Diversi-Tech Adjustable Ball Mount Review - 2013 Chevrolet Tahoe- Video

Today on our 2013 Chevy Tahoe we will be test fitting the Diversi-Tech self-locking adjustable aluminum ball mount with two chrome balls with a six-inch drop and a seven-inch rise, right in at 10,000 pounds, part number DTALBM6600. Now before we begin our test fit, we will first need to obtain the hitch height of our vehicle, which is the measurement from the ground to the inside top of the receiver tube, and we get a measurement of 24 inches. Now to begin our test fit, in the drop position, we will slide the shake of the ball mount into the opening of the hitch, and turn the lock to engage the interlocking hitch pins on the inside of the ball mount. Now, as you can see, with using the key, you can adjust the length of the drop of the ball mount as well as switching it over to the other ball. We now can flip the ball mount over into the rise position and still see that the ball mount platform can be raised or lowered as well as flipping the ball mount over to use a different size ball. Now when choosing a ball mount for your trailer, you will first need to measure your trailers ride height. more

Watch Video

5/21/2013 11:35:34 AM

Andersen Rapid Hitch Ball Mount Review - 2013 Chevrolet Tahoe- Video

Today on our 2013 Chevy Tahoe we will be test fitting the rapid hitch adjustable aluminum ball mount gate with two chrome balls for the 5.5 inch drop, part number AM3410. Now before we begin our test fit, we will need to first obtain the hitch height of our vehicle, which is the measurement from the ground to the inside top of the receiver tube, and we get a measurement of 24 inches. Now to begin our test fit, in the drop position, we will slide the shake of the ball mount into the opening of the hitch, line up our pinholes, insert our pin through our pinholes, and secure the clip on either side. You can notice that in the drop position, we can pull the pin here to adjust to the different height of our ball. Well now flip the ball mount over into the rise position and using the same pin that we used to lower it in the draw position, we will pull that pin out to adjust the height of our ball platform. Now, when choosing the best ball mount for your trailer, you will need to measure your trailer ride height, which is the measurement from the ground to the bottom of the coupler when your trailer is level. more

Watch Video

5/21/2013 11:19:39 AM

Curt Multi-Ball Adjustable Ball Mount Review - 2013 Chevrolet Tahoe- Video

Today on our 2013 Chevy Tahoe we'll be test fitting the Curt Multi-Ball Adjustable Ball Mount for 2 Inch Hitches, part number d900. Now before we begin our test fit we'll first need to obtain the hitch height of our vehicle. This is the measurement from the ground to the inside top of the receiver tube and we'll get a measurement of 24 inches.Now to begin our test fit in the drop position we'll slide the shank of the ball mount into the opening of the hitch, line up our pin holes, insert our pin through our pin holes and secure the clip on the other side. Now with this ball mount you do have access to the three different size balls from the pin here. The ball platform can adjust up and down by the two pins here. We'll now flip the ball mount over into the rise position and as you can see we can still have access to the three different size balls as well as the ability to adjust the ball platform up and down with the two pins here. more

Watch Video

5/20/2013 3:34:13 PM

Convert-A-Ball Ball Mount with 8 Inch Drop Review - 2013 Chevrolet Tahoe- Video

Today on our 2013 Chevy Tahoe we'll be test fitting the Convert-A-Ball Cushion Ball Mount for 2 Inch Hitches with a 6-3/4 Inch Rise or 8 Inch Drop Rated at 10,000 Pounds, part number amsc8. Now before we begin our test fit we'll first need to obtain the hitch height of our vehicle. This is the measurement from the ground to the inside top of the receiver tube where we'll get a measurement of 24 inches.To begin our test fit, in the drop position we'll slide the shank of the ball mount into the opening of the hitch, insert our pin through our pin holes and secure the clip on the other side. We'll then measure from the ground to the top of the ball platform and we'll get a measurement of 16 inches. We'll then flip the ball mount over into the rise position and measure from the ground to the top of the ball platform and we'll get a measurement of 31 inches.When choosing a ball mount for your trailer youll first need to measure your trailer's ride height. This is the measurement from the ground to the bottom of the coupler when your trailer's level. more

Watch Video

5/20/2013 1:46:47 PM

Convert-A-Ball Ball Mount with 2 Inch Drop Review - 2013 Chevrolet Tahoe- Video

Today on our 2013 Chevy Tahoe well be test fitting the Convert-a-ball cushioned ball mount for 2-inch hitches with a 3/4-inch rise or a 2-inch drop rated at 10,000 pounds, part number amsc2. Now before we begin our test fit we will first need to obtain the hitch height of our vehicle which is the measurement from the ground to the inside top of the receiver tube, and we get a measurement of 24 inches. Now to begin our test fit in the drop position well slide the shank of the ball mount into the opening of the hitch, line up our pin holes, insert our pin through our pin holes, and secure it with the clip on the other side. Well now measure from the ground to the top of the ball platform and well get a measurement of 22 inches. Well then flip the ball mount over into the rise position and measure from the ground to the top of the ball platform, and well get a measurement of 25 inches. When choosing a ball mount you will first need to determine your trailers ride height which is the measurement from the ground to the bottom of the coupler. more

Watch Video

5/20/2013 1:45:48 PM

Draw-Tite Ball Mount Review - 2013 Chevrolet Tahoe- Video

Today on our 2013 Chevy Tahoe well be test fitting the Draw-Tite ball mount 3/4 inch rise or 2-inch drop rated at 6,000 pounds, part number 2923. Now before we begin our test fit, we will first need to obtain the hitch height of our vehicle. This is the measurement from the ground to the inside top of the receiver tube, and well get a measurement of 24 inches. Well now begin our test fit by installing the ball mount on to the vehicle. In the drop position, well slide the shank of the ball mount into the opening of the hitch, line up our pin holes, insert our pin, and secure with the clip on the other side. Well then measure from the ground to the top of the ball platform and well get a measurement of 22 inches. more

Watch Video

5/20/2013 12:57:25 PM

Curt Multi-Ball Adjustable Ball Mount Review - 2013 Chevrolet Silverado- Video

Today on our 2013 Chevrolet Silverado well be test fitting the Curt Multi-Ball adjustable ball mount for 2-inch hitches part number d900. Well begin by going ahead and getting our hitch height measurement. To get this measurement, you measure from the ground to the inside top edge of the receiver tube. We have a measurement of 19 1/4 inches. Now well go ahead and take our ball mount, slide the shank of our ball mount into our receive tube, line up the pin hole, and install our pin and clip. Well go ahead and mount it in the rise position first. more

Watch Video

5/3/2013 12:30:51 PM

Convert-A-Ball Heavy Duty Ball Mount with 2 Inch Drop Review - 2013 Chevrolet Silverado- Video

Today on our 2013 Chevrolet Silverado well be test fitting the cushioned ball mount for 2-inch hitches a 1-inch rise or a 2-inch drop rated at 14,000 pounds, part number amsc2hd. To begin we need to go ahead and get our hitch height. This is the measurement from the ground to the inside top edge of our receiver tube. Our hitch height for this vehicle is 19 1/4 inches. Now well go ahead and slide the ball mount shank into the receiver tube of our hitch, line up the hitch pin hole, and secure it with the pin and clip. First we begin in our drop position. more

Watch Video

5/3/2013 12:30:20 PM

Convert-A-Ball Ball Mount with 8 Inch Drop Review - 2013 Chevrolet Silverado- Video

Today on our 2013 Chevrolet Silverado well be test fitting the Convert-a-Ball cushioned ball mount for two-inch hitches with a 6 inch rise or 8 inch drop rated at 10,000 pounds, part number amsc8. Now to begin well go ahead and get our hitch height measurement. To do this well measure from the ground to the inside top edge of the receiver tube opening. Our hitch height for this vehicle is 19 1/4 inches. Keep in mind that your measurement can vary due to hitch styles, tire sizes, or any other accessory that may affect your vehicles ride height. Now we can go ahead and slide the shank of our ball mount into our hitch, line up the pin hole, and install our hitch pin and clip. more

Watch Video

4/24/2013 10:28:04 AM

Convert-A-Ball 6-Way Multi-Hitch Ball Mount Review - 2006 Chevrolet Silverado- Video

Today on our 2006 Chevrolet Silverado well be test fitting the Convert-A-Ball cushioned six way multi-hitch ball, part number CAB-6W for two inch hitches, rated at 10,000 pounds. To begin our test fit, well need to get our hitch height measurement. To do this well measure from the top of the receiver tube to the ground, which in this case measures 19 inches. Keep in mind that measurement can vary due to hitch style, tire size, or any other accessory that may affect your vehicles ride height, so its a good idea to measure yours. Were now ready to fit the ball mount to the vehicle. Well now slide the ball mount into the hitch, first using the two and five-sixteenths inch ball. more

Watch Video

1/15/2013 11:41:24 AM

Convert-A-Ball Ball Mount with 4 Inch Drop Review - 2006 Chevrolet Silverado- Video

Today on our 2006 Chevrolet Silverado well be test fitting the Convert-A-Ball cushioned ball mount for two inch hitches with two and three-quarter inch rise or four inch drop, rated at 10,000 pounds. To begin our test fit well need to get our hitch height measurement. To do this well measure from the top of the receiver tube opening to the ground. On this truck that measurement is 19 inches. Keep in mind that measurement can vary due to hitch style, tire size, or any other accessory that may affect your vehicles ride height, so its a good idea to measure yours. Well now slide the ball mount shank into the hitch, line up the hitch pin hole and install our hitch pin. more

Watch Video

1/15/2013 11:41:22 AM

Convert-A-Ball Ball Mount with 2 Inch Drop Review - 2006 Chevrolet Silverado- Video

Today on our 2006 Chevrolet Silverado well be test fitting the Convert-A-Ball cushioned ball mount for two inch hitches with three-quarter inch rise or two inch drop, rated at 10,000 pounds. Before we test fit out ball mount well first need to get our hitch height measurement. To do this well measure from the top of the receiver tube opening to the ground. On this truck that measurement is 19 inches. Keep in mind that measurement can vary due to hitch style, tire size, or any other accessory that may affect your vehicles ride height, so its a good idea to measure yours. Now that we have our hitch height measurement well go ahead and slide the ball mount shank into the hitch, line up the hitch pin hole and install our hitch pin. more

Watch Video

1/15/2013 11:41:02 AM

Convert-A-Ball Ball Mount with 8 Inch Drop Review - 2006 Chevrolet Silverado- Video

Today, on our 2006 Chevrolet Silverado, we'll be test-fitting the Convert-A-Ball cushion ball mount for 2-inch hitches for the 6 3/4-inch rise or 8-inch drop, rated at 10,000 pounds. Now, to begin, we'll need to get out hitch height measurement. To do this, we'll measure from the top of the receiver tube opening to the ground. On this truck that measurement is 19 inches. Now, keep in mind that measurement can vary due to hitch style, tire size, or any other accessory that may affect your vehicle's right height, so it's a good idea to measure yours. We'll now simply slide the shank of our ball mount into the hitch, line up the hitch pinhole and install our hitch pin. more

Watch Video

1/15/2013 7:59:40 AM

Convert-A-Ball Dual-Cushioned Adjustable Ball Mount Review - 2006 Chevrolet Silverado- Video

Today, on our 2006 Chevrolet Silverado, we'll be test fitting the Convert-A-Ball dual cushion adjustable ball mount with 7-inch rise or 9-inch drop, rated at 5,000 pounds, part number CAB-UM. Now, to begin our test fit, we'll need to get our hitch height measurement first. To do this, we'll measure from the top of the receiver tube opening to the ground. On this truck, that measurement is 19 inches. Now, keep in mind that measurement can vary due to hitch style, tire size, or any other accessory that may affect your vehicle's right height, so its a good idea to measure yours. We'll now slide the shank of the ball mount into the hitch, line up the hitch pinhole, and install our pin and clip securing our ball mount to the vehicle in the drop position. more

Watch Video

1/15/2013 7:58:41 AM

Draw-Tite Ball Mount Review - 2012 Chevrolet Colorado- Video

Today on this 2012 Chevrolet Colorado, were going to do a test fit of ball mount, part number 2923, from Draw Tite.Now, beginning our test fit, were going to get a measurement off the hitch on the vehicle for a frame of reference. Measuring from the top of receiver opening down to the ground will be about 14 inches. Well install the ball mount using a pin and clip.This ball mount is designed as a 2-inch drop starting from the top of the receiver opening down to the flat spot where the ball mounts on to will be 2 inches. Our measured drop actually comes out to 11-1/2 inches.Now, well take the ball mount and flip it over and check it in a rise position. It gives us a measurement about 14-1/2 inches. A couple other things to know that this ball mount is designed for 600 pounds tongue weight and 6,000 pounds gross towing weight. more

Watch Video

11/27/2012 7:50:34 AM

Convert-A-Ball Ball Mount with 4 Inch Drop Review - 2012 Chevrolet Colorado- Video

Today, on this 2012 Chevrolet Colorado, we are going to do a test fit of part number AMSC4, from Convert-a-ball. This is a cushion ball mount. Hey, a few things to know about this ball mount, that is designed for two-inch figure hitches only and it has a towing weight of 10,000 pounds and tongue weight of 2,000 pounds. To start off and give us a reference point, we'll go ahead and measure from top of reciever opening, down to the ground. In this case, it's going to be 14 inches. We'll go ahead and take the ball mount, and install it in drop position. more

Watch Video

11/27/2012 7:50:01 AM

Convert-A-Ball Ball Mount with 2 Inch Drop Review - 2012 Chevrolet Colorado- Video

Today, in this 2012 Chevrolet Colorado, were going to test fit the part number AMSC2 from Convert-A-Ball. Two things to know about this product is its designed for a 2-inch receiver hitch only and is rated for 10,000 pounds towing weight and 2,000 pounds tongue weight. This ball mount also has a polyurethane cushioning built into the inside to help take out some of the rattles and noise while towing.Well start off our test fit like in a frame of reference from our hitch. In this case this can be 14 inches in height. Were measuring from a top receiver opening down to the ground. Well go ahead and install the ball mount and secure it with a pinning clip.Now, a drop on this is about 2 inches. more

Watch Video

11/27/2012 7:49:35 AM

Convert-A-Ball Ball Mount with 4 Inch Drop Review - 2013 Chevrolet Silverado- Video

Today on our 2013 Chevrolet Silverado well be test fitting part number AMSC4. This is the Convert-A-Ball Cushion Ball Mount for two-inch hitches with a two and three-quarter inch rise for a four-inch drop, rated at 10,000 pounds. Before we begin our test fit, well first need to get our hitch height measurement. To do this, well measure from the top of the receiver tube to the ground. On this truck, that measurement is 18 inches. Now, keep in mind that measurement can vary due to hitch style, tire size or any other accessory that may change the vehicle ride height. more

Watch Video

10/15/2012 2:45:42 PM

Andersen Rapid Hitch Ball Mount Review - 2013 Chevrolet Silverado- Video

Today on our 2013 Chevrolet Silverado well be test fitting the Rapid Hitch Adjustable Aluminum Ball Mount Kit with two chrome balls, part number AM3410. Youll be able to tow up to 10,000 pounds with supreme safety and convenience of an adjustable five and a half inch drop, and six and a half inch rise. This kit includes a chrome plated steel ball combo for both two inch and two and five sixteenths inch balls. It will fit two inch by two inch receiver hitches. The aluminum alloy is strong yet lightweight and looks great, and will not rust. The ball mount adjusts in one inch increments up to five and a half inches drop and six and a half inches rise. more

Watch Video

10/15/2012 9:48:20 AM

Draw-Tite Ball Mount Review - 2013 Chervolet Silverado- Video

Today on our 2013 Chevrolet Silverado well be test fitting the Draw Tite Ball Mount, part number 2923. This will give you a three-quarter inch rise or a two inch drop and is rated at 6,000 pounds. To begin our test fit, well first do a measurement to give us out hitch height. To do this well measure from the ground to the top of the receiver tube opening. In this case, thats 18 inches. This measurement can vary due to tire size, style of hitch or any other accessory that may adjust the height of the vehicle. more

Watch Video

10/15/2012 9:47:07 AM

Roll-A-Hitch Cushioned Telescoping Swiveling Ball Mount Review - 2013 Chevrolet Silverado- Video

Today on our 2013 Chevrolet Silverado, well be test fitting Covert-A-Ball Roll-A-Hitch Cushioned Telescoping Swiveling ball mount in a 7-inch drop rated at 10,000lbs. This is part number CAB-LD6. Now if you have a lot of frustration over hard to reach hookups, this ball mount is the answer. Now it does have a 6-inch drop and has to be used in the drop position. Now before we begin our test fit, well need to know what our hitch height measurement is. To do this, well measure from the top of the receiver tube opening to the ground. more

Watch Video

10/12/2012 3:36:20 PM

Convert-A-Ball Dual-Cushioned Adjustable Ball Mount Review - 2013 Chevrolet Silverado- Video

Today on our 2013 Chevrolet Silverado, well be test fitting Covert-A-Ball Cushioned adjustable ball mount up to a 7-inch rise or down to a 9-inch drop rated at 5,000lbs. This is part number CAB-UM. Before we begin our test fit, well need to get a hitch height measurement. To do this, well measure from the top of the receiver tube opening to the ground. On this truck it measures 18 inches. Now keep in mind, that measurement can vary due to tire size, hitch style or any other accessory that may change vehicle right height. more

Watch Video

10/12/2012 3:35:57 PM

Convert-A-Ball Ball Mount with 2 Inch Drop Review - 2013 Chevrolet Silverado- Video

Today on our 2013 Chevrolet Silverado, well be test fitting Covert-A-Ball Cushioned ball mount for 2-inch hitches with a inch rise or 2-inch drop rated at 10,000lbs. This is part number AMSC2. To begin our test fit, well need to get a hitch height measurement. To do this, well measure from the top of the receiver tube to the ground. Now on this truck that measures 18 inches. Keep in mind, this measurement can vary due to tire size, hitch style or any other accessories that may change vehicle right height. more

Watch Video

10/12/2012 3:35:34 PM

Convert-A-Ball Cushioned Weight Distribution Shank Review - 2013 Chevrolet Silverado- Video

Today on our 2013 Chevrolet Silverado, well be test fitting Covert-A-Ball Cushioned weight distribution shank for 2-inch hitches part number AMAC1. This weight distribution shank helps to eliminate the push and pull feeling and clank often experienced when towing heavy trailers. The multiple attachment holes allow you to level your weight distribution head. This shank rated at 10,000lbs. This shank is also compatible with Convert-A-Ball accessories including the Pintle Hook combo with balls part number PH4, the ball mount adapter part number BA1 and the Clevis pin adapter part number CA1. The accessories attached with a 5/8-inch hitch pin. more

Watch Video

10/12/2012 3:34:55 PM

Draw-Tite Ball Mount Review - 2006 Chevrolet Silverado- Video

Today on our 2006 Chevy Silverado 1500 we'll be test fitting the Draw-Tite ball mount with a 3/4 inch rise or 2 inch drop rated at 6000 lbs, part number 2923. A tried and true design makes this makes this ball mount one of our most popular sellers. You'll notice the ball mount has an angle cut which will allow for the ball mount to slide into your hitch with ease. Now, the ball mount provides 8-1/2 inches of clearance from the center of the hitch pinhole to the center of the 1 inch shank. This will fit a 2 inch by 2 inch receiver and uses a ball with a 1 inch shank. From the top of the receiver tube to the ground on this truck is 17-3/4 inches. more

Watch Video

8/14/2012 3:05:43 PM

Andersen Rapid Hitch Ball Mount Review - 2006 Chevrolet Silverado- Video

Today on our 2006 Chevrolet Silverado 1500 we'll be test-fitting the Rapid Hitch Adustable Aluminum Ball Mount Kit with two chrome balls, part number AM3410. Now you'll be able to tow up to 10,000 pounds with supreme safety and the convenience of an adjustable 5 1/2 inch drop and 6 1/2 inch rise. This kit includes a chrome-plated steel ball combo for both 2 inch and 2 5/16 inch. It will fit 2 inch hitches. The aluminum alloy is strong yet lightweight and looks great and will not rust. The ball mount adjust in 1 inch increments up to 5 1/2 inch drop and 6 1/2 inch rise. more

Watch Video

8/14/2012 8:33:40 AM

  2