Best 2009 Chevrolet Impala Trailer Hitch Options- Video
Rob: Rob here at etrailer.com, and today we're going to be taking a look at the best hitch options for your 2000 through 2013 Chevrolet Impala. Up top here, we're going to have our CURT, which is going to be a Class 2. Then right below that, we're going to have our Draw-Tite, which is also going to be a Class 2.If I we're looking for a hitch for my Impala, I would go with the Draw-Tite, but let's take a closer look at both of our hitches. Now the first thing you might notice is that both of our hitches are going to look very similar and have a very similar design. That's partially because they're going to install exactly the same way. They're going to use factory mounting locations and we're not going to have to drill or cut anything, but we are going to have to fish wire some hardware in place and lower our exhaust.One of the only differences that you're really going to notice is going to be the collar on the end of the receiver tube. more
3/28/2019 7:02:19 PM
Trailer Hitch Installation - 2009 Chevrolet Impala - Hidden Hitch- Video
Today on our 2009 Chevrolet Impala we'll be installing the Hidden Hitch, part number 90137. Here's what the hitch looks like installed on our vehicle. Now we'll go ahead and give you a couple measurements in helping you choose some accessories for your hitch, such as a ball mount, a bicycle rack, or a cargo carrier. From the center of the hitch pinhole to the outermost edge of the bumper is approximately 7". From the top of the opening in the receiver to the ground is approximately 13-1/2". Now let's go ahead and put our hitch on. To begin with we will need to lower the exhaust out of the way so we can access the mounting locations on the passenger side of the vehicle. more
10/27/2014 9:16:33 AM
Trailer Hitch Installation - 2009 Chevrolet Impala - Draw-Tite- Video
Today on our 2009 Chevy Impala we'll be installing the Draw-Tite hitch, part number 36407. Here's what the hitch looks like installed on our vehicle. Now we'll go ahead and give you a couple measurements in helping you choose some accessories for your hitch, such as a ball mount, a bicycle rack, or a cargo carrier. From the center of the hitch pinhole to the outermost edge of the bumper is approximately 7". From the top of the opening in the receiver to the ground is approximately 13-1/2". Now let's go ahead and put our hitch on. To begin with we will need to lower the exhaust out of the way so we can access the mounting locations on the passenger side of the vehicle. more
10/27/2014 9:15:33 AM
