2018 Chevrolet Colorado Accessories and Parts Installation And Review Videos

Roadmaster Battery Charge Line Kit Installation - 2018 Chevrolet Colorado- Video

Today we'll be taking a look at the Roadmaster battery charge line kit as part of a complete flat tow setup for your 2018 Chevrolet Colorado. We'll start with our base plate, which will be using Roadmaster's EZ5 base plate kit. In addition, we'll be using Roadmaster's diode wiring kit, SMI's Stay-IN-Play DUO supplemental braking system, Roadmaster's battery charge line kit, Roadmaster's automatic battery disconnect switch, Roadmaster's Falcon All-Terrain non-binding tow bars, and lastly, Roadmaster's 64" single-hook safety cables.So you're looking to flat tow your Chevrolet Colorado Well we've got our whole setup here, and there's several components we're going to need to complete that. Let's go over those now. The first component you're going to need is your base plate. This is the interface that's going to allow your vehicle to be connected to your motor home and pulled behind it. more

1/8/2019 8:22:46 AM

Roadmaster Flexo-Coil Kit Installation - 2018 Chevrolet Colorado- Video

Speaker 1: Today on our 2018 Chevrolet Colorado we're going to be taking a look at and showing you how to install the Roadmaster seven wire to six wire flexo coil kit, part number RM-146-7. We have our cable router along our tow bar here. As you can see the coiledness of it is going to keep it nice and taut. We won't have to worry about it dragging the ground, but it is extendable up to past eight feet, so we're going to have plenty of room to make our connections.So we'll dust cover off of the back, and we're going to slide the wires through it. Let's go ahead and push it back so we have plenty of room to work with. Now, if we look at the back our plug here, each one of these terminals is going to be labeled. more

10/16/2018 12:51:57 PM

Roadmaster Automatic Battery Disconnect Installation - 2018 Chevrolet Colorado- Video

Speaker 1: Today on this 2018 Chevrolet Colorado, we'll be having a look at and showing you how to install the Roadmaster Automatic Battery Disconnect with Switch for towed vehicles, part number RM-766.Here's what your battery disconnect looks like installed. Now, the reason you're going to want this on the Colorado when you're flat towing this behind your motor home, Chevrolet does require the battery to be disconnected. This will save you time and energy from having to open the hood and manually remove your battery terminal. This will do it automatically via a solenoid built into this disconnect via a simple press of a switch inside the vehicle. We'll show you that now.With our battery connected, our engine starts normally. When we disconnect it, we have no power at all anymore and our vehicle is now safely in tow mode without us doing anything under the hood. more

7/10/2018 12:27:46 PM