Fifth Wheel Installation - 2013 GMC Sierra- Video
Today on our 2013 GMC Sierra short-bed, we'll be installing the under-bed rail and installation for Reese Elite Series 5th wheel trailer hitches, part number Rp30868. Now, we've already gone ahead and removed the spare tire and the spare tire shield from the vehicle. We've also gone ahead and removed the heat shield bolts as they are a little hard to get out. They are loctited in so you may need to cut them out depending on the age of the vehicle. We're now going to go ahead and remove our heat shield. We don't want to take it all down, so we're going to go ahead and cut it. The bolt here on the bed is not easily accessible. We'll go ahead and cut the shield around the bolt. more
10/16/2014 10:25:56 AM
Fifth Wheel Installation - 2012 GMC Sierra- Video
Today on our 2012 GMC Sierra Denali well be installing the 5th wheel hitch, part number RP30081 and the Reese base rail kit part number RP50066-58. Our first step will be installing the rear base rail. We need to measure from the end of the truck bed to the back edge of the rear base rail. Once we get our length, well then measure side to side to make sure were center of the bed.Now that weve got our base rail in position we need to go ahead and mark the holes. Im going to use a color paint pen so that it really stands out for me. Now with my holes marked out, Im going to go ahead and take an eight inch bit to make a pilot hole. more
5/25/2012 1:58:54 PM
Fifth Wheel Hitch Installation - 2008 GMC Sierra 2500 HD- Video
Today on this 2008 GMC Sierra 2500 HD we will be installing Curt fifth wheel Q5 with roller part number 50064 and part number 16500. We will also be installing the fifth wheel installation kit with rails part number 50061-6008. Go ahead and lower the spare tire up out of the way. Also on some models you will find that the heat shield over here on the passenger side will interfere with the installation of your frame brackets. If that is the case you may want to go ahead and remove the heat shield out of the way as well. Okay on the models that have the factory installed electrical brake control unit will need to relocate the electrical plug mounted to the inboard side of the driver side frame rail here. Loosen those up and you can see that we can actually take the heads of the bolts, slide the bracket forward, and pop them out those larger holes there. 00:59 more
12/15/2009 4:53:56 PM
Filter Videos
Filter Videos
