bing tracking image

2011 Chevrolet Silverado Trailer Brake Controller Installation And Review Videos

     

Best 2011 Chevrolet Silverado Trailer Brake Controller Options- Video

Best 2011 Chevrolet Silverado Trailer Brake Controller Options

Speaker 1: Today we're going to be taking a look at the best brake controllers available for the 2011 Chevrolet Silverado 1500, 2500, and 3500. Now these brake controllers have been chosen for a few different reasons. Ease of use is the most important. We really like one that's not too hard to use, but also our experience with them here in the shop. We have our favorites. Then, also, our customer. more


Watch Video

7/18/2018 11:02:43 AM



Trailer Brake Controller Installation - 2011 Chevrolet Silverado- Video

Trailer Brake Controller Installation - 2011 Chevrolet Silverado

Today on our 2011 Chevy Silverado, well be installing the Tekonsha brake controller 90195. So, our first step will be to locate the manufacturers wiring that will be connecting our brake controller wiring. Here above the brake pedal is the manufacturers wiring outside of any wiring loom. Youll notice therell be five wires as in orange, which we will not be using, the dark blue which will be our brake signal that will go to our seven poll, a light blue wire which will be the brake pedal signal, a red wire with a black tracer which will our power wire and then a white wire which will be our ground. Ill go ahead and cut some of the excess length off, as we will not need at all. Now well go ahead and strip back each one and a butt connector. more


Watch Video

6/6/2012 11:49:39 AM



Trailer Brake Controller Installation - 2011 Chevrolet Silverado tk90160- Video

Trailer Brake Controller Installation - 2011 Chevrolet Silverado tk90160

Today on this 2011 Chevy Silverado, were gonna install the Tekonsha PRIMUS IQ Brake Controller part number 90160.Our first step is to identify the manufacturers wires that we need to make our connection as seen here under the dash that theyve taped up. Im gonna go ahead and cut that connection and pull them free.The manufacturer has five wires here. Were actually only going to use four of them. The orange one will not be used. The red wire with the black stripe, were gonna match it up with our black wire that goes to the pigtail that well connect with our brake controller. Ill go ahead and make that connection now.The red wire with the black stripe is gonna be our power. more


Watch Video

12/20/2011 12:07:22 PM



  1