Wiring Installation And Review Videos

This Old Trailer: Finding and Fixing a Broken Wire Part 2- Video

Next we are going to go to less obvious stuff. Say for instance you have got your ground wire hooked back up to the frame and weird stuff happening out back. We will have to dig into the wire itself a little bit. In this case basically you want to check your wiring connection. You have a wiring connection right here that could be a potential problem right there. Chances are whatever fitting you used to put the wiring together might come loose. And also we have something kind of obvious too. The wire here has a little bit of road rash on it. You can see the bare wires on the inside. Even though it may still be making contact eventually this wire here will corrode up inside there and it will just lose contact so we are basically going to have a broken wire eventually. Lets go ahead and take this apart here we will see what we have got on the inside. 01:14 more

12/2/2009 3:28:16 AM

Cleaning Weld Nuts for Trailer Hitch Installation- Video

Okay as you can see here on the drivers side, our weld nut has a lot of corrosion built up in there. And when we try to install our 10 millimeter bolt is not wanting to start at all, in fact it almost seems like the bolt is too big for the weld nut. It is a common misconception, again when the weld nuts got a lot of build up in there. more

8/24/2009 11:41:54 PM