Yakima FrontLoader Roof Bike Rack Review - 2014 Chevrolet Malibu- Video
Today on our 2014 Chevrolet Malibu we're going to be test fitting the Yakima FrontLoader, a wheel-mount roof bike rack, with part number Y02103. With our Rhino-Rack 2500 series roof rack already on the Malibu, we'll begin our test fit by placing our bike rack directly onto the cross bars. At the front we'll bring the clamp around the bar. We should have two tabs on the front side of our load bar and one tab on the rear. We'll then tighten the black T-handle to secure it to our rack. With our front secure we can move to the rear. Here we're going to loosen the black T-handle, remove the T-bolt from the slot in the lower portion of our clamp, bring our clamp around our bar, reinsert the T-bolt into the lower portion of our clamp, and tighten down the black T-handle until it's secure. With the rack secure to our vehicle it's now time to load our bike. We'll begin by undoing our rear wheel strap and extending our front wheel cradle all the way out. more
5/29/2014 4:06:24 PM
Yakima ForkLift Roof Mounted Bike Rack Review - 2014 Chevrolet Malibu- Video
Today on our 2014 Chevrolet Malibu we're going to be test fitting the Yakima ForkLift, a fork mount roof bike rack with part number Y02098. With our Rhino Rack 2500 Series Roof Rack already installed on the Malibu, we'll begin our test fit by placing our bike rack directly onto our crossbars. Here at the front we're going to remove the skewer, slide back the black plastic cover, and loosen the t-handle located here. We'll then remove the t-bolt from the lower half of the clamp, bring the clamp around our load bar, reinsert the t-bolt, and tighten down the black t-handle until the front of the rack is secured to our bars. We'll then slide forward the black cover and replace our skewer. With our front secure we'll move to the rear and again we're going to loosen the black t-bolt, remove the t-bolt from the lower half of the clamp, bring the clamp around our bar, reinsert the t-bolt in the appropriate slot, and tighten it with the black t-handle. With our rack secured to our vehicle it's now time to load our bike. We'll first undo our rear wheel strap and make sure that our front skewer is loose and open. more
5/29/2014 4:06:16 PM
Thule Sprint Fork Mount Bike Rack Review - 2014 Chevrolet Malibu- Video
Today on our 2014 Chevrolet Malibu we're going to be test fitting the Thule Sprint, a fork mount roof bike rack with part number TH528. With our Thule Rapid Traverse roof rack system already installed on the Malibu, we'll begin our test fit by placing our bike rack directly onto our load bars. Here at the front we'll bring the black rubber coated metal strap around the underside of our load bar and fit it back into the head of the carrier. We can then turn the small black lever to tighten it in place. We found that initially it's better to have it straight to get the slack out and then turn it at a 90 degree angle to get some good torque on it. With the front secure we'll now move to the rear. Again, we'll bring the black rubber coated metal strap around the underside of our load bar, fit it back into the foot of the carrier, and then use the black lever to tighten it down. With our rack secured to our vehicle, it's now time to load our bike. We'll begin by undoing our rear wheel strap and loosening our front skewer by turning the knob on the front. more
5/29/2014 4:05:56 PM
Swagman Upright Roof Mounted Bike Rack Review - 2014 Chevrolet Malibu- Video
Today on our 2014 Chevrolet Malibu, were going to be test fitting the Swagman Upright Roof Bike Rack, part number S64720. With our Thule Rapid Reverse Roof Rack system already installed on the Malibu, well begin our test fit by placing our bike rack directly onto our load bars. Here at the front, well bring one of the U-bolts around the underside of our load bar, fit it through the head of the carrier, and hold it in place with two wing nut. Well take a second U-bolt, bring it around the underside of our load bar, fit it through the other side of the head of the carrier, and secure it in place with two wing nuts. Well then tighten down all four wing nuts to secure the rack to our front load bar. Here at the rear, well place our U-bolt down through the rack, being sure that it comes out on both sides of our load bar. Well then place the black rubber coated metal plate onto the U-bolt and hold it in place with two wing nuts. Well then tighten these down to secure the rear of our rack. With our rack secure, its now time to load up our bike. Well first undo our wheel straps and make sure that our frame clamp is open. more
5/29/2014 2:44:43 PM
Swagman Fork Down Roof Bike Rack Review - 2014 Chevrolet Malibu- Video
Today on our 2014 Chevrolet Malibu, we're going to be test fitting the swagman fork mount, a fork mount roof bike rack with part number S64710. With our Tully Rapid Traverse Roof Rack system already installed on our Malibu we're going to begin our test fit by placing our bike rack directly onto our load bars. Here at the front, we'll bring one of the U-bolts around the underside of our load bar, fit it through the head of our carrier, and hold it in place using two of the wingnuts. We're going to take a second U-bolt, again fit it around the underside of our load bar through the head of our carrier, and secure it as well using the two wingnuts. We'll now tighten all four of our wingnuts down to secure the head of our carrier to our rack. We'll now move to the rear. Here we're going to place the U-bolt through the rack, being sure that it comes out on both sides of our load bar. We'll then place on the black metal plate and hold it in place using two wingnuts. more
5/29/2014 2:41:26 PM
RockyMounts TieRod Stretch Roof Bike Rack Review - 2014 Chevrolet Malibu- Video
Today on our 2014 Chevrolet Malibu, we are going to be test fitting the Rockymounts Tie Rod Stretch, a fork mount rook bike rack with part number RKY10111 with our Thule Rapid Traverse roof rack system already installed on our Malibu. We are going to begin our test fit by placing our bike rack directly onto our load bars. Here at the front we are going to remove our black plastic cover and fit the straps into the head of the carrier in the appropriate slots. We'll then take an Allen key, tighten the Allen bolt to secure the front of our rack. With the front secure, we'll replace the black plastic cover and then we can move to the rear. Here at the rear we are going to remove one of the Allen bolts completely, bring our clamp around our load bar, reinsert the Allen bolt and tighten both Allen bolts down with an Allen key. With our rack secure, it's now time to load our bike. We'll begin this by undoing our rear wheel strap and making sure that our front skewer is open and loose. We'll now grab our bike, place it on to our bike rack, we'll guide our front forks onto our front skewer, we'll secure it here first then we can move to the rear wheel and secure it with the strap. Just like that our bike is loaded up and we are ready to hit the road and that will complete today's test fit of the Rockymounts Tie Road Stretch part number RKY1011 on our 2014 Chevrolet Malibu. more
5/29/2014 2:38:14 PM
Kuat TRIO Roof Bike Rack Review - 2014 Chevrolet Malibu- Video
Today on our 2014 Chevrolet Malibu were going to be test fitting the Kuat Trio, a fork mount roof bike rack with part number RU01. With our Thule Rapid Traverse roof rack system already installed on the Malibu well begin our test fit by placing our bike rack directly onto our load bars. Here at the front well bring the black rubber coated metal U bolts around the underside of our load bar, put it through the head of the carrier and hold it in place with the two cylinder nuts. Well take the second black rubber coated U bolt, and again bring it around the underside of our load bar, through the head of our carrier and place two cylinder nuts on it. We can then take our provided Allen tool and tighten how all four of these cylinder nuts down, firmly securing our rack to our front load bar. At the rear were going to completely remove one of the wing nuts, slide our clamp into position to where we have one of the bolts coming down on both sides of our load bar, bring the metal plate up, fit the bolt through it and replace our wing nut. more
5/29/2014 2:36:25 PM
