Softride Dura Parallelogram Hitch Bike Racks Review - 2008 Subaru Outback Wagon- Video
Today on our 2008 Subaru Outback Wagon, we're going to be doing a test fit on the Softride Dura Parallelogram. This is a tilting style 4-bike rack. It's been designed for use with inch and a quarter or a two inch hitches. The part number on it is SR26247. As you can see with this rack design, we've got two threaded holes here on the passenger side. Just so as for reference as I'm taking measurements, I'm going to be installing the bolt in the first hole. To begin our test fit, we're going to slide the shank of the rack into the receiver tube of our hitch here. more
9/16/2014 2:30:15 PM
Saris Bike Porter Hitch Bike Racks Review - 2008 Subaru Outback Wagon- Video
Today on our 2008 Subaru Outback Wagon we're going to do a test fit on the Saris Bike Porter. This is a folding and tilting four bike rack. They've designed it so you can use it with inch and a quarter or two inch hitches. The part number on it is SA404B. You can also get this in a two bike configuration. That part number is SA402B. more
9/16/2014 2:28:47 PM
Kuat NV Hitch Bike Racks Review - 2008 Subaru Outback Wagon- Video
Today on our 2008 Subaru Outback we're going to do a test fit on the Kuat NV. Now this is a 4-bike platform-style rack. They've designed it for use with 2" hitches. The part number on it is N105-107 in the black and chrome that you see here. If you prefer, we do have it in a gun metal gray an orange also; that part number is N101-103. Now to begin our test fit we slide the shank of the rack right into the receiver tube of our hitch. As we do this we'll line up our pinhole with our hitch pinhole. more
9/16/2014 1:12:16 PM
Yakima FullTilt Hitch Bike Racks Review - 2015 Subaru Forester- Video
Today on our 2015 Subaru Forester we're going to do a test fit of the Yakima FullTilt. This is a folding and tilting four bike rack. It's been designed for use with inch and quarter or two inch hitches. Part Number on it Y02462. If you need an extra cradle set we do have this available in a five bike that Part Number is Y02463. To begin our test fit we'll slide the shank of the rack right into the receiver tube of our hitch. We'll need to slide it in far enough so that the small silver pin appears on our hitch pin hole. more
8/15/2014 11:26:10 AM
Thule Helium Aero Hitch Bike Racks Review - 2015 Subaru Forester- Video
Rate your transcript OrderClientKevin BrossRef #20593Order #TC0999573265 Today on our 2015 Subaru Forester, we are going to do a test fit on the Thule Helium Aero. This is a folding and tilting two bike rack. It has been designed for use with inch and a quarter or two inch hitches. The part number is TH9042. Now this is also available on a three bike configuration. That part number is TH9043. To begin our test fit we'll hold out on the black attach pin located on the right side or passenger side of our rack. more
8/15/2014 11:12:44 AM
Swagman Titan Hitch Bike Racks Review - 2015 Subaru Forester- Video
Rate your transcript OrderClientKevin BrossRef #20587Order #TC0749278147 Today on our 2015 Suburu Forester we're going to do a test fit on the Swagman Titan. This is a folding and tilting four bike rack. They've designed it for use with inch and a quarter to two inch hitches. Part number on it is S63410. Now to begin our test fit we need to slide the shank of the rack right into the receiver tube of our hitch. As we do this, we want to line up our pin hole with our hitch pin hole. We'll then thread in our anti-rattle bolt. more
8/15/2014 10:48:16 AM
Softride Element Parallelogram Hitch Bike Racks Review - 2015 Subaru Forester- Video
Today on our 2015 Subaru Forester, we're going to do a test fit on the Softride Element Parallelogram. This is a folding and tilting four bike rack. It's been designed for use with inch and a quarter and 2 inch hitches. Part number on it is SR26248. To begin our test fit, we'll slide the shank of the rack right into the receiver tube of our hitch. We'll need to slide it in far enough so our threaded hole ends up with our hitch pin hole. We'll then take our anti-rattle bolt, which is provided; thread it in. more
8/14/2014 4:16:23 PM
Softride Dura Parallelogram Hitch Bike Racks Review - 2015 Subaru Forester- Video
Today on our 2015 Subaru Forester, we're going to do a test fit on the Softride Dura Parallelogram. This is a tilting 4-bike rack. It's been designed for use with inch and a quarter and 2 inch hitches. The part number is SR26247. To begin our test fit, we need to slide the shank of the rack into the receiver tube of our hitch. As we do, we've got 2 holes to choose from here on the side of the shank. I'm going to slide it in and use the hole that's the closest to the end of the shank. more
8/14/2014 4:13:46 PM
Saris Freedom SuperClamp Hitch Bike Racks Review - 2015 Subaru Forester- Video
Today on our 2015 Subaru Forester, we're going to do a test-fit on a Saris Freedom SuperClamp. This 2 bike platform-style rack has been designed for use an inch and a quarter or two inch hitches. Part number on it is SA4025. To begin our test-fit we need to slide the shank of the rack into the receiver tube of our hitch. As we do, we want to line up our threaded hole with our hitch pin hole. We could then slide in our anti-rattle bolt and thread it in. We should thread it in from the driver to the passenger side. more
8/14/2014 4:11:44 PM
Saris Freedom Hitch Bike Racks Review - 2015 Subaru Forester- Video
Today on our 2015 Subaru Forester, we're going to do a test fit on the Saris Freedom. This is a folding and tilting 4-bike rack. It's been designed for use in 2 inch hitches. Its part number is SA4414B. To begin our test fit, we need to slide the shank of the rack right into the receiver tube of our hitch. As we slide it in, we want to line up our threaded hole with our hitch pin hole. Once we have those in line, we're going to take our anti-rattle bolt, slide it in and start threading it in by hand. more
8/14/2014 4:09:02 PM
Saris Bike Porter Hitch Bike Racks Review - 2015 Subaru Forester- Video
Today on our 2015 Subaru Forester, we're going to do a test fit on the Saris Bike Porter. This is a folding and tilting 4-bike rack. It's been designed for use with 1-1/4 or 2-inch hitches. Part number on it is SA404B. We also have this available in a 2-bike configuration. That part number is SA4042B. more
8/14/2014 4:07:08 PM
Saris Axis Hitch Bike Racks Review - 2015 Subaru Forester- Video
Today on our 2015 Subaru Forester, were going to do a test-fit on the Saris Axis. This is a folding and titling three-bike rack. Its been designed for use with 1 or 2-inch hitches, part number SA843B.To begin our test-fit, well slide the shank of the rack right into the receiver tube of our hitch. We need to slide it in far enough, so that the threaded hole lines up with our hitch pinhole. We can then slide in our anti-rattle bolt. Well do that from the left to the right hand side, and well begin tightening it down by hand.Once we have it hand-tight here, as you can see, we still got quite a bit of movement and play on the rack, so well take our wrench. more
8/14/2014 4:04:12 PM
Kuat NV Hitch Bike Racks Review - 2015 Subaru Forester- Video
Today on our 2015 Subaru Forester, were going to do a test fit on the Kuat NV. This is a 4-bike platform style rack. It is folding and tilting by design. Part number on it is N105-107 for the black and chrome as we have here. Its also in a gun metal gray and orange. That part number is N101-103. more
8/14/2014 3:33:58 PM
Hollywood Racks Traveler Tow n Go Hitch Bike Racks Review - 2015 Subaru Forester- Video
Today on our 2015 Subaru Forester we're going to do a test fit on the Hollywood Racks Traveler Two and Go. This is three-bike rack designed to mount on 2-inch ball mounts. Part number on it is HR135. Now we've mounted it on our hidden hitch extra long shank ball amount. Part number on that is 80232. The shank and ball are sold separately. You can check that out on our website if you need to pick one up. more
8/14/2014 2:59:28 PM
Hollywood Racks Traveler Hitch Bike Racks Review - 2015 Subaru Forester HR8500- Video
Today on our 2015 Subaru Outback, we are going to be a test fit on the Hollywood Racks Traveler this is a tilting and folding four bike rack. Been designed for use inch an a quarter or two inch hitches. The part number on it is HR8500. Now this is also available on a three bike configuration. That part number is HR6500. To begin our test fit, we are going to slide the shank of the rack right under the receiver tube of our hitch. As we do, we need to slide it far enough so our threaded hole lines up with our hitch pinhole. more
8/14/2014 2:57:39 PM
Saris Freedom SuperClamp Hitch Bike Racks Review - 2010 Subaru Forester- Video
Today on our 2010 Subaru Forester we're going to be test fitting the Saris Freedom Superclamp. This is a platform-style 2-bike rack. It's designed for use with both 1-1/4" and 2" hitches. Its part number is SA4025. Now to begin our test fit we're going to slide the shank of our rack right into the receiver tube of our hitch. As we slide it in we want to line the threaded hole up with our hitch pinhole. more
7/24/2014 9:06:15 AM
Softride Element Hitch Mounted Bike Rack Review - 2014 Subaru Outback Wagon- Video
Today on our 2014 Subaru Outback we're going to be test fitting the Softride Element Parallelogram. This is a tilting 4-bike rack. It's designed for use in 2" hitches. Its part number is SR26248. To begin our test fit we need to slide the shank of the rack into the receiver tube of our hitch. As we do this we need to line up one of the two threaded holes that we have here on the passenger side. more
7/18/2014 2:42:47 PM
Softride Dura Parallelogram Hitch Bike Racks Review - 2010 Subaru Forester- Video
Today on our 2010 Subaru Forester we're going to be test fitting the Softride Dura Parallelogram. This is a tilting-style 4-bike rack. It's designed for use in 2" hitches. Its part number is SR26247. Now to begin our test fit we'll slide the shank of the rack right into the receiver tube of our hitch. Now as we do this we'll want to keep an eye through our pinhole to see when our threaded hole lines up. more
7/18/2014 1:39:03 PM
Yakima FullTilt Hitch Bike Racks Review - 2010 Subaru Forester- Video
Today on our 2010 Subaru Forester we're going to be test fitting the Yakima FullTilt. This is a folding and tilting 4-bike rack. It's designed for use in both 1-1/4" and 2" hitches. Its part number is Y02462. Now to begin our test fit we'll slide the shank of the rack right into the receiver tube of our hitch. As we do this we'll want to push it in far enough to where the pin comes out into our hitch pinhole. more
7/16/2014 5:24:01 PM
Thule Vertex Hitch Bike Racks Review - 2014 Subaru Outback Wagon- Video
Today on our 2014 Subaru Outback, we are going to be test-fitting Thule Vertex. This is a folding and tilting 4 bike rack. It's been designed for use with both the inch and a quarter and the two inch hitches. It's part number is Th-9029. To begin our test fit, we are going to slide the shank of the rack right into the receiver tube of our hitch. As we slide it in, we want to line up the threaded hole with out hitch pinhole. We are going to take our anti-rattle bolt and we'll thread that in. Once we have it hand-tight, we'll finish it off with a wrench. As you can see, with our anti-rattle bolt tight, it's going to take play out of the connection point there. Now, we'll go a set of measurements. more
7/14/2014 7:09:55 PM
Thule Hitching Post Pro Hitch Bike Racks Review - 2014 Subaru Outback Wagon- Video
Today on our 2014 Subaru Outback we're going to be test fitting the Thule Hitching Post Pro. This is a folding and tilting 4-bike rack. It's been designed for use with the 1-1/4" or 2" style of hitch. Its part number is TH934XTR. Now to begin our test fit we're going to slide the shank of the rack right into the receiver tube of our hitch. As we slide this in we want to line up the threaded hole with the hitch pinhole, then take our anti-rattle bolt and thread it in. more
7/14/2014 7:03:37 PM
Thule Helium Aero Hitch Bike Racks Review - 2014 Subaru Outback Wagon- Video
Today on our 2014 Subaru we're going to be test fitting the Thule Helium Aero. This is a folding and tilting 2-bike-style rack. It's designed for use in 1-1/4" and 2" hitches. Its part number is TH9042. Now to begin our test fit we're going to slide the shank of the rack right into the receiver tube of our hitch. As we slide it in we're going to hold out on the black attached pin that's here on the right and guide it in so it falls into our pinhole on our rack. more
7/14/2014 6:58:49 PM
Softride Dura Parallelogram Hitch Bike Racks Review - 2014 Subaru Outback Wagon- Video
Today on our 2014 Subaru Outback we're going to be test fitting the Softride Dura Parallelogram. This is a tilting-style 4-bike rack. Its part number is SR26247. To begin our test fit we need to slide the shank of the rack right into the receiver tube of our hitch. Over here on the passenger side we've got two threaded holes: one here and then one in just a little bit further. I'm going to use that first one to give us as much clearance room as we can. more
7/14/2014 6:45:50 PM
Saris Freedom SuperClamp Hitch Bike Racks Review - 2014 Subaru Outback Wagon- Video
Today on our 2014 Subaru Outback, were going to be test fitting the Saris Freedom SuperClamp. This is a platform style two bike rack. Its designed for use in both the 1-1/4 and 2 inch hitches. Its part number is SA4025. To begin our test fit, well slide the shank of the rack right into the receiver tube of our hitch. Well slide it in far enough so that the threaded hole lines up with the hitch pin hole. more
7/14/2014 6:44:12 PM
Swagman Titan Hitch Bike Racks Review - 2010 Subaru Forester- Video
Today on our 2010 Subaru Forester we're going to be test fitting the Swagman Titan. This is a tilting and a folding 4-bike rack. It's designed for use in 1-1/4" and 2" hitches. Its part number is S63410. To begin our test fit we're going to slide the shank of the rack into the receiver tube of our hitch. As we do this we want to be sure that we get the threaded hole lined up with our hitch pinhole. more
7/14/2014 1:42:27 PM
Saris Axis Hitch Bike Racks Review - 2010 Subaru Forester sa843b- Video
Today on our 2010 Subaru Forester we're going to be test fitting the Saris Axis. This is a folding and tilting 3-bike rack. It's designed for use in both 1-1/4" and 2" hitches. Its part number is SA843B. We're going to begin our test fit by sliding the shank of the rack right into the receiver tube of our hitch. We'll slide it far enough so that our threaded hole lines up with our hitch pinhole. more
7/14/2014 1:37:42 PM
Saris Thelma 3 Bike Rack Review - 2013 Subaru Outback Wagon- Video
Today on our 2013 Subaru Outback we're going to be test fitting the Saris Thelma. This is a tilting 3-bike rack platform-style. It's designed for use in 1-1/4" and 2" hitches. Its part number is SA4239B. Now to begin our test fit we're going to slide the shank of the rack into the receiver tube of our hitch. As we do this we want to keep an eye on the threaded hole to see when it lines up with the pinhole in our hitch tube. more
7/14/2014 5:48:07 AM
Thule Helium Aero Hitch Bike Rack Review - 2013 Subaru Outback Wagon- Video
Today on our 2013 Subaru Outback we're going to be test fitting the Thule Helium Aero. This is a folding and tilting 2-bike rack that's designed for use in both the 1-1/4" and 2" style of hitch. Its part number is TH9042. Now to begin our test fit we're going to slide the shank of the rack right into the receiver tube of our hitch. As we do we need to hold onto the black attached pin, slide it in so our pinholes line up, and allow that pin to go right into the hole. We'll then turn the black knob here; this is going to engage the anti-rattle device further securing our rack to our vehicle. more
7/9/2014 8:45:07 AM
Yakima FullTilt 4 Bike Rack Review - 2013 Subaru Outback Wagon- Video
Today on our 2013 Subaru Outback, we're going to be test fitting the Yakima Full Tilt. This is a folding and tilting 4 bike rack. It's designed for use in both the 1 1/4 and 2 inch hitches. It's part number is Y02462. To begin our test fit, we need to slide the shank of the rack right into the receiver tube of our hitch. As we slide it in, we'll want to watch through the pin hole for the small silver tab to appear. I like then to pull back on it to give us as much clearance as possible. more
7/9/2014 8:44:34 AM
Saris Freedom Hitch Bike Racks Review - 2013 Subaru Outback Wagon- Video
Today, on our 2013 Subaru Outback, we're going to be test fitting the Saris Freedom. This is a platform style, tilting and folding 4 bike rack. It's designed for use in 2 inch hitches. It's Part Number SA4414B. Now to begin our test fit, we need to slide the shank of the rack right into the receiver tube our hitch. As we do this, we want to keep an eye through the pin hole and the side of our hitch to see when the threaded hole lines up with. With our holes lined up, we'll take our anti rattle bolt. more
7/9/2014 3:42:08 AM
Saris Freedom SuperClamp 2 Bike Rack Review - 2013 Subaru Outback Wagon- Video
Today on our 2013 Subaru Outback we're going to be test fitting the Saris Freedom SuperClamp. This is a two-bike platform style rack. It's Part Number is SA4025. To begin our test fit we're going to slide the shank of the rack right into the receiver tube of our hitch. We'll slide it in far enough so our threaded hole lines up with our hitch pin hole. We can then thread in our anti rattle bolt and we'll run that down hand tight, and we'll use our wrench to finish it off. We can then use the provided lock from Saris, clip it on the other side to secure it. We're going to have about 11 and a half inches worth of ground clearance here at the base of the shank and about 18 and a half here at the rear of the rack. more
7/8/2014 11:44:50 AM
Softride Element Hitch Mounted Bike Rack Review - 2013 Subaru Outback Wagon- Video
Today on our 2013 Subaru Outback, we're going to be test fitting the Softride Element Parallelogram. This is a folding and tilting 4 bike rack. It's designed for use in the 2 inch hitches, it's part number is SR26248. To begin our test fit, we'll slide the shank of the rack into the receiver tube of our hitch. As we do this, we want to line one of our threaded holes up with our hitch pin hole. I'm going to line up the first one to give us as much clearance room as possible. We can then take our anti-rattle bolt and thread that in. more
7/8/2014 10:55:32 AM
Softride Dura Hitch Bike Rack Review - 2013 Subaru Outback Wagon- Video
Today on our 2013 Subaru Outback, we're going to be test fitting the Softride Dura Parallelogram. This is a tilt away style 4 bike rack. It's designed for use in 2" hitches. Its part number is SR26247. To begin our test fit, we'll slide the shank of the rack right into the receiver tube of our hitch. As we do this, we're going to want to line up one of the sets of holes that we have. We're going to be using the furthest one, or the one closest to the car, just so we have as much clearance room as possible. more
7/8/2014 10:43:33 AM
Saris Axis 3 Bike Rack Review - 2013 Subaru Outback Wagon- Video
Today on our 2013 Subaru Outback we're going to be test fitting the Saris Axis. This is a folding and tilting 3-bike rack. It's designed for use in 1-1/4" and 2" hitches. Its part number is SA843B. Now to begin our test fit we're going to slide the shank of the rack right into the receiver tube of our hitch. We'll slide it in far enough so the threaded hole lines up with our hitch pinhole. more
7/7/2014 11:04:29 AM
Yakima FullTilt 4 Bike Rack Review - 2014 Subaru Outback Wagon- Video
Today on our 2014 Subaru Outback we're going to be test fitting the Yakima FullTilt. This is a folding and tilting 4-bike rack. They've designed it so we can use it in both the 1-1/4" and 2" hitches. Its part number is Y02462. Now to begin our test fit we need to slide the shank of the rack right into the receiver tube of our hitch. As we slide it in we want the small attached pin to go into the pinhole in our rack. more
6/27/2014 1:50:12 PM
Saris Axis 3 Bike Rack Review - 2014 Subaru Outback Wagon- Video
Today on our 2014 Subaru Outback we're going to be test fitting the Saris Axis. This is a folding and tilting 3-bike rack. They've designed it for use in the 1-1/4" and 2" hitches. Its part number is SA843B. To begin our test fit we need to slide the shank of the rack into the receiver tube of our hitch far enough so our threaded hole lines up with the pinhole. We'll then slide in our anti-rattle bolt and tighten it down hand tight. more
6/26/2014 4:43:47 PM
Swagman Titan Hitch Bike Rack Review - 2014 Subaru Outback Wagon- Video
Today on our 2014 Subaru Outback we're going to be test fitting the Swagman Titan. This is a folding and tilting 4-bike rack. They've designed it so you can use it in both the 1-1/4" and 2" hitches. Its part number is S63410. Now to begin our test fit we're going to slide the shank of the rack right into the receiver tube of our hitch. We're going to slide it in far enough so it lines up with our hitch pinhole. more
6/25/2014 9:18:21 AM
Saris Porter 4 Bike Rack Review - 2011 Subaru Outback Wagon- Video
Today on our 2011 Subaru Outback wagon we're going to be test fitting the Saris Bike Porter. This is a tilting-style 4-bike rack designed for use in 1-1/4" and 2" hitches, part number SA404B. Now to begin our test fit we'll slide the shank of the bike rack right into the receiver tube of our hitch. As we slide it in we want to be sure that the pinhole in our rack lines up with the pinhole in our hitch. With those in line we're going to take our anti-rattle bolt, slide it in from the left to the right, and tighten it down. We'll use a wrench for the final torque process. more
6/24/2014 12:21:08 PM
Saris Axis 3 Bike Rack Review - 2006 Subaru Outback Wagon- Video
Today, on our 2006, Subaru Outback Wagon, we're going to be test-fitting the Saris Axis, three bike rack, part number SA843B. We'll begin out test-fit by sliding the shank of our bike rack into the receiver tube of our hitch. We'll go ahead and line up our pin holes. We'll then take our anti-rattle bolt, and threat it through our pin holes. Now we'll go and tighten it down using our socket wrench. Once we have that tightened, we can secure it with the lock on the other side, and tightened it down with the anti-rattle bolt. It's going to take out any wobble that we may have inside of our hitch. more
3/18/2014 5:07:16 PM
Hollywood Racks Traveler 5 Hitch Bike Rack Review - 2006 Subaru Outback Wagon- Video
Today on our 2006 Subaru Outback wagon, we'll be test-fitting the Hollywood Rack Traveler 5-Bike Rack, part number HR9200. We'll begin our test fit by sliding the shank of our bike rack into the receiver tube of our hitch. We'll go ahead and line up our pin hole and then thread in our anti-rattle bolt. We'll go ahead and install it hand-tight and then finish securing it with our socket wrench. Tightening our anti-rattle system up is going to help remove rattle and wobble that we may have inside of our hitch. We'll go ahead and install our clip on our other side. more
3/18/2014 5:01:33 PM
Swagman Titan Hitch Bike Rack Review - 2006 Subaru Outback Wagon- Video
Today on our 2006 Subaru Outback Wagon, we're going to be test fitting the Swagman Titan 4 Bike Rack, part number S63410. To begin our test fit, we'll slide the shank of our bike rack into the receiver tube of our hitch. We'll go ahead and line up our pin holes, and then we can thread in our anti-rattle bolt. We're just going to go ahead and install it finger tight, and then we'll finish the securing process using our socket wrench. Tightening up our anti-rattle system is going to take out any rattle or wobble that we may have inside the hitch. We'll go ahead and install our clip on the other side. With our bike rack in this position, it's going to give us a ground clearance of right at about 14". more
3/17/2014 11:56:19 AM
Hollywood Racks Traveler Hitch Bike Rack Review - 2006 Subaru Outback Wagon- Video
Today on our 2006 Subaru Outback Wagon, we're to be test fitting the Hollywood Racks Traveler 4-bike rack, part number HR8500. To begin our test fit, we'll slide the shank of our bike rack into the receiver tube of our hitch. We'll go ahead and line up our pin holes, then we can thread in our anti-rattle bolt. Now, we're just installing this finger tight and then we'll grab our socket wrench and tighten it all the way down. This is going to help reduce the amount of wobble and rattle that we have inside of our hitch. We'll take our clip and secure it on the other side of our pin. With our bike rack in this position, it's going to give us a ground clearance of about 11". more
3/17/2014 11:51:56 AM
Thule Vertex 4 Hitch Bike Rack Review - 2011 Subaru Outback Wagon- Video
Today on our 2011 Subaru Outback Wagon we'll be test fitting the Thule Vertex 4-bike rack for 1 1/4 and 2 inch hitches, part number TH9029. We'll begin our test fit by sliding the shank of the bike rack into the receiver tube of the hitch. We'll line up our pin holes and thread in our anti-rattle bolt tightening it with a wrench. Now we'll go over a few clearance measurements. We have about 12 inches of ground clearance. The closest point of the bike rack to the rear of our Subaru is about 3 1/2 inches. We've added about 13 inches to the overall length of our vehicle. more
1/22/2014 1:06:19 PM
Thule Apex 4 Hitch Bike Rack Review - 2011 Subaru Outback Wagon- Video
Today on our 2011 Subaru Outback Wagon, we'll be test fitting the Thule Apex 4 Bike Rack for inch and a 1/4 and 2 inch hitches, Part Number TH9025. We'll being our test fit by sliding the shank of the bike rack into the receiver tube of the hitch allowing the attached hitch pin to fall into place and then using the hand knob to secure the bike rack to our vehicle and engage our anti-rattle device. Now we'll go over some clearance measurements. We have a ground clearance of about 12 inches. The closest point of the bike rack to the rear of our vehicle is about 2 inches. We've added about 12-1/2 inches to the overall length of our Subaru Outback Wagon. Now we'll pull the lever at the base of the bike rack, and allow it to tilt away from our vehicle. more
1/22/2014 1:03:09 PM
Thule Hitching Post Pro Hitch Bike Rack Review - 2006 Subaru Outback Wagon- Video
Today, on our 2006 Subaru Outback Wagon, we'll be test fitting the Thule Hitching Post Pro 4 Bike Rack for inch and a quarter and two inch hitches part numberTH934XTR. To begin our test fit we'll slide the shank of the bike rack into the receiver tube of the hitch, line up the pin hole, and thread in our anti-rattle bolt, tightening it with a wrench. Now, we'll go over a few clearance measurements. We have about 10 1/2 inches of ground clearance. The closest point of the bike rack to the rear of our vehicle is about four inches. We've added about 14 inches to the overall length of our Subaru Outback Wagon. We'll pull the safety pin at the base of the bike rack and allow it to tilt away fromour vehicle. more
11/7/2013 8:57:24 AM
Yakima StickUp 2 Hitch Bike Rack Review - 2006 Subaru Outback Wagon- Video
Today on a 2006 Subaru Outback Wagon, we'll be test fitting the Yakima Stickup 2 Bike Rack part number Y02420. This bike rack will accommodate an inch and a quarter in a 2 inch hitch. To begin our test fit, we'll slide the shank of the bike rack into the receiver tube of the hitch. We'll line upthe pin hole and thread in our anti-rattle bolt, tightening it with a wrench. Now we'll go over few clearance measurements. We have about 11 and a half inches of ground clearance. more
11/6/2013 9:23:46 AM
Thule Vertex 4 Hitch Bike Rack Review - 2006 Subaru Outback Wagon- Video
Today on our 2006 Subaru Outback Wagon, we'll be test fitting the Thule Vertex 4-Bike Rack for 1 1/4 inchand 2 inch hitches, part number TH9029. Webegin our test fit by sliding the shank of our bike rack into the receiver tube of the hitch. We'll line up the pin hole and thread in our anti-rattle bolt, tightening it with a wrench. Now, we'll go over a few clearance measurements. We have about 11 1/2 inches of ground clearance. The closes point of the bike rack to the rear of our Subaru is about 1/2 inch. more
11/6/2013 9:22:47 AM
Thule Apex 4 Swing Hitch Bike Rack Review - 2006 Subaru Outback Wagon- Video
Today on our 2006 Subaru Outback wagon well be test fitting the Thule Apex Swing four bike rack for two inch hitches, part number TH9027. To begin our test fit well slide the shank of the bike rack into the receiver tube of the hitch. Well line up the pin hole and allow the attached pin to fall into place. Well then tighten the hand knob at the rear of the shank to secure our bike rack to our vehicle and engage our anti-rattle device. Now well go over a few clearance measurements. We have about 11 1/2ches of ground clearance. more
11/6/2013 9:22:17 AM
Thule Apex 4 Hitch Bike Rack Review - 2006 Subaru Outback Wagon- Video
Today, on our 2006 Subaru Outback Wagon, we'll be test fitting the Thule Apex 4 Bike Rack for inch and a quarter and two inch hitches part number TH9025. We'll begin our test fit by sliding the shank of the bike rack in to the receiver tube of the hitch. Line up the pinhole and allow the attached pin to fall in to place. We can then tie it in the hand knob to secure our bike rack to our vehicle and engage our anti-rattle device. Now, we'll go over a few clearance measurements. We have about 11 inches of ground clearance. The closest point of our bike rack to the rear of our Subaru is about a inch and a half. more
11/6/2013 9:21:57 AM
SportRack Super EZ Hitch Bike Rack Review - 2006 Subaru Outback Wagon- Video
Today on our 2006 Subaru Outback wagon well be test fitting the Sportrack Super EZ platform style two bike rack for 1 and 2 inch hitches, part number SR2901LR. To begin our test fit well slide the shank of the bike rack into the receiver tube of the hitch. Well line up the pin hole and thread in our anti-rattle bolt, tightening it with a wrench and installing the lock on the other side. Now well go over a few clearance measurements. We have about 13 inches of ground clearance. The closest point of the bike rack to the rear of our Subaru is about eight inches, and weve added about 22 inches to the overall length of our vehicle. more
11/5/2013 10:00:22 AM
Filter Videos
Filter Videos
