Trailer Brake Controller Installation - 2011 GMC Sierra- Video
Today on our 2011 GMC Sierra, we're going to install part number 90885 from Tekonsha. It's a Prodigy P2 Brake Controller. First thing we need to do is go ahead and locate the wire harness underneath the dash of the truck. Also, there's a small flag that helps identify the wires for it. It usually comes off the wire harness. In this case, it was stuck to a different wire harness but we pulled it out and away so you could see it. more
8/15/2014 4:25:22 PM
Trailer Brake Controller Installation - 2011 GMC Sierra 90195- Video
Today on our 2011 GMC Sierra we'll installing Tekonsha Prodigy P3 Brake Controller, Part Number 90195. To begin our install we'll first locate the manufacturer's brake control port wiring. Here on the driver's side in front of the fuse panel taped to the manufacturer's wiring will be the brake controller wiring. Now to access the brake controller port wiring, it'll usually be taped to the manufacturer's wiring so you can simply cut it free. Ours is not, so we'll just go ahead and pull it down. Now, go ahead and straighten it out and then cut each wire to the same length stripping back the wires. Now, with the manufacturer's wiring prepared we'll go ahead and add the butt connectors as necessary. more
6/27/2014 1:49:41 PM
