Best 2012 Buick Enclave Trailer Hitch Options- Video
Speaker 1: Today, this 2012 Buick Enclave, we'll be having a look at our best trailer hitch options.We have three hitches here today. All of them are Class 3 two by two-inch receivers. On the top, we have a Draw-Tite. In the middle, we have a Curt. And on the bottom, we have the etrailer.com hitch.First we'll give you a brief summary. As far as towing use goes, we found the Draw-Tite hitch here to be the better option, simply because it does have an electrical mounting bracket in order to mount any of our wiring harnesses that we may need to tow our trailer, such as that four bolt flat or seven way RV. more
7/18/2018 11:32:39 AM
Trailer Hitch Installation - 2012 Buick Enclave - Draw-Tite- Video
Today on our 2012 Buick Enclave we'll be installing the Draw-Tite Hitch, part number 75528. Here's what our hitch will look like once it's installed. Next we'll go ahead and give you a couple measurements to assist your selecting accessories for your new hitch. From the center of the hitch pin holes to the outer most edge of the bumper it's 4 and 3 quarter inches. From the top of the receiver tube opening to the ground is 18 and a quarter inches. This will assist your selecting accessories such as ball mount, bike rack or cargo carrier. Now we'll go ahead with the installation. To get our install we'll first need to remove the rear fascia door. more
10/17/2014 1:02:51 PM
Trailer Hitch Installation - 2012 Buick Enclave - Curt- Video
Today on our 2012 Buick Enclave, we'll be installing part number 13424 from Curt. Here are a couple of measurements to help you when selecting accessories. From the top of the receiver tube to the ground is 18-3/4 and from the center of the hitch pinhole to the outermost point of the bumper is 4-1/4. Now well go ahead with our install. To begin our install, well need to remove the cover here at the rear bumper. To do that well just undo the clasps on either side. more
3/23/2012 2:57:39 AM
