Trailer Hitch Installation - 2010 Ford Explorer - Draw-Tite- Video
Today on our 2010 Ford Explorer we're going to take a look at, and also show you how to install, the Draw-Tite Max-Frame Custom Fit Trailer Hitch Receiver. It's part number is 75437. Here's what our hitch is going to look like installed on the vehicle. You'll see we're going to have that round tube that's going to go between those side plates, which go right up and connect to our frame. Here in the middle we've got our two inch by two inch receiver tube opening. Now, this class three hitch, it's going to work out great for just about any type of accessory you might want to put in here. Now, you do notice the factory hitch that we've got here. Now, this is an inch and a quarter by inch and a quarter hitch. more
1/23/2017 9:24:34 AM
Trailer Hitch Installation - 2010 Ford Explorer - Curt- Video
Today on our 2010 Ford Explorer we're going to be installing the CURT trailer hitch receiver, part number 13112. Now here's what our hitch looks like installed on our vehicle. Now you will notice when installing the new receiver you will not be removing the old 1-1/4" receiver that's already installed on this vehicle. The new receiver will actually go down below. Now you'll also notice here that there's a 4-flat wiring plug and bracket already installed on this vehicle. We're going to need to remove that bracket for now so we can install the new hitch. more
1/13/2015 1:09:03 PM
