Hopkins Endurance Fifth Wheel Wiring Harness Installation - 2004 Chevrolet Silverado- Video
Today on our 2004 Chevrolet Silverado 3500, we'll be installing the Hopkins Endurance 5th Wheel/Gooseneck 90-Degree Wiring Harness, Part Number 41157. Now, to begin our install, we're going to our 7-pole, supplied with the install kit, and mount it here in the pickup bed on the driver's side, behind the wheel well, in front of the tailgate. This will give us easy access. To mount it in the pickup bed side, we're going to go ahead and drill through the bed liner, through the sheet metal, and then mount it using the self-tapping screws provided with the install kit. Now, we need to make a hole large enough for the back of the 7-pole socket, so we're going to drill out a 2-1/8 inch hole as per the instructions. Now with the hole drilled out, we need to take the 7-pole connector that matches the back of our 7-pole socket, and feed it from underneath, up and out through our cut out hole. Then, we'll go ahead and take the 7-pole connector, attach the wiring harness, and mount it to the pickup bed side. Now, I'm going to go ahead and feed the 7-pole over the frame and then up through our hole. more
2/24/2015 12:14:09 PM
Trailer Connector Socket Installation - 2004 Chevrolet Silverado- Video
Today on our 2004 Chevrolet Silverado, were going to install part number HM40975 from Hopkins. Well start off our install by installing the bracket onto the bumper of the truck. We can provide a hardware to attach it. Then well go ahead and take the factory wire harness on the vehicle and plug it into the back side of the connector. Once everything is plugged together, well take the connector and snap it into the bracket, and then were finished. And there you have for our part number HM40975 from Hopkins.. more
6/14/2012 1:16:56 PM
