UWS Aluminum Cargo Carrier Review - 2007 Honda Pilot- Video
Today we have with us the 2007 Honda Pilot. Well be test fitting UWSs 23 inch by 51 inch aluminum cargo carrier part number uws03511. To mount the cargo carrier to our vehicle well insert the shank of the carrier into the receiver tube of our vehicle. Well line up the hitch pin holes, and insert our hitch pin securing it with a clip on the other side. Once weve done that our cargo carrier is installed and ready to load up. Next well go over some clearance measurements. more
7/19/2012 1:59:41 PM
Surco Folding Hitch Cargo Carrier Review - 2007 Honda Pilot- Video
Today we have with us a 2007 Honda Pilot. Well be test fitting Surcos 24 inch by 60 inch folding cargo carrier part number 52018f. To mount this carrier to our vehicle well insert the shank of the carrier into the receiver tube of our hitch. Well line up the hitch pin holes, feed our pin through and secure it with a clip. Now well check for some clearance measurements while we have the cargo carrier still folded up. From the closest point of our carrier to the furthest point of our bumper measures about two and a half inches of clearance. more
7/19/2012 12:49:25 PM
Curt Hitch Cargo Carrier Review - 2007 Honda Pilot- Video
Today we have with us a 2007 Honda Pilot. Were going to be test fitting Curts 20 inch by 48 inch cargo carrier, part number c18145. To mount our cargo carrier to our vehicle well insert the shank of the carrier into the receiver tube of the hitch on the Pilot. Well line up the hitch pin holes, thread in our anti rattle bolt and well tighten it down with a three quarter inch wrench finally securing it with a clip on the other side. Now well go over some clearance measurements. Weve got about two and three quarter inches clearance from the furthest part of our vehicle to the closest part of the carrier. more
7/19/2012 12:47:51 PM
Curt Folding Aluminum Cargo Carrier Review - 2007 Honda Pilot- Video
Today we have 2007 Honda Pilot. Well be test fitting Curts 20 inch by 60 inch folding aluminum cargo carrier part number c18100. To mount this carrier to our vehicle well insert the shank of the carrier into the receiver tube of our hitch on the pilot. Well line up the hitch pin holes, feed our pin through and secure it with a clip. Now well go ahead and take a couple of clearance measurements. Weve got about one inch of clearance between the furthest part of our vehicle and the closest point of the carrier. more
7/19/2012 7:48:00 AM
