bing tracking image

2006 Chevrolet Express Van Windshield Wipers Installation And Review Videos

     

Michelin Stealth Wiper Blades Installation - 2006 Chevrolet Express Van- Video

Michelin Stealth Wiper Blades Installation - 2006 Chevrolet Express Van

All right today, on this 2006 Chevrolet Express Van we're going to install part number MCH8022 from Michelin. This Michelin Stealth Wiper blade. Now for your van, you're going to need two of this part number. Each side of the van uses the same size wiper blade. Now to start to install, we'll go ahead and remove the original wiper blades. There is a small tab that you can push up or down to release the old wiper blade from the arm. more


Watch Video

6/26/2014 4:43:42 PM



Michelin Stealth Ultra Wiper Blades Installation - 2006 Chevrolet Express Van- Video

Michelin Stealth Ultra Wiper Blades Installation - 2006 Chevrolet Express Van

Today, on this 2006 Chevrolet Express van, we're going to install part number MCH8522. This is a Michelin Stealth Ultra windshield wiper blade. A few things to know about these windshield wiper blades is that it has an aerodynamic shape to help make it slip through the air and prevent the wiper from being lifted by the wind. There's a graphite coating on the squeegee, and the natural-rubber squeegee has a stainless-steel flexor built into it to help keep its shape. The frame has a rust-resistant powder-coated finish to protect it. To install our new wiper blades, we're going to have to remove the original ones. Typically, there's a small tab you have to push up or down to remove it from the arm. more


Watch Video

6/19/2014 4:22:13 PM



Michelin RainForce Wiper Blades Installation - 2006 Chevrolet Express Van- Video

Michelin RainForce Wiper Blades Installation - 2006 Chevrolet Express Van

Today, on this 2006 Chevrolet Express van, we're going to install part number MCH3722. This is the Michelin RainForce windshield-wiper blade. The vehicle uses two of the same size windshield-wiper blades. To start off, we need to go ahead and remove the existing blades. Typically, there is a tab you have to push up or down to release it from the arm. We'll go ahead and disconnect it, set the arm down, and then we'll grab the new one. Our J-style connector goes into our easy-lock. more


Watch Video

6/17/2014 8:48:56 AM



  1