Inno Roof Bike Racks Review - 2011 Kia Sorento- Video
Speaker 1: Today on our 2011 Kia Sorento we're going to be test fitting the INNO Fork Lock III Roof Bike Rack. That's going to be Part Number INA391. As you can see, we already have a bike installed, so let's take a look at some of the features.If we come up and see how the bike is secured on the bike rack, we're going to see that it's connected at two different points of contact, one being this wheel strap on the back wheel. Now what's a nice feature about this is that this strap and the cradle can adjust along the bike rack to accommodate any length that your bike might be. Just simply just move it to the length you want, and once you do you just secure the strap on the back wheel like so.Moving up to the front and see how the front is secured, we have this clamp that's mounting our two forks of the front of our bike in, so keep in mind you will have to remove the front wheel of your bike to utilize this bike rack. How the clamping system works is once we get our forks in we have this clamp right here. more
8/29/2018 2:47:31 PM
Inno Multi-Fork Lock Bike Rack Review - 2011 Kia Sorento- Video
Today, on this 2011 Kia Sorento, we're going to show you the Inno Multi-fork Bike Carrier, part number INA392. Let's go ahead and take a look at out bike rack, already installed. We also have a road bike in place to help us point out some of the features. Our first look is that it has a nice, aerodynamic, shape to it. It has a nice curved cover that gives you access to your skewer as well as a guard to help keep the bike from being stolen. The skewer will hold a variety of different axles, 9 mm, 15 mm, and 20 mm three axle bikes. Now this whole assembly up front has a plastic housing on top and of course steel underneath for reinforcement and for the inner workings of the strap. more
5/11/2015 11:18:55 AM
Thule Spring Roof Bike Rack Review - 2011 Kia Sorento- Video
Today on our 2011 Kia Sorento we'll be test fitting the Thule Sprint roof-mounted better, part number TH528. With a Thule Rapid Crossroads roof rack system up on our roof we'll start off our test fit by placing the bike rack up onto the load bars. I'll start at the front and bring the rubber-coated steel straps around the underside of the bar and hook them up into the connection point. Then at the back of the front bracket we'll tighten down the AcuTight knob. Moving to the rear, we'll again bring the strap around the rear bar and use the AcuTight hardware to tighten it down. With everything all tightened down and secured, we're ready to load up a bike. We'll need to loosen up the nose of the bike rack, which will spread the secure out so that the forks can slide down onto it. more
10/8/2014 3:06:07 PM
SportRack Roof Mounted Bike Rack Review - 2011 Kia Sorento- Video
Today on our 2011 Kia Sorento, we'll be test fitting the Sport Rack Roof Mounted Bike Rack, part number SR4622. Today, we have a Thule Rapid Crossroads roof rack up on our Sorento, so we'll begin our test fit by placing the bike rack up on to the load bars. Starting at the front, we'll take the rubber coated u bolts to go on the underside of the front bar, up through the pre drilled holes at the head of the carrier. We'll then take our black wing nuts to thread down on to the U bolts. With that done, we'll go ahead and move to the rear and we'll need to take the black spacer which will go on the underside of the bike rack and the top of the rear load bar. We'll take the black bolts to go down through the holes and then we'll take the rubber coated steel plate to go on the underside of the rear bar. We'll insert the bolts through the holes in the plate and then install our wing nuts. With everything all tightened down and secure, we're ready to load up our bike. more
10/5/2014 10:02:08 AM
Kuat TRIO Roof Bike Rack Review - 2011 Kia Sorento- Video
Today on our 2011 Kia Sorento we'll be test fitting the Kuat Trio roof-mounted bike rack, part number RU01. Now today we have a Thule Rapid Crossroads roof rack up on our roof, and we'll begin our test fit by placing the bike rack onto the load bars. Starting at the front we'll need to take the rubber-coated u-bolts to go around the underside of the front bar, up through the pre-drilled holes at the head of the carrier. We'll then thread on our cylinder nuts through the top of the bike rack, down onto the u-bolt. Once we have those in place we can then tighten them down with the included tool. We'll then move to the rear and swing the rubber-coated bracket around the underside of the rear bar. We'll need to remove one of the black nuts and insert the bolt through the hole of the plate. more
10/5/2014 5:01:39 AM
Swagman Upright Roof Mounted Bike Rack Review - 2011 Kia Sorento- Video
Today on our 2011 Kia Sorento, well be test fitting the Swagman Upright Roof Mounted Bike Rack, part number S64720. With the Thule rapid crossroads roof rack system up on our roof, well begin our test fit by placing the bike rack up onto the load bars. Starting at the front here, well take the silver U-bolts to go on the underside of the front bar up to the predrilled holes at the head of the bike rack. Well then take our black wing nuts to thread down onto the U-bolts. With this done and tightened down, we can move to the rear and slide the silver U-bolt down on top of the bike rack through the predrilled holes, and then take the black plate which will slide onto the U-bolt, and then well thread on our black wing nut. Well swing the plate around the underside of the rear bar and install our other wing nut. Now that everything is all tightened down and secured, were ready to load up our bike. more
9/23/2014 2:22:36 PM
Thule Big Mouth Roof Bike Rack Review - 2011 Kia Sorento- Video
Today on our 2011 Kia Sorento we'll be testing a Tule Bigmouth roof-mounted bike rack, part number Th599XTR. With the Tule crossroads roof rack system assembled onto our vehicle, we'll begin our test by placing the bike rack up onto the vehicle's bars. Starting at the front, we'll bring the bracket around the underside of the front bar, and insert the T bolt into the designated spots. We can then turn the black wing nuts to tighten down the clamps up against the front bar. Now moving to the rear, we'll remove one of the wing nuts to bring the rear bracket around the underside of the bar. We'll then reinstall our wing nut to secure the rear part of the bike rack to the bar. more
9/16/2013 8:14:28 AM
