Best 2003 Chevrolet Impala Trailer Hitch Options- Video
Rob: Rob here at etrailer.com, and today we're going to be taking a look at the best hitch options for your 2000 through 2013 Chevrolet Impala. Up top here, we're going to have our CURT, which is going to be a Class 2. Then right below that, we're going to have our Draw-Tite, which is also going to be a Class 2.If I we're looking for a hitch for my Impala, I would go with the Draw-Tite, but let's take a closer look at both of our hitches. Now the first thing you might notice is that both of our hitches are going to look very similar and have a very similar design. That's partially because they're going to install exactly the same way. They're going to use factory mounting locations and we're not going to have to drill or cut anything, but we are going to have to fish wire some hardware in place and lower our exhaust.One of the only differences that you're really going to notice is going to be the collar on the end of the receiver tube. more
3/28/2019 6:42:16 PM
Trailer Hitch Installation - 2003 Chevrolet Impala- Video
Today on this 2003 Chevrolet Impala we are going to install part number 24681 from Draw-Tite. The first thing that we are going to do is show you where the hitch mounts up on the vehicle. There are two existing holes here and here, on the bottom of the vehicle that are already drilled out. But we still have to enlarge these to 1/ 2 inch. And also, on this first cross member in the back, before the spare tire well, is going to be an existing hole here and here. And just to make things easy too, you can actually hold up the hitch, center it and it will show you which holes to drill out. Alright, let us get going and drill out all of the holes we need. 0:56 more
5/19/2010 7:19:59 AM
