Best 2016 Chrysler Town And Country Trailer Wiring Options- Video
Hello, everybody, Clayton here at etrailer.com. And today we're going to be taking a look at the best trailer wiring options for your 2016 Chrysler Town and Country. As you can see here we have three different options for you to look at. We have one from Tekonsha, one from Curt and one from Hopkins. Now we're ready to look at some of the differences between our kits here. Starting off with our Hopkins, there's not going to be any gel coating to protect the inside of our module. more
3/17/2021 1:29:21 PM
Curt Wiring Harness Installation - 2016 Chrysler Town and Country- Video
Today on our 2016 Chrysler Town & Country, you're going to be taking a look at, and I'm going to show you how to install the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector. This is what our wiring looks like when it's installed. This is going to give us all the proper lighting functions to safely tow our trailer: both turn signals, our brake lights, and our running lights. We're going to have a nice attached dust cap that's going to help protect our connections from any dirt and debris when not in use. The dust cap can also second as a holder when not in use. It's going to help keep our wiring from dragging the ground.It's going to give us three amps per circuit for stop and turn signal, six amps per circuit for our tail lights. more
3/18/2019 5:27:11 PM
Trailer Wiring Harness Installation - 2016 Chrysler Town and Country- Video
Today on our 2016 Chrysler Town & Country, we're going to be taking a look at and installing the Tekonsha T-One vehicle wiring harness with 4-pole flat trailer connector - part number 118534. Here's what our wiring is going to look like when installed on the vehicle. This wiring harness is going to work very well for all of your applications that are gonna need to connect to a 4-pole harness. It has a power module box which is gonna help give you plenty of power here, but it's also gonna help to separate this system from the vehicle's electrical system. So that way you don't risk the same type of damage you would if you just wired in directly. It also has T-connectors that go into the factory connections at the rear of the taillights, which are gonna make it easier for installation. Now, let's go ahead and show you how to install this wiring. Here's everything that's gonna come with our kit. more
12/9/2016 11:49:41 AM
Trailer Wiring Harness Installation - 2016 Chrysler Town and Country C56150- Video
Today on this 2016 Chrysler Town and Country we're going to review and install Curt T-Connector Vehicle wiring harness with a 4-pull flat trailer connector, part number C56150. All right, this is what our wire harness looks like when it's installed on our van. Of course, there's not much to see right here but here's our 4-pull slat right here with the included cap. Now a good application for this would be any small trailer that has 2 or 4 running lights on the side of the trailer and a couple of tail lights in the back. That would be more than adequate for this type of system that we have on our van here. Now our part here is also good for insulating the wire harness from your trailer to your vehicle to minimize any damage as well. The installation onto a factory wire harness, where needed, does not require any splicing due to it's built in t-connectors. This does require a power ramp and a battery for a 12 volt supply and that's how it get's it's power to run the trailer. more
7/18/2016 5:27:32 PM
