Rhino-Rack Aero Roof Rack Installation - 2012 Honda Fit- Video
Today on our 2012 Honda Fit we'll be test fitting the Rhino Rack 2500 Series roof rack with the arrow crossbars measuring fifty inches long in silver, part number DA126. We'll also be using the custom DK clamps and pads for the Rhino Rack 2500 series roof rack systems, part number DK154. With our roof rack system assembled according to the instructions, we'll begin our test fit by opening our front doors. We'll grab our front bar and place it onto the front part of our roof. To ensure that we have this bar in the correct location, we need to measure 270 millimeters, or 27 centimeters, from the center of our door jamb to the center of our foot plate. We'll do this measurement on both sides to ensure that our feet are in line with each other. We can then use an allen key to tighten the allen bolt, which will secure the clamps around the roof line of our vehicle. We'll make our way from passenger side to driver side, tightening a little at a time so we don't lose our position. more
11/14/2013 2:06:59 PM
Thule Traverse Roof Rack Installation - 2012 Honda Fit- Video
Today on our 2012 Honda Fit we'll be test fitting the Thule Traverse Roof Rack System part number THLB50, TH480 and THKIT1465. Now with our fit kit and load bars already assembled according to the included instructions we'll begin our test fit by placing down our clear protective strip. We'll need to measure from the first part of the glass to the first part of the foot. Once we've established this position onto the roof of our vehicle we'll then place down the strips. We can then repeat the same steps for the opposite side of the vehicle.Once the strips are on we can set our front load bar onto the front of our roof. Once we've established this position we can use the included tension tool to tighten on the clips up against the roof of our vehicle. more
7/2/2013 3:01:38 PM
