bing tracking image

2012 Acura RDX Trailer Hitch Installation And Review Videos

     

Trailer Hitch Installation - 2012 Acura RDX - Curt- Video

Trailer Hitch Installation - 2012 Acura RDX - Curt

Today on our 2012 Acura RDX, well be installing Curt Hitch, part number C13154. Before we start our installation, here are a few measurements that will assist you when selecting accessories, such as a draw bar, a bike rack or a cargo carrier. From the center of the hitch pinhole to the outermost part of the bumper is 5 inches, and from the top of the reciver tube to the ground is 12 inches. Now, lets go ahead with our install. Now, to begin our installation, well go ahead and point out the connection points on the frame of the vehicle. On the passenger side at the rearmost point is a weld nut, here, and well be using this hole here for our frontmost attachment. more


Watch Video

8/21/2012 4:12:51 PM



Trailer Hitch Installation - 2012 Acura RDX - Hidden Hitch- Video

Trailer Hitch Installation - 2012 Acura RDX - Hidden Hitch

Today on our 2012 Acura RDX, well be installing Hidden Hitch, part number 87584. Now, before we start our installation, here are some measurements to help in selecting accessories, such as a draw bar, a bike rack, or a cargo carrier. From the center of the hitch pinhole to the outermost part of the bumper is 4 inches, and from the top of the receiver tube to the ground is 12 inches. Now, lets go ahead with our install. To begin our installation, well go ahead and point out the connection points on the frame of the vehicle. On the passenger side, at the rearmost point, is a weld nut, here, and well be using this hole here for our frontmost attachment. more


Watch Video

8/21/2012 4:12:16 PM



Trailer Hitch Installation - 2012 Acura RDX - Draw-Tite- Video

Trailer Hitch Installation - 2012 Acura RDX - Draw-Tite

Today on our 2012 Acura RDX, well be installing Draw-Tite Hitch, part number 75692. Now, before we start our installation, here are some measurements to help you in selecting accessories such as a draw bar, a bike rack, or a cargo carrier. From the center of the hitch pinhole to the outermost part of the bumper is 4 inches, and from the top of the receiver tube to the ground is 12 inches. Now, lets go ahead with our install. To begin in our installation, well go ahead and point out the connection points on the frame of the vehicle. On the passenger side, at the rear most point, is a weld nut here, and well be using this hole here for our frontmost attachment. more


Watch Video

8/21/2012 4:11:40 PM



  1