Best 2002 Chevrolet Impala Trailer Hitch Options- Video
Rob: Rob here at etrailer.com, and today we're going to be taking a look at the best hitch options for your 2000 through 2013 Chevrolet Impala. Up top here, we're going to have our CURT, which is going to be a Class 2. Then right below that, we're going to have our Draw-Tite, which is also going to be a Class 2.If I we're looking for a hitch for my Impala, I would go with the Draw-Tite, but let's take a closer look at both of our hitches. Now the first thing you might notice is that both of our hitches are going to look very similar and have a very similar design. That's partially because they're going to install exactly the same way. They're going to use factory mounting locations and we're not going to have to drill or cut anything, but we are going to have to fish wire some hardware in place and lower our exhaust.One of the only differences that you're really going to notice is going to be the collar on the end of the receiver tube. more
3/28/2019 6:37:19 PM
Trailer Hitch Installation - 2002 Chevrolet Impala- Video
All right today on this 2002 Chevrolet Impala we are going to install part number 36407 from Draw-Tite. This also applies to Hidden Hitch part number 90137. We are looking at the driver side of the frame rail here. And this is where the hitch is going to install, on these two existing holes right here. Okay, and also at the cross number at the rear of the vehicle, this hardware is going to be installed using this existing hole also. Going over to the passenger side is going to be identical except we are going to have to lower the exhaust to get access to that side. All right, we will go ahead and unbolt the bracket. All right next we are going to install a strap to control the exhaust and we will take down this back rubber hanger too to give us a little more room. more
8/21/2009 4:23:24 PM
