Best 2011 Ford Escape Trailer Wiring Options- Video
Today we'll be taking a look at the best trailer wiring options for your 2011 Ford Escape. The first one we'll be taking a look at today is the Te-can-tra 00:00:08 T1 connector wiring harness for Ford Escapes without factory tow package, part number 118551. The second one we'll be taking a look at today is the Tecantra T1 connector wiring harness for Ford Escapes with factory tow package, part number 118251. Both of them are gonna come with everything you need to get them installed. As you can see, the ne designed for Ford Escapes with tow package is gonna be a lot less complicated than the one designed without tow package. With that being said, they're both still relatively easy to get installed. If you have a factory tow package, this connector here is going to plug directly in to your tow port here on the driver's side of the rear. Then, you can just route your four-pole wiring wherever you'd like it, and then you're all set! This Ford Escape does not have a factory tow package, so it's a little more complicated, but not too bad. more
10/14/2016 11:56:12 AM
Trailer Wiring Harness Installation - 2011 Ford Escape- Video
Today on this 2011 Ford Escape were going to install part number C56160 from Curt. First thing we want to do is open up the hatch and remove the two tail light assemblies. To remove the tail light assembly from the wiring harness there will be a small tab that we push and then we can pull the connectors apart. Now I have the drivers side tail light removed well repeat the same process over on the passengers side. Well go ahead and take the four pole wire and run that between the bumper cover and the body and out below it. Well also do the same thing with the T connector with the green wire. more
12/26/2012 10:02:52 AM
Trailer Wiring Harness Installation - 2011 Ford Escape 56067- Video
Today on this 2011 Ford Escape were going to install part #: 56067 from Curt. First thing we need to do is open up the back hatch and remove the two taillight assemblies. And to remove the harness were going to push down this tab right here, helps a little bit to push in first and then push the button, it comes right apart. Do the same thing for the lower socket here. Okay, thats it for the driver side, well do one more time on the passenger side. Well take our 4 pole wire harness, well drop it down behind the bumper and out the bottom. more
3/14/2012 7:50:56 AM
