number C18100. To begin our test fit, well slide the shank of the carrier into the receiver to the hitch. Line up the pin hole and install our pin and clip. Now, well go over some clearance measurements with the carrier in the folded up position. We have about 17-1/2 inches of ground clearance. The closest point of the carrier to the rear of our Durango is about 2-3/4 inches. more
Watch Video
8/22/2013 9:41:00 AM
Rola Dart Folding Hitch Cargo Carrier Review - 2007 Dodge Durango- Video
Today on our 2007 Dodge Durango well be test fitting the 23x56 Rola Dart Cargo Carrier for 2-inch hitches, part number 59550. To begin our test fit well slide the shank of the cargo carrier into the receiver tube of the hitch, line up the pinhole and thread in our anti-rattle bolt tightening it with a wrench. Now well go over a few clearance measurements with the cargo carrier in this position. We have about 18-1/4 inches of ground clearance. The closest point of the carrier to the rear of our Durango is about 5 inches. Weve added about 14 inches to the overall length of our Dodge Durango. more
Watch Video
8/21/2013 2:52:44 PM
Surco Hitch Cargo Carrier Review - 2007 Dodge Durango- Video
Today on our 2007 Dodge Durango well be test fitting the Surco 24 x 60 inch cargo carrier for 2 inch hitches, part number 52018. To begin our test fit well slide the shank of the carrier into the receiver tube of the hitch, line up the pin hole, and install our pin and clip. Now well go over a few clearance measurements. We have about 19 inches of ground clearance. The closest point of the carrier to the rear of our Durango is about 4 inches. Weve added about 30 inches to the overall length of our Durango. more
Watch Video
8/20/2013 9:21:16 AM
Curt Folding Hitch Cargo Carrier Review - 2007 Dodge Durango- Video
Today, on our 2007 Dodge Durango, well be test fitting the 24x60 Curt Folding Cargo Carrier for two inch hitches, part number C18132. To begin our test fit, well slide the shank of the carrier into the receiver tube of the hitch. Line up the pin hole and install our pin and clip. Now, well go over a few clearance of measurements with the carrier in the folded up position, we have a about 18-3/4 inches of ground clearance. The closest point of the carrier to the rear of our Durango is about 2-1/4 inches. Weve added about 13-1/2 inches to the overall length of our Durango. more
Watch Video
8/16/2013 12:47:06 PM
Curt Folding Hitch Cargo Carrier Review - 2007 Dodge Durango C18131- Video
Today, on our 2007 Dodge Durango, well be test fitting the 20x60 Curt Folding Cargo Carrier for two inch hitches, part number C18131. To begin our test fit, well slide the shank of the carrier into the receiver tube of the hitch. Line up the pin hole and install our pin and clip. Now, well go over a few clearance of measurements with the carrier in the folded up position, we have a ground clearance of about 19 inches. The closest point of the carrier to the rear of our Durango is about 2-1/4 inches. Weve added about 13-1/2 inches to the overall length of our Durango. more
Watch Video
8/16/2013 7:45:17 AM
Rola Dart Folding Hitch Cargo Carrier Review - 2013 Dodge Grand Caravan- Video
Today on our 2013 Dodge Grand Caravan we will be test fitting the 23 x 56 ROLA Dart Cargo Carrier, part number 59550. To begin our test fit we will slide the shank of the carrier into the opening of the hitch, line up our pin hole, and then thread in our anti-rattle bolt and tighten it with a wrench. Now we will go ahead and go over a handful of measurements. We have about 16 inches of ground clearance at the rear of the cargo carrier. The closest part of the cargo carrier to the rear of our vehicle is about 3 inches. We've added about 36 inches to the overall length of our vehicle when our cargo carrier is unfolded. more
Watch Video
6/27/2013 10:52:22 AM
Pro Series Solo Hitch Cargo Carrier Review - 2013 Dodge Grand Caravan- Video
Today on our 2013 Dodge Grand Caravan well be test fitting the Pro Series 32x48 solo steel cargo carrier for two inch hitches part #: PS1040100. To begin our test fit well go ahead and slide the shank of the carrier into the hitch, line up the pinhole and install our hitch pin. We can then put the clip in on the other side, securing the cargo carrier to our vehicle. At this point well go over a few clearance measurements. We have a ground clearance of about 16 inches. The closest part of the carrier to the rear of the vehicle is about 6 and a half inches. more
Watch Video
6/27/2013 5:49:05 AM
Curt Hitch Cargo Carrier Review - 2013 Dodge Avenger- Video
Today on our 2013 Dodge Avenger, we'll be testing the Curt 20 by 48 Cargo Carrier Part Number C18145. Now, to begin our test fit, we slide the shank of the carrier into the opening of our hitch. Line up our pinholes and then thread our anti-rattle bolt through the pinholes and tighten with a wrench. Now, we'll go over some clearance measurements to see how our vehicle and our carrier come together. We have a ground clearance of 9 1/2 inches at the rear of our carrier. It's important to note that our bumper does overhang our cargo carrier a little bit. more
Watch Video
6/13/2013 7:53:26 AM
Curt Hitch Cargo Carrier Review - 2013 Dodge Dart- Video
Today on our 2013 Dodge Dart, we'll be test-fitting the Curt 20X48 cargo carrier, part number C18145. To install the cargo carrier, we'll begin by sliding the shank of the cargo carrier into the hitch. We'll line up our hitch pinhole and then install and tighten down our anti-rattle bolt. This makes our cargo carrier secure to our vehicle. At this point, we'll go over a few clearance measurements.We have a ground clearance of 9 1/2 inches, and the closest part of the carrier to the closest part of the rear of the vehicle is about half an inch. We've added 21 inches to the overall length of our vehicle and the exhaust on the dart exits the driver side. more
Watch Video
5/31/2013 12:51:37 PM
Pro Series Solo Hitch Cargo Carrier Review - 2013 Dodge Challenger- Video
Today on our 2013 Dodge Challenger, we'll be test fitting the Pro Series 32x48 solo steel cargo carrier for 2-inch hitches, part number PS1040100. Now to begin our test fit, we'll go ahead and slide the shank of the cargo carrier into the hitch, line up the hitch pin hole, and install our hitch pin. We can then put the clip on the other side of the pin, securing the cargo carrier to the vehicle. At that point, we'll go ahead and give you a few measurements. From the closest point of the cargo carrier platform to the back of the vehicle measures 2-1/4 inches. The cargo carrier will add an additional 34-1/2 inches of overall length to the vehicle. more
Watch Video
3/20/2013 10:41:32 PM
Surco Hitch Cargo Carrier Review - 2008 Dodge Nitro- Video
Today on our 2008 Dodge Nitro well be test fitting the Surco 24 inch by 60 inch cargo carrier, part number 52018. To mount our carrier to the vehicle well insert the shank of the carrier into the receiver tube of the hitch. Well line up our hitch pin hole and secure the carrier with a standard five-eighths inch pin and clip. Now well go over a hand full of clearance measurements. Weve got about 13 inches of ground clearance at the rear of the carrier. Weve got about five inches of clearance between the closest part of the carrier and the closest part of the vehicle. more
Watch Video
1/4/2013 3:00:12 PM
Curt Folding Hitch Cargo Carrier Review - 2008 Dodge Nitro- Video
Today on our 2008 Dodge Nitro well be test fitting the Curt 24 inch by 60 inch folding cargo carrier for two inch hitches, part number C18132. To mount our carrier to the vehicle well insert the shank of the carrier into the receiver tube of the hitch. Well line up our hitch pin holes and secure the carrier with a standard five-eighths inch pin and clip. Now well go over a hand full of clearance measurements with the cargo carrier folded up. Weve got about 14 inches of ground clearance and two and a half inches of clearance between the closest part of the carrier and the closest part of the vehicle when folded up. Weve added about 14 inches of overall length to the rear of the vehicle. more
Watch Video
1/4/2013 3:00:04 PM
Curt Hitch Cargo Carrier Review - 2008 Dodge Nitro- Video
Today on our 2008 Dodge Nitro well be test fitting the Curt 20 inch by 48 inch cargo carrier for one and a quarter and two inch hitches, part number C18145. To mount our carrier to the vehicle well insert the shank of the carrier into the receiver tube of the hitch. Well line up our hitch pin holes, thread in out anti-rattle bolt and tighten it down using a wrench. Next well go over a hand full of clearance measurements. Weve got about 14 inches of ground clearance at the rear of the cargo carrier. Weve got about five inches of clearance between the closest part of our bumper and the closest part of our carrier. more
Watch Video
1/4/2013 3:00:02 PM
Curt Folding Aluminum Cargo Carrier Review - 2008 Dodge Nitro- Video
Today on our 2008 Dodge Nitro we'll be test fitting the Curt 20 inch by 60 inch folding aluminum cargo carrier, part number C18100. To mount our carrier we'll insert the shank of the carrier into the receiver tube of our hitch. We'll line up our hitch pin holes and secure the carrier with a pin and clip. Next we'll go over a handful of clearance measurements. We've got about 12 1/2 inches of ground clearance and about 3 1/2 inches of clearance between the closest part of the bumper and the closest part of the carrier. Overall when folded up we've added about 11 inches of length to the rear of the vehicle. more
Watch Video
1/4/2013 10:36:04 AM
Surco Hitch Cargo Carrier Review - 2013 Dodge Durango- Video
Today on our 2013 Dodge Durango, we'll be test fitting the Surco 24x60 Cargo Carrier for 2-inch hitches, part number 52018. Now to begin our test fit, we'll slide the cargo carrier shank into the hitch, line up the hitch pin hole, and install our hitch pin. We can then put the clip on the other side of the pin which will secure our cargo carrier to the vehicle. We can now go ahead and give you a few measurements. From the closest point of our cargo carrier to the back of the vehicle is 4 inches and the cargo carrier itself will add an additional 29-1/2 inches of overall length to the vehicle. Our ground clearance here at the back of the carrier is 12-1/2 inches and the exhaust on this vehicle does exit the passenger's side here at the rear bumper. more
Watch Video
12/14/2012 2:42:06 PM
Rola Dart Folding Hitch Cargo Carrier Review - 2013 Dodge Durango- Video
Today on our 2013 Dodge Durango, we'll be test fitting the 23x56 Rola Dart Cargo Carrier for 2-inch hitches, part number 59550. Now to begin our test fit, we'll slide the cargo carrier shank into the hitch, line up the hitch pin hole, and install the anti-rattle bolt. With our bolt tight, our cargo carrier is secured to the vehicle. We'll now go ahead and give you a few measurements. With the platform in the stored position, from the closest point over the platform to the back of the vehicle is 5-1/2 inches. Ground clearance is 13 inches. more
Watch Video
12/14/2012 2:42:03 PM
Curt Hitch Cargo Carrier Review - 2013 Dodge Durango- Video
Today on our 2013 Dodge Durango well be test fitting the Curt 20x48 Cargo Carrier for inch and a quarter and two inch hitches, part number c18145. Now to begin our test fit using the included adapter for the two inch hitch well slide our cargo carrier shank into the hitch, line up the hitch pin hole, and install and tighten down the 00:00:19 bolt. With the bolt tight our cargo carriers secured to the vehicle. Well now go ahead and give you a few measurements. From the closest point of the cargo carrier to the back of the vehicle is two and a half inches, and this cargo carrier will add an additional 22 inches to the overall length of the vehicle itself. Our ground clearance here at the back of the cargo carrier is 12.5 inches. more
Watch Video
12/11/2012 1:45:36 PM
Curt Folding Aluminum Cargo Carrier Review - 2013 Dodge Durango- Video
Today on our 2013 Dodge Durango well be test fitting the Curt 20x60 Folding Aluminum Cargo Carrier, part number c18100. Now to begin our test fit well slide the cargo carrier shank into the hitch, line up the hitch pin hole, and install our hitch pin. We can then put our clip on the other side of the pin, which will secure our cargo carrier to the vehicle. Well now go ahead and give you a few measurements. Our ground clearance here at the cargo carrier is 11.25 inches. From the closest point of the carrier to the back of the vehicle is one and a half inches. more
Watch Video
12/11/2012 7:45:50 AM
Surco Hitch Cargo Carrier Review - 2013 Dodge Journey- Video
Today on our 2013 Dodge Journey well be test fitting the Surco 24 x 60 cargo carrier, part number 52018. To begin our test fit well slide the shank of the carrier into the opening of the hitch, line up our pin hole, slide our pin through our pinhole and secure with a clip. Now lets go over some clearance measurements to see how the cargo carrier and this vehicle fit together. Theres about 12 inches of ground clearance from the rear of the carrier. The closest part of the vehicle to the closest part of the carrier is about five inches. The closest part of the carrier to the closest part of the vehicles exhaust tip is about 11 inches. more
Watch Video
11/9/2012 9:05:05 AM
Surco Hitch Cargo Carrier Review - 2012 Dodge Grand Caravan- Video
Today on our 2012 Dodge Grand Caravan well be test fitting the Surco 24x60 Cargo Carrier for 2-inch hitches, part number 52018. To mount the carrier to our vehicle well insert the shank of the carrier into the receiver tube of our hitch. Well line up the pin holes and secure the carrier with a standard 5/8-inch pin and clip. Next well go over a handful of clearance measurements so you can get an idea of how the carrier will fit behind the vehicle. Weve got about 1 inch of clearance between the closest part of the carrier and the closest part of our caravan. Weve added about 26-1/2 inches of length to the rear of our vehicle. more
Watch Video
10/2/2012 10:42:33 AM
Curt Folding Hitch Cargo Carrier Review - 2012 Dodge Grand Caravan- Video
Today on our 2012 Dodge Grand Caravan well be test fitting the Curt 24-inch by 60-inch Folding Cargo Carrier for 2-inch hitches, part number C18132. Now there isnt enough rear bumper clearance for us to use this carrier in the folded up position, so were just going to have to lay it out flat and use it like a fixed cargo carrier. To mount our carrier to the vehicle well insert the shank of the carrier into the receiver tube of the hitch. Well line up the pin holes and secure the carrier with a standard 5/8-inch pin and clip. Next well go over some clearance measurements so you can get an idea of how the carrier fits behind the vehicle. Weve got about 17 inches of ground clearance at the rear of the carrier. more
Watch Video
10/2/2012 10:41:33 AM
Curt Hitch Cargo Carrier Review - 2012 Dodge Grand Caravan- Video
Today on our 2012 Dodge Grand Caravan well be test fitting the Curt 20x 48 cargo carrier part number C18145. Now our Caravan has a 2-inch hitch on it so well be using the adapter installed on our carrier. To mount the carrier, well insert the shank into the receiver tube of the hitch. Well line up our pinholes and then thread in our anti-rattle bolt, finally tightening it down with a wrench. Next well go over a handful of clearance measurements so you can get an idea of how the carriers going to fit behind the Grand Caravan. Weve got about 11 inches of ground clearance at the rear of the carrier. more
Watch Video
10/2/2012 10:41:13 AM
Curt Folding Hitch Cargo Carrier Review - 2013 Dodge Journey- Video
Today on our 2013 Dodge Journey well be test fitting the Curt 24-inch by 60-inch Folding Cargo Carrier, part number C18132. To mount our carrier to the vehicle well insert the shank of the carrier into the receiver tube of the hitch. Well line up our hitch pin holes and then well secure the carrier with a standard 5/8-inch pin and clip. Next, well go over a handful of clearance measurements. Weve got about 11-1/2 inches of ground clearance and 1 inch of clearance between the closest part of the carrier and the closest part of the vehicle. Overall, weve added about 13 inches of length to the rear of the vehicle with the carrier folded up. more
Watch Video
9/27/2012 2:57:47 PM
Curt Hitch Cargo Carrier Review - 2013 Dodge Journey- Video
Today on our 2013 Dodge Journey, we'll be test fitting the Curt 20x48-inch Cargo Carrier, part number C18145. To mount our carrier to the vehicle, we'll insert the shank of the carrier into the receiver tube of the hitch. We'll line up our hitch pin holes, thread in our anti-rattle bolt, and tighten it down using a wrench. Next, we'll go over a handful of clearance measurements. We've got about 12 inches of ground clearance at the rear of the carrier and 4 inches of clearance between the closest part of the carrier and the closest part of the vehicle. Overall, we've added about 23-1/2 inches of length to the rear of the vehicle. more
Watch Video
9/27/2012 2:57:04 PM
Curt Hitch Cargo Carrier Review - 2013 Dodge Grand Caravan- Video
Today on our 2013 Dodge Grand Caravan, we'll be test fitting the Curt 20x48-inch Cargo Carrier, part number C18145. To mount our carrier to the vehicle, we'll insert the shank of the carrier into the receiver tube of the hitch. We'll line up our hitch pin hole, thread in our anti-rattle bolt, and tighten it down using a wrench. Next, we're going to go over some clearance measurements. We've got about 10 inches of ground clearance at the rear of the carrier. We've got about 1-1/2 inches of space between the closest part of the carrier and the closest part of the vehicle, and overall, we've added about 21-1/2 inches of length to the rear of our vehicle. more
Watch Video
9/27/2012 2:56:47 PM
Curt Folding Aluminum Cargo Carrier Review - 2013 Dodge Journey- Video
Today on our 2013 Dodge Journey, we'll be test fitting the Curt 20x60-inch Folding Aluminum Cargo Carrier, part number C18100. To mount our carrier to the vehicle, we'll insert the shank of the carrier into the receiver tube of the hitch. We'll line up our hitch pin holes and secure the carrier with a standard 5/8-inch pin and clip. Next, we'll go over some clearance measurements. We've got about 12 inches of ground clearance and 1 inch of clearance between the closest part of the vehicle and the closest part of the carrier. Overall, we've added about 7 inches of length to the rear of the vehicle with the carrier folded up. more
Watch Video
9/27/2012 9:57:23 AM
UWS Aluminum Cargo Carrier Review - 2009 Dodge Journey- Video
Watch Video
9/13/2012 11:37:08 AM
Surco Hitch Cargo Carrier Review - 2009 Dodge Journey- Video
Watch Video
9/13/2012 10:47:47 AM
4
Filter Videos
Filter Videos
