Thule Domestique Roof Bike Rack Review - 2011 Ford Edge- Video
Today on our 2011 Ford Edge we'll be test fitting the Thule Domestique Fork Mounted Bike Carrier, part number th513. With a roof rack system already assembled onto our vehicle we'll go ahead and place our carrier directly onto our load bars. We'll take the front clamp and place it around our front load bar feeding the bolts through the top and tightening our bolts with an Allen key.Once we have our front clamp secured we can then move to the rear. We'll fit our clamp around the rear load bar making sure our bolts are in the proper place and then tighten with an Allen key. We'll go back to the front and install our skewer. We'll go ahead and make sure we leave it open for easier loading of our bike.We'll move to the rear and undo the rear wheel strap. more
6/28/2013 3:49:10 PM
Swagman Fork Down Roof Bike Rack Review - 2011 Ford Edge- Video
Today on our 2011 Ford Edge we'll be test fitting the Fork-Style Roof Mounted Bike Carrier from Swagman, part number s64710. With a roof rack system assembled onto our vehicle we'll begin by placing our carrier directly on top of our load bars. We'll begin at the front. We'll take our U-bolts bring them up through our bracket from underneath our front load bar.We'll secure our U-bolts by tightening down the wing nuts from the top of our carrier. Once we have both the clamps at the front tight we can then move to the rear of the carrier where we'll feed the U-bolt through the top of our carrier around our load bar. We'll bring our clamp up underneath our rear load bar making sure that our U-bolts go through the clamp and tighten with the wing nuts.This secures our carrier to our roof rack system. more
6/28/2013 3:43:47 PM
RockyMounts TieRod Stretch Roof Bike Rack Review - 2011 Ford Edge- Video
Today on our 2011 Ford Edge, well be test fitting the Rocky Mounts TieRod Stretch Roof Mounted Bike Carrier part number RKY1011. With a roof rack system already assembled on to our vehicle, well go ahead and place our carrier directly on top of the load bars. Well remove the front cover to gain access to the Allen bolt where we can tighten down the straps by using an Allen Key. Once we have the front part of our carrier secured we can go ahead and replace our black plastic cover and then move to the rear. Well fit our bracket around our rear load bar, feed the bolt through, make sure our bolts are in place and tighten down with an Allen key. With our bike rack secured to our roof rack system we can then prepare to load our bike. more
6/28/2013 3:42:55 PM
