Hopkins Plug-In Vehicle Wiring Harness Installation - 2015 Hyundai Santa Fe- Video
Clayton: Hello everybody, Clayton here at etrailer.com. Here at etrailer.com we install, test and review a lot of different products. To appease the customer and make a more educated decision before your purchase. Today, we're going to be working on a 2015 Hyundai Santa Fe. We're going to be taking a look at, and I'll show you how to install the Hopkins Plug-In Simple 4-Pole Wiring Kit. Our 4-pole is going to be essential to getting our lighting functions to our trailer or even our cargo carriers. more
11/30/2020 11:02:11 AM
Curt T-Connector Vehicle Wiring Harness Installation - 2015 Hyundai Santa Fe- Video
Speaker 1: Today, on our 2015 Hyundai Santa Fe, we're going to be taking a look at, and showing you how to install, the Curt T-Connector vehicle wiring harness for factory tow package with a 4-pole flat trailer connector. And that's going to be part number C56332.So, here's what our wiring is going to look like, once we have it installed. It is designed to stay on the outside of the vehicle at all times and it is going to provide us a 4-pole flat trailer connector, giving us all the required lights to get down the road safely, like our tail lights, turn signals, and our brake lights.The dust cover's going to keep all the moisture and debris out and also whenever we're not towing, we just hook it to the safe chain loop and it'll be ready for us whenever we hook up. As far as the installation goes, we're not going to have to cut or splice indoor wiring at all. There's going to be a couple connectors underneath the bumper that are going to be already there from the factory that we'll plug directly into. Then we'll just put a 10 amp fuse in place in the inline fuse holder and we're ready to go. more
6/12/2018 12:23:11 PM
Best 2015 Hyundai Santa Fe Trailer Wiring Options- Video
Speaker 1: Today we're going to be taking a look at the best custom fit vehicle wiring for your 2015 Hyundai Santa Fe. You're going to have either a factory tow package or a non-factory package. We're going to have three options for each one. Today I'm going to help you determine which one you're going to need. On your driver side behind your rear tire there's going to be a plastic panel. You're going to want to pull that panel down and you're going to look for two plugs on your frame rail. more
2/14/2018 5:23:55 PM
Trailer Wiring Harness Installation - 2015 Hyundai Santa Fe- Video
Today on our 2015 Hyundai Santa Fe, we're going to show you how to install the Curt T-Connector Wiring Harness with the four fold flat trailer connector, Part number C-5-6-1-8-4. Now we're going to begin by clearing out the rear cargo area, here. Just want to kind of, get the stuff up and out of the way. Now, with that cleared out, let's pull the little caps off of our bolt covers, then we'll remove the bolts underneath. We'll pull up on our cargo compartment and just set that out of the way. Now it's time to just, kind of, pull up on our threshold here. Pop that up all the way across. more
8/11/2015 11:42:18 AM
Trailer Wiring Harness Installation - 2015 Hyundai Santa Fe c56151- Video
Today, in our 2015 Hyundai Santa Fe we're going to review and install the Curt Custom Fit 4 Pole Trailer Connector and Wiring Harness, part number C56151. This will be on our Santa Fe, with a sport model and manufactured install tow package. Here's what our 4 flat connector's going to look like once it's installed. Our wiring harness comes with a nice cap to secure it here to the hitch, and our 4 flat conncetor is most commonly used for trailer towing and accessories. With this being a custom fit wiring harness, it's simple and easy to install, and easy to use. Let's go ahead and show you how to install it. more
8/8/2015 4:09:49 PM
Trailer Wiring Harness Installation - 2015 Hyundai Santa Fe 118269- Video
Today on our 2015 Hyundai Santa Fe we're going to review and install the Tow Rated Custom Fit Vehicle Wiring Harness part number 118269 for vehicles equipped with a factory tow package. Here's what our four flat connector's going to look like once installed. Next we're going to go ahead and test it. Using a test light, take our ground clamp and put it on the white wire terminal which would be the ground circuit for our four flag connector. Then testing the next terminal over will be the brown wire for our running light circuit, and then the yellow wired terminal will be the driver's side turn signal and brake. Our green wired terminal will be the passenger's side turn signal and brake. Now we know our four flat connector works, we're ready to hit the road. more
8/8/2015 4:09:35 PM
